From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Dave Jones <davej@redhat.com>,
Eric Dumazet <edumazet@google.com>,
"David S. Miller" <davem@davemloft.net>
Subject: [ 62/75] tun: add a missing nf_reset() in tun_net_xmit()
Date: Mon, 18 Mar 2013 14:07:25 -0700 [thread overview]
Message-ID: <20130318210514.715375259@linuxfoundation.org> (raw)
In-Reply-To: <20130318210510.203500214@linuxfoundation.org>
3.8-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit f8af75f3517a24838a36eb5797a1a3e60bf9e276 ]
Dave reported following crash :
general protection fault: 0000 [#1] SMP
CPU 2
Pid: 25407, comm: qemu-kvm Not tainted 3.7.9-205.fc18.x86_64 #1 Hewlett-Packard HP Z400 Workstation/0B4Ch
RIP: 0010:[<ffffffffa0399bd5>] [<ffffffffa0399bd5>] destroy_conntrack+0x35/0x120 [nf_conntrack]
RSP: 0018:ffff880276913d78 EFLAGS: 00010206
RAX: 50626b6b7876376c RBX: ffff88026e530d68 RCX: ffff88028d158e00
RDX: ffff88026d0d5470 RSI: 0000000000000011 RDI: 0000000000000002
RBP: ffff880276913d88 R08: 0000000000000000 R09: ffff880295002900
R10: 0000000000000000 R11: 0000000000000003 R12: ffffffff81ca3b40
R13: ffffffff8151a8e0 R14: ffff880270875000 R15: 0000000000000002
FS: 00007ff3bce38a00(0000) GS:ffff88029fc40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007fd1430bd000 CR3: 000000027042b000 CR4: 00000000000027e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process qemu-kvm (pid: 25407, threadinfo ffff880276912000, task ffff88028c369720)
Stack:
ffff880156f59100 ffff880156f59100 ffff880276913d98 ffffffff815534f7
ffff880276913db8 ffffffff8151a74b ffff880270875000 ffff880156f59100
ffff880276913dd8 ffffffff8151a5a6 ffff880276913dd8 ffff88026d0d5470
Call Trace:
[<ffffffff815534f7>] nf_conntrack_destroy+0x17/0x20
[<ffffffff8151a74b>] skb_release_head_state+0x7b/0x100
[<ffffffff8151a5a6>] __kfree_skb+0x16/0xa0
[<ffffffff8151a666>] kfree_skb+0x36/0xa0
[<ffffffff8151a8e0>] skb_queue_purge+0x20/0x40
[<ffffffffa02205f7>] __tun_detach+0x117/0x140 [tun]
[<ffffffffa022184c>] tun_chr_close+0x3c/0xd0 [tun]
[<ffffffff8119669c>] __fput+0xec/0x240
[<ffffffff811967fe>] ____fput+0xe/0x10
[<ffffffff8107eb27>] task_work_run+0xa7/0xe0
[<ffffffff810149e1>] do_notify_resume+0x71/0xb0
[<ffffffff81640152>] int_signal+0x12/0x17
Code: 00 00 04 48 89 e5 41 54 53 48 89 fb 4c 8b a7 e8 00 00 00 0f 85 de 00 00 00 0f b6 73 3e 0f b7 7b 2a e8 10 40 00 00 48 85 c0 74 0e <48> 8b 40 28 48 85 c0 74 05 48 89 df ff d0 48 c7 c7 08 6a 3a a0
RIP [<ffffffffa0399bd5>] destroy_conntrack+0x35/0x120 [nf_conntrack]
RSP <ffff880276913d78>
This is because tun_net_xmit() needs to call nf_reset()
before queuing skb into receive_queue
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/tun.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -748,6 +748,8 @@ static netdev_tx_t tun_net_xmit(struct s
goto drop;
skb_orphan(skb);
+ nf_reset(skb);
+
/* Enqueue packet */
skb_queue_tail(&tfile->socket.sk->sk_receive_queue, skb);
next prev parent reply other threads:[~2013-03-18 21:07 UTC|newest]
Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-18 21:06 [ 00/75] 3.8.4-stable review Greg Kroah-Hartman
2013-03-18 21:06 ` [ 01/75] qcaux: add Franklin U600 Greg Kroah-Hartman
2013-03-18 21:06 ` [ 02/75] xen/pciback: Dont disable a PCI device that is already disabled Greg Kroah-Hartman
2013-03-18 21:06 ` [ 03/75] virtio: rng: disallow multiple device registrations, fixes crashes Greg Kroah-Hartman
2013-03-18 21:06 ` [ 04/75] USB: option: add Huawei E5331 Greg Kroah-Hartman
2013-03-18 21:06 ` [ 05/75] USB: cdc-wdm: fix buffer overflow Greg Kroah-Hartman
2013-03-18 21:06 ` [ 06/75] tools: usb: ffs-test: Fix build failure Greg Kroah-Hartman
2013-03-18 21:06 ` [ 07/75] usb: dwc3: core: dont forget to free coherent memory Greg Kroah-Hartman
2013-03-18 21:06 ` [ 08/75] usb: cp210x new Vendor/Device IDs Greg Kroah-Hartman
2013-03-18 21:06 ` [ 09/75] USB: added support for Cinterions products AH6 and PLS8 Greg Kroah-Hartman
2013-03-18 21:06 ` [ 10/75] usb: serial: Add Rigblaster Advantage to device table Greg Kroah-Hartman
2013-03-18 21:06 ` [ 11/75] USB: storage: fix Huawei mode switching regression Greg Kroah-Hartman
2013-03-18 21:06 ` [ 12/75] USB: EHCI: work around silicon bug in Intels EHCI controllers Greg Kroah-Hartman
2013-03-19 16:34 ` Sven Joachim
2013-03-19 18:17 ` Alan Stern
2013-03-19 18:43 ` Sven Joachim
2013-03-19 20:10 ` Alan Stern
2013-03-19 20:28 ` Sven Joachim
2013-03-19 21:00 ` Alan Stern
2013-03-19 21:44 ` Sven Joachim
2013-03-20 20:08 ` Greg Kroah-Hartman
2013-03-20 20:14 ` Sven Joachim
2013-03-20 20:28 ` Greg Kroah-Hartman
2013-03-20 20:41 ` Alan Stern
2013-03-20 22:28 ` Greg Kroah-Hartman
2013-03-21 14:35 ` Alan Stern
2013-03-19 18:03 ` Stephen Warren
2013-03-18 21:06 ` [ 13/75] USB: EHCI: dont check DMA values in QH overlays Greg Kroah-Hartman
2013-03-18 21:06 ` [ 14/75] staging: vt6656: Fix oops on resume from suspend Greg Kroah-Hartman
2013-03-18 21:06 ` [ 15/75] staging: comedi: dt9812: use CR_CHAN() for channel number Greg Kroah-Hartman
2013-03-18 21:06 ` [ 16/75] qcserial: bind to DM/DIAG port on Gobi 1K devices Greg Kroah-Hartman
2013-03-18 21:06 ` [ 17/75] signal: always clear sa_restorer on execve Greg Kroah-Hartman
2013-03-18 21:06 ` [ 18/75] ext3: Fix format string issues Greg Kroah-Hartman
2013-03-18 21:06 ` [ 19/75] tty/8250_pnp: serial port detection regression since v3.7 Greg Kroah-Hartman
2013-03-18 21:06 ` [ 20/75] serial: 8250: Keep 8250.<xxxx> module options functional after driver rename Greg Kroah-Hartman
2013-03-18 21:06 ` [ 21/75] serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller Greg Kroah-Hartman
2013-03-18 21:06 ` [ 22/75] tty: serial: fix typo "ARCH_S5P6450" Greg Kroah-Hartman
2013-03-18 21:06 ` [ 23/75] tty: serial: fix typo "SERIAL_S3C2412" Greg Kroah-Hartman
2013-03-18 21:06 ` [ 24/75] tty/serial: Add support for Altera serial port Greg Kroah-Hartman
2013-03-18 21:06 ` [ 25/75] TTY: disable debugging warning Greg Kroah-Hartman
2013-03-18 21:06 ` [ 26/75] TTY: do not reset masters packet mode Greg Kroah-Hartman
2013-03-18 21:06 ` [ 27/75] Fix 4 port and add support for 8 port Unknown PCI serial port cards Greg Kroah-Hartman
2013-03-18 21:06 ` [ 28/75] ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels Greg Kroah-Hartman
2013-03-18 21:06 ` [ 29/75] perf,x86: fix kernel crash with PEBS/BTS after suspend/resume Greg Kroah-Hartman
2013-03-18 21:11 ` Stephane Eranian
2013-03-18 21:20 ` Greg Kroah-Hartman
2013-03-18 21:35 ` Stephane Eranian
2013-03-18 23:00 ` Greg Kroah-Hartman
2013-03-18 21:06 ` [ 30/75] ALSA: seq: Fix missing error handling in snd_seq_timer_open() Greg Kroah-Hartman
2013-03-18 21:06 ` [ 31/75] ARM: w1-gpio: fix erroneous gpio requests Greg Kroah-Hartman
2013-03-18 21:06 ` [ 32/75] hwmon: (pmbus/ltc2978) Fix temperature reporting Greg Kroah-Hartman
2013-03-18 21:06 ` [ 33/75] hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes Greg Kroah-Hartman
2013-03-18 21:06 ` [ 34/75] w1-gpio: remove erroneous __exit and __exit_p() Greg Kroah-Hartman
2013-03-18 21:06 ` [ 35/75] w1: fix oops when w1_search is called from netlink connector Greg Kroah-Hartman
2013-03-18 21:06 ` [ 36/75] powerpc: Fix STAB initialization Greg Kroah-Hartman
2013-03-18 21:07 ` [ 37/75] powerpc: Fix cputable entry for 970MP rev 1.0 Greg Kroah-Hartman
2013-03-18 21:07 ` [ 38/75] powerpc: Make VSID_BITS* dependency explicit Greg Kroah-Hartman
2013-03-18 21:07 ` [ 39/75] powerpc: Update kernel VSID range Greg Kroah-Hartman
2013-03-18 21:07 ` [ 40/75] powerpc: Rename USER_ESID_BITS* to ESID_BITS* Greg Kroah-Hartman
2013-03-18 21:07 ` [ 41/75] ARM: davinci: edma: fix dmaengine induced null pointer dereference on da830 Greg Kroah-Hartman
2013-03-19 16:25 ` Luis Henriques
[not found] ` <f20a6d0dd7604c0fa6ed95604a8dfb35@DLEE70.ent.ti.com>
2013-03-19 17:27 ` Matt Porter
2013-03-19 18:25 ` Luis Henriques
2013-03-18 21:07 ` [ 42/75] selinux: use GFP_ATOMIC under spin_lock Greg Kroah-Hartman
2013-03-18 21:07 ` [ 43/75] perf,x86: fix wrmsr_on_cpu() warning on suspend/resume Greg Kroah-Hartman
2013-03-18 21:07 ` [ 44/75] perf,x86: fix link failure for non-Intel configs Greg Kroah-Hartman
2013-03-18 21:07 ` [ 45/75] s390: critical section cleanup vs. machine checks Greg Kroah-Hartman
2013-03-18 21:07 ` [ 46/75] s390/mm: fix flush_tlb_kernel_range() Greg Kroah-Hartman
2013-03-18 21:07 ` [ 47/75] btrfs: use rcu_barrier() to wait for bdev puts at unmount Greg Kroah-Hartman
2013-03-18 21:07 ` [ 48/75] mtd: nand: reintroduce NAND_NO_READRDY as NAND_NEED_READRDY Greg Kroah-Hartman
2013-03-18 21:07 ` [ 49/75] kbuild: fix make headers_check with make 3.80 Greg Kroah-Hartman
2013-03-18 21:07 ` [ 50/75] atmel_lcdfb: fix 16-bpp modes on older SOCs Greg Kroah-Hartman
2013-03-18 21:07 ` [ 51/75] net/mlx4_en: Initialize RFS filters lock and list in init_netdev Greg Kroah-Hartman
2013-03-18 21:07 ` [ 52/75] net/mlx4_en: Disable RFS when running in SRIOV mode Greg Kroah-Hartman
2013-03-18 21:07 ` [ 53/75] block: use i_size_write() in bd_set_size() Greg Kroah-Hartman
2013-03-18 21:07 ` [ 54/75] loopdev: fix a deadlock Greg Kroah-Hartman
2013-03-18 21:07 ` [ 55/75] loopdev: remove an user triggerable oops Greg Kroah-Hartman
2013-03-18 21:07 ` [ 56/75] net/sctp: Validate parameter size for SCTP_GET_ASSOC_STATS Greg Kroah-Hartman
2013-03-18 21:07 ` [ 57/75] l2tp: Restore socket refcount when sendmsg succeeds Greg Kroah-Hartman
2013-03-18 21:07 ` [ 58/75] atl1c: restore buffer state Greg Kroah-Hartman
2013-03-18 21:07 ` [ 59/75] rds: limit the size allocated by rds_message_alloc() Greg Kroah-Hartman
2013-03-18 21:07 ` [ 60/75] net: ipv6: Dont purge default router if accept_ra=2 Greg Kroah-Hartman
2013-03-18 21:07 ` [ 61/75] tcp: fix double-counted receiver RTT when leaving receiver fast path Greg Kroah-Hartman
2013-03-18 21:07 ` Greg Kroah-Hartman [this message]
2013-03-18 21:07 ` [ 63/75] vxlan: fix oops when delete netns containing vxlan Greg Kroah-Hartman
2013-03-18 21:07 ` [ 64/75] bonding: fire NETDEV_RELEASE event only on 0 slaves Greg Kroah-Hartman
2013-03-18 21:07 ` [ 65/75] team: unsyc the devices addresses when port is removed Greg Kroah-Hartman
2013-03-18 21:07 ` [ 66/75] macvlan: Set IFF_UNICAST_FLT flag to prevent unnecessary promisc mode Greg Kroah-Hartman
2013-03-18 21:07 ` [ 67/75] netlabel: correctly list all the static label mappings Greg Kroah-Hartman
2013-03-18 21:07 ` [ 68/75] bridging: fix rx_handlers return code Greg Kroah-Hartman
2013-03-18 21:07 ` [ 69/75] ipv6: stop multicast forwarding to process interface scoped addresses Greg Kroah-Hartman
2013-03-18 21:07 ` [ 70/75] bridge: fix mdb info leaks Greg Kroah-Hartman
2013-03-18 21:07 ` [ 71/75] rtnl: fix info leak on RTM_GETLINK request for VF devices Greg Kroah-Hartman
2013-03-18 21:07 ` [ 72/75] dcbnl: fix various netlink info leaks Greg Kroah-Hartman
2013-03-18 21:07 ` [ 73/75] 6lowpan: Fix endianness issue in is_addr_link_local() Greg Kroah-Hartman
2013-03-18 21:07 ` [ 74/75] Revert "drm/i915: enable irqs earlier when resuming" Greg Kroah-Hartman
2013-03-27 15:45 ` Ilya Tumaykin
2013-03-27 16:52 ` Daniel Vetter
2013-03-18 21:07 ` [ 75/75] Revert "drm/i915: reorder setup sequence to have irqs for output setup" Greg Kroah-Hartman
2013-03-19 0:51 ` [ 00/75] 3.8.4-stable review Shuah Khan
2013-03-19 0:57 ` Greg Kroah-Hartman
2013-03-19 1:09 ` Shuah Khan
2013-03-19 2:00 ` Greg Kroah-Hartman
2013-03-19 4:00 ` Shuah Khan
2013-03-19 4:07 ` Greg Kroah-Hartman
2013-03-19 15:51 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130318210514.715375259@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=davej@redhat.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome