mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Pavel Machek <pavel@denx.de>
To: Jamie Iles <jamie@jamieiles.com>
Cc: dinguyen@altera.com, wd@denx.de,
	linux-arm-kernel@lists.infradead.org, olof@lixom.net,
	arnd@arndb.de, johnstul@us.ibm.com, tglx@linutronix.de,
	kernel list <linux-kernel@vger.kernel.org>
Subject: Re: dw_apb_timer_of.c: remove parts that were picoxcell-specific
Date: Fri, 26 Apr 2013 23:37:23 +0200	[thread overview]
Message-ID: <20130426213723.GA24891@amd.pavel.ucw.cz> (raw)
In-Reply-To: <20130426124128.GB6946@page>

Hi!

> On Fri, Apr 26, 2013 at 02:14:34PM +0200, Pavel Machek wrote:
> > diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c
> > index 70b441a..22759f5 100644
> > --- a/arch/arm/mach-picoxcell/common.c
> > +++ b/arch/arm/mach-picoxcell/common.c
> > @@ -84,11 +84,39 @@ static void picoxcell_wdt_restart(char mode, const char *cmd)
> >  	}
> >  }
> >  
> > +static const struct of_device_id picochip_rtc_ids[] __initconst = {
> > +        { .compatible = "picochip,pc3x2-rtc" },
> > +        { /* Sentinel */ },
> > +};
> > +
> > +static void __iomem *sched_io_base;
> > +
> > +static u32 read_sched_clock(void)
> > +{
> > +        return __raw_readl(sched_io_base);
> > +}
> > +
> > +static void __init timer_init(void)
> > +{
> > +	u32 rate;
> > +
> > +	dw_apb_timer_init(0);
> > +
> > +	sched_timer = of_find_matching_node(timer, osctimer_ids);
> > +	if (!sched_timer)
> > +		panic("No suitable timer for scheduler clock\n");
> > +
> > +	timer_get_base_and_rate(sched_timer, &sched_io_base, &rate);
> > +	of_node_put(sched_timer);
> 
> This doesn't work as osctimer_ids is private to the dw_apb_timer files 
> as is timer_get_base_and_rate.  The other timer is unused in picoxcell 
> though so dw_apb_timer_init(1), something like the patch below on top of 
> yours.

That would still not compile due to common.h. ... _but_ it allows
some very nice simplification, with this on top:

I'll post merged-up patch in next mail.

Thanks,
									Pavel

diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c
index c027920..70b441a 100644
--- a/arch/arm/mach-picoxcell/common.c
+++ b/arch/arm/mach-picoxcell/common.c
@@ -84,16 +84,11 @@ static void picoxcell_wdt_restart(char mode, const char *cmd)
 	}
 }
 
-static void __init timer_init(void)
-{
-	dw_apb_timer_init(1);
-}
-
 DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
 	.map_io		= picoxcell_map_io,
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= irqchip_init,
-	.init_time	= timer_init,
+	.init_time	= dw_apb_timer_init,
 	.init_machine	= picoxcell_init_machine,
 	.dt_compat	= picoxcell_dt_match,
 	.restart	= picoxcell_wdt_restart,
diff --git a/arch/arm/mach-picoxcell/common.h b/arch/arm/mach-picoxcell/common.h
index 481b42a..237fb3b 100644
--- a/arch/arm/mach-picoxcell/common.h
+++ b/arch/arm/mach-picoxcell/common.h
@@ -12,6 +12,4 @@
 
 #include <asm/mach/time.h>
 
-extern void dw_apb_timer_init(void);
-
 #endif /* __PICOXCELL_COMMON_H__ */
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index 6efbc12..81b8f1e 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -110,17 +110,11 @@ static const char *altera_dt_match[] = {
 	NULL
 };
 
-static void __init timer_init(void)
-{
-	dw_apb_timer_init(1);
-}
-
-
 DT_MACHINE_START(SOCFPGA, "Altera SOCFPGA")
 	.smp		= smp_ops(socfpga_smp_ops),
 	.map_io		= socfpga_map_io,
 	.init_irq	= socfpga_init_irq,
-	.init_time	= timer_init,
+	.init_time	= dw_apb_timer_init,
 	.init_machine	= socfpga_cyclone5_init,
 	.restart	= socfpga_cyclone5_restart,
 	.dt_compat	= altera_dt_match,
diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
index 872ce66..0fa3104 100644
--- a/drivers/clocksource/dw_apb_timer_of.c
+++ b/drivers/clocksource/dw_apb_timer_of.c
@@ -66,7 +66,7 @@ static u32 read_sched_clock_sptimer(void)
 	return ~__raw_readl(sched_io_base + APBTMR_N_CURRENT_VALUE);
 }
 
-static void add_clocksource(struct device_node *source_timer, int use_as_scheduler)
+static void add_clocksource(struct device_node *source_timer)
 {
 	void __iomem *iobase;
 	struct dw_apb_clocksource *cs;
@@ -81,10 +81,8 @@ static void add_clocksource(struct device_node *source_timer, int use_as_schedul
 	dw_apb_clocksource_start(cs);
 	dw_apb_clocksource_register(cs);
 
-	if (use_as_scheduler) {
-		sched_io_base = iobase;
-		setup_sched_clock(read_sched_clock_sptimer, 32, rate);
-	}
+	sched_io_base = iobase;
+	setup_sched_clock(read_sched_clock_sptimer, 32, rate);
 }
 
 static const struct of_device_id osctimer_ids[] __initconst = {
@@ -104,7 +102,7 @@ static const struct of_device_id osctimer_ids[] __initconst = {
 */
 
 
-void __init dw_apb_timer_init(int use_as_scheduler)
+void __init dw_apb_timer_init(void)
 {
 	struct device_node *event_timer, *source_timer;
 
@@ -116,7 +114,7 @@ void __init dw_apb_timer_init(int use_as_scheduler)
 	source_timer = of_find_matching_node(event_timer, osctimer_ids);
 	if (!source_timer)
 		panic("No timer for clocksource");
-	add_clocksource(source_timer, use_as_scheduler);
+	add_clocksource(source_timer);
 
 	of_node_put(event_timer);
 	of_node_put(source_timer);
diff --git a/include/linux/dw_apb_timer.h b/include/linux/dw_apb_timer.h
index d503245..a64c987 100644
--- a/include/linux/dw_apb_timer.h
+++ b/include/linux/dw_apb_timer.h
@@ -59,5 +59,5 @@ void dw_apb_clocksource_start(struct dw_apb_clocksource *dw_cs);
 cycle_t dw_apb_clocksource_read(struct dw_apb_clocksource *dw_cs);
 void dw_apb_clocksource_unregister(struct dw_apb_clocksource *dw_cs);
 
-extern void dw_apb_timer_init(int);
+extern void dw_apb_timer_init(void);
 #endif /* __DW_APB_TIMER_H__ */


-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

  reply	other threads:[~2013-04-26 21:37 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-26 12:14 Pavel Machek
2013-04-26 12:41 ` Jamie Iles
2013-04-26 21:37   ` Pavel Machek [this message]
2013-04-26 21:43     ` Pavel Machek
2013-05-06 12:48       ` Pavel Machek
2013-05-06 13:45         ` Arnd Bergmann
2013-05-06 15:53           ` Pavel Machek
2013-05-06 21:24             ` Arnd Bergmann
2013-05-07 13:57               ` Pavel Machek
2013-05-07 16:39                 ` John Stultz
2013-05-07 20:11                   ` Pavel Machek
2013-05-08  0:30                     ` John Stultz
2013-05-10 12:38                       ` Pavel Machek
2013-05-07 20:13                   ` Pavel Machek
2013-05-07  9:36       ` Jamie Iles

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130426213723.GA24891@amd.pavel.ucw.cz \
    --to=pavel@denx.de \
    --cc=arnd@arndb.de \
    --cc=dinguyen@altera.com \
    --cc=jamie@jamieiles.com \
    --cc=johnstul@us.ibm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=olof@lixom.net \
    --cc=tglx@linutronix.de \
    --cc=wd@denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®