[PATCH] ARM: dove: add si5351 clock driver to CuBox DT

[PATCH] ARM: dove: add si5351 clock driver to CuBox DT

[Sebastian Hesselbarth]

This patch adds the device tree node for si5351 clock generator
and the corresponding oscillator connected to it. It also limits
i2c frequency to 100kHz as there are bus locks reported on higher
frequencies.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 arch/arm/boot/dts/dove-cubox.dts |   51 +++++++++++++++++++++++++++++++++++++-
 1 files changed, 50 insertions(+), 1 deletions(-)

diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index 7e3065a..5cae2ab 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -44,11 +44,60 @@
 			gpio = <&gpio0 1 0>;
 		};
 	};
+
+	clocks {
+		/* 25MHz reference crystal */
+		ref25: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
 };
 
 &uart0 { status = "okay"; };
 &sata0 { status = "okay"; };
-&i2c0 { status = "okay"; };
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	si5351: clock-generator {
+		compatible = "silabs,si5351a-msop";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#clock-cells = <1>;
+
+		/* connect xtal input to 25MHz reference */
+		clocks = <&ref25>;
+
+		/* connect xtal input as source of pll0 and pll1 */
+		silabs,pll-source = <0 0>, <1 0>;
+
+		clkout0 {
+			reg = <0>;
+			silabs,drive-strength = <8>;
+			silabs,multisynth-source = <0>;
+			silabs,clock-source = <0>;
+			silabs,pll-master;
+		};
+
+		clkout1 {
+			reg = <1>;
+			silabs,drive-strength = <8>;
+			silabs,multisynth-source = <1>;
+			silabs,clock-source = <0>;
+			silabs,pll-master;
+		};
+
+		clkout2 {
+			reg = <2>;
+			silabs,multisynth-source = <1>;
+			silabs,clock-source = <0>;
+		};
+	};
+};
 
 &sdio0 {
 	status = "okay";
-- 
1.7.2.5

Re: [PATCH] ARM: dove: add si5351 clock driver to CuBox DT

[Jason Cooper]

On Tue, Apr 30, 2013 at 07:24:35PM +0200, Sebastian Hesselbarth wrote:
> This patch adds the device tree node for si5351 clock generator
> and the corresponding oscillator connected to it. It also limits
> i2c frequency to 100kHz as there are bus locks reported on higher
> frequencies.
> 
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> ---
> Cc: Russell King <linux@arm.linux.org.uk>
> Cc: Jason Cooper <jason@lakedaemon.net>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> ---
>  arch/arm/boot/dts/dove-cubox.dts |   51 +++++++++++++++++++++++++++++++++++++-
>  1 files changed, 50 insertions(+), 1 deletions(-)

Applied to mvebu/dt

thx,

Jason.