From: Pavel Machek <pavel@denx.de>
To: John Stultz <john.stultz@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>,
tglx@linutronix.de, Jamie Iles <jamie@jamieiles.com>,
dinguyen@altera.com, wd@denx.de,
linux-arm-kernel@lists.infradead.org, olof@lixom.net,
kernel list <linux-kernel@vger.kernel.org>
Subject: Re: dw_apb_timer_of.c: remove parts that were picoxcell-specific
Date: Tue, 7 May 2013 22:11:26 +0200 [thread overview]
Message-ID: <20130507201126.GA8169@amd.pavel.ucw.cz> (raw)
In-Reply-To: <51892E5E.8090909@linaro.org>
Hi!
> >>>So I guess it should go through the timekeeping tree...?
> >>I would prefer that, but we can also take it through arm-soc, it doesn't
> >>really matter.
> >I see no response from timekeeping people... so if you could take it,
> >that would be great.
>
> I don't think the original patch ever made it to my inbox.
For some reason, I cced johnstul@us.ibm.com. (I guess
get_maintainer.pl? But it seems to behave now.) Anyway, patch is
below...
It would be great if you could apply it... Thanks,
Pavel
----
It seems we made a mistake when creating dw_apb_timer_of.c:
picoxcell sched_clock had parts that were not related to
dw_apb_timer, yet we moved them to dw_apb_timer_of, and tried to
use them on socfpga.
This results in system where user/system time is not measured
properly, as demonstrated by
time dd if=/dev/urandom of=/dev/zero bs=100000 count=100
So this patch switches sched_clock to hardware that exists on both
platforms, and adds missing of_node_put() in dw_apb_timer_init().
Signed-off-by: Pavel Machek <pavel@denx.de>
Acked-by: Jamie Iles <jamie@jamieiles.com>
diff --git a/arch/arm/mach-picoxcell/common.h b/arch/arm/mach-picoxcell/common.h
index 481b42a..237fb3b 100644
--- a/arch/arm/mach-picoxcell/common.h
+++ b/arch/arm/mach-picoxcell/common.h
@@ -12,6 +12,4 @@
#include <asm/mach/time.h>
-extern void dw_apb_timer_init(void);
-
#endif /* __PICOXCELL_COMMON_H__ */
diff --git a/drivers/clocksource/dw_apb_timer.c b/drivers/clocksource/dw_apb_timer.c
index 8c2a35f..460ac99 100644
--- a/drivers/clocksource/dw_apb_timer.c
+++ b/drivers/clocksource/dw_apb_timer.c
@@ -21,12 +21,6 @@
#define APBT_MIN_PERIOD 4
#define APBT_MIN_DELTA_USEC 200
-#define APBTMR_N_LOAD_COUNT 0x00
-#define APBTMR_N_CURRENT_VALUE 0x04
-#define APBTMR_N_CONTROL 0x08
-#define APBTMR_N_EOI 0x0c
-#define APBTMR_N_INT_STATUS 0x10
-
#define APBTMRS_INT_STATUS 0xa0
#define APBTMRS_EOI 0xa4
#define APBTMRS_RAW_INT_STATUS 0xa8
diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
index ab09ed3..0fa3104 100644
--- a/drivers/clocksource/dw_apb_timer_of.c
+++ b/drivers/clocksource/dw_apb_timer_of.c
@@ -57,6 +57,15 @@ static void add_clockevent(struct device_node *event_timer)
dw_apb_clockevent_register(ced);
}
+static void __iomem *sched_io_base;
+
+/* This is actually same as __apbt_read_clocksource(), but with
+ different interface */
+static u32 read_sched_clock_sptimer(void)
+{
+ return ~__raw_readl(sched_io_base + APBTMR_N_CURRENT_VALUE);
+}
+
static void add_clocksource(struct device_node *source_timer)
{
void __iomem *iobase;
@@ -71,41 +80,27 @@ static void add_clocksource(struct device_node *source_timer)
dw_apb_clocksource_start(cs);
dw_apb_clocksource_register(cs);
-}
-static void __iomem *sched_io_base;
-
-static u32 read_sched_clock(void)
-{
- return __raw_readl(sched_io_base);
+ sched_io_base = iobase;
+ setup_sched_clock(read_sched_clock_sptimer, 32, rate);
}
-static const struct of_device_id sptimer_ids[] __initconst = {
- { .compatible = "picochip,pc3x2-rtc" },
+static const struct of_device_id osctimer_ids[] __initconst = {
+ { .compatible = "picochip,pc3x2-timer" },
+ { .compatible = "snps,dw-apb-timer-osc" },
{ .compatible = "snps,dw-apb-timer-sp" },
- { /* Sentinel */ },
+ { /* Sentinel */ },
};
-static void init_sched_clock(void)
-{
- struct device_node *sched_timer;
- u32 rate;
-
- sched_timer = of_find_matching_node(NULL, sptimer_ids);
- if (!sched_timer)
- panic("No RTC for sched clock to use");
+/*
+ You don't have to use dw_apb_timer for scheduler clock,
+ this should also work fine on arm:
- timer_get_base_and_rate(sched_timer, &sched_io_base, &rate);
- of_node_put(sched_timer);
+ twd_local_timer_of_register();
+ arch_timer_of_register();
+ arch_timer_sched_clock_init();
+*/
- setup_sched_clock(read_sched_clock, 32, rate);
-}
-
-static const struct of_device_id osctimer_ids[] __initconst = {
- { .compatible = "picochip,pc3x2-timer" },
- { .compatible = "snps,dw-apb-timer-osc" },
- {},
-};
void __init dw_apb_timer_init(void)
{
@@ -121,7 +116,6 @@ void __init dw_apb_timer_init(void)
panic("No timer for clocksource");
add_clocksource(source_timer);
+ of_node_put(event_timer);
of_node_put(source_timer);
-
- init_sched_clock();
}
diff --git a/include/linux/dw_apb_timer.h b/include/linux/dw_apb_timer.h
index dd755ce..a64c987 100644
--- a/include/linux/dw_apb_timer.h
+++ b/include/linux/dw_apb_timer.h
@@ -17,6 +17,12 @@
#include <linux/clocksource.h>
#include <linux/interrupt.h>
+#define APBTMR_N_LOAD_COUNT 0x00
+#define APBTMR_N_CURRENT_VALUE 0x04
+#define APBTMR_N_CONTROL 0x08
+#define APBTMR_N_EOI 0x0c
+#define APBTMR_N_INT_STATUS 0x10
+
#define APBTMRS_REG_SIZE 0x14
struct dw_apb_timer {
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next prev parent reply other threads:[~2013-05-07 20:11 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-26 12:14 Pavel Machek
2013-04-26 12:41 ` Jamie Iles
2013-04-26 21:37 ` Pavel Machek
2013-04-26 21:43 ` Pavel Machek
2013-05-06 12:48 ` Pavel Machek
2013-05-06 13:45 ` Arnd Bergmann
2013-05-06 15:53 ` Pavel Machek
2013-05-06 21:24 ` Arnd Bergmann
2013-05-07 13:57 ` Pavel Machek
2013-05-07 16:39 ` John Stultz
2013-05-07 20:11 ` Pavel Machek [this message]
2013-05-08 0:30 ` John Stultz
2013-05-10 12:38 ` Pavel Machek
2013-05-07 20:13 ` Pavel Machek
2013-05-07 9:36 ` Jamie Iles
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130507201126.GA8169@amd.pavel.ucw.cz \
--to=pavel@denx.de \
--cc=arnd@arndb.de \
--cc=dinguyen@altera.com \
--cc=jamie@jamieiles.com \
--cc=john.stultz@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olof@lixom.net \
--cc=tglx@linutronix.de \
--cc=wd@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®