From: Marcelo Tosatti <mtosatti@redhat.com>
To: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: gleb@redhat.com, avi.kivity@gmail.com, pbonzini@redhat.com,
linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Subject: Re: [PATCH 03/12] KVM: MMU: lazily drop large spte
Date: Fri, 2 Aug 2013 11:55:24 -0300 [thread overview]
Message-ID: <20130802145524.GA3501@amt.cnet> (raw)
In-Reply-To: <1375189330-24066-4-git-send-email-xiaoguangrong@linux.vnet.ibm.com>
On Tue, Jul 30, 2013 at 09:02:01PM +0800, Xiao Guangrong wrote:
> Currently, kvm zaps the large spte if write-protected is needed, the later
> read can fault on that spte. Actually, we can make the large spte readonly
> instead of making them un-present, the page fault caused by read access can
> be avoided
>
> The idea is from Avi:
> | As I mentioned before, write-protecting a large spte is a good idea,
> | since it moves some work from protect-time to fault-time, so it reduces
> | jitter. This removes the need for the return value.
>
> [
> It has fixed the issue reported in 6b73a9606 by stopping fast page fault
> marking the large spte to writable
> ]
Xiao,
Can you please write a comment explaining why are the problems
with shadow vs large read-only sptes (can't recall anymore),
and then why it is now safe to do it.
Comments below.
> Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
> ---
> arch/x86/kvm/mmu.c | 36 +++++++++++++++++-------------------
> 1 file changed, 17 insertions(+), 19 deletions(-)
>
> diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
> index cf163ca..35d4b50 100644
> --- a/arch/x86/kvm/mmu.c
> +++ b/arch/x86/kvm/mmu.c
> @@ -1181,8 +1181,7 @@ static void drop_large_spte(struct kvm_vcpu *vcpu, u64 *sptep)
>
> /*
> * Write-protect on the specified @sptep, @pt_protect indicates whether
> - * spte writ-protection is caused by protecting shadow page table.
> - * @flush indicates whether tlb need be flushed.
> + * spte write-protection is caused by protecting shadow page table.
> *
> * Note: write protection is difference between drity logging and spte
> * protection:
> @@ -1191,10 +1190,9 @@ static void drop_large_spte(struct kvm_vcpu *vcpu, u64 *sptep)
> * - for spte protection, the spte can be writable only after unsync-ing
> * shadow page.
> *
> - * Return true if the spte is dropped.
> + * Return true if tlb need be flushed.
> */
> -static bool
> -spte_write_protect(struct kvm *kvm, u64 *sptep, bool *flush, bool pt_protect)
> +static bool spte_write_protect(struct kvm *kvm, u64 *sptep, bool pt_protect)
> {
> u64 spte = *sptep;
>
> @@ -1204,17 +1202,11 @@ spte_write_protect(struct kvm *kvm, u64 *sptep, bool *flush, bool pt_protect)
>
> rmap_printk("rmap_write_protect: spte %p %llx\n", sptep, *sptep);
>
> - if (__drop_large_spte(kvm, sptep)) {
> - *flush |= true;
> - return true;
> - }
> -
> if (pt_protect)
> spte &= ~SPTE_MMU_WRITEABLE;
> spte = spte & ~PT_WRITABLE_MASK;
>
> - *flush |= mmu_spte_update(sptep, spte);
> - return false;
> + return mmu_spte_update(sptep, spte);
> }
>
> static bool __rmap_write_protect(struct kvm *kvm, unsigned long *rmapp,
> @@ -1226,11 +1218,8 @@ static bool __rmap_write_protect(struct kvm *kvm, unsigned long *rmapp,
>
> for (sptep = rmap_get_first(*rmapp, &iter); sptep;) {
> BUG_ON(!(*sptep & PT_PRESENT_MASK));
> - if (spte_write_protect(kvm, sptep, &flush, pt_protect)) {
> - sptep = rmap_get_first(*rmapp, &iter);
> - continue;
> - }
>
> + flush |= spte_write_protect(kvm, sptep, pt_protect);
> sptep = rmap_get_next(&iter);
> }
>
> @@ -2701,6 +2690,8 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
> break;
> }
>
> + drop_large_spte(vcpu, iterator.sptep);
> +
> if (!is_shadow_present_pte(*iterator.sptep)) {
> u64 base_addr = iterator.addr;
>
> @@ -2855,7 +2846,7 @@ fast_pf_fix_direct_spte(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
> * - false: let the real page fault path to fix it.
> */
> static bool fast_page_fault(struct kvm_vcpu *vcpu, gva_t gva, int level,
> - u32 error_code)
> + u32 error_code, bool force_pt_level)
> {
> struct kvm_shadow_walk_iterator iterator;
> struct kvm_mmu_page *sp;
> @@ -2884,6 +2875,13 @@ static bool fast_page_fault(struct kvm_vcpu *vcpu, gva_t gva, int level,
> goto exit;
>
> /*
> + * Can not map the large spte to writable if the page is dirty
> + * logged.
> + */
> + if (sp->role.level > PT_PAGE_TABLE_LEVEL && force_pt_level)
> + goto exit;
> +
It is not safe to derive slot->dirty_bitmap like this:
since dirty log is enabled via RCU update, "is dirty bitmap enabled"
info could be stale by the time you check it here via the parameter,
so you can instantiate a large spte (because force_pt_level == false),
while you should not.
next prev parent reply other threads:[~2013-08-02 14:55 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-30 13:01 [RFC PATCH 00/12] KVM: MMU: locklessly wirte-protect Xiao Guangrong
2013-07-30 13:01 ` [PATCH 01/12] KVM: MMU: remove unused parameter Xiao Guangrong
2013-08-29 7:22 ` Gleb Natapov
2013-07-30 13:02 ` [PATCH 02/12] KVM: MMU: properly check last spte in fast_page_fault() Xiao Guangrong
2013-07-30 13:02 ` [PATCH 03/12] KVM: MMU: lazily drop large spte Xiao Guangrong
2013-08-02 14:55 ` Marcelo Tosatti [this message]
2013-08-02 15:42 ` Xiao Guangrong
2013-08-02 20:27 ` Marcelo Tosatti
2013-08-02 22:56 ` Xiao Guangrong
2013-07-30 13:02 ` [PATCH 04/12] KVM: MMU: log dirty page after marking spte writable Xiao Guangrong
2013-07-30 13:26 ` Paolo Bonzini
2013-07-31 7:25 ` Xiao Guangrong
2013-08-07 1:48 ` Marcelo Tosatti
2013-08-07 4:06 ` Xiao Guangrong
2013-08-08 15:06 ` Marcelo Tosatti
2013-08-08 16:26 ` Xiao Guangrong
2013-11-20 0:29 ` Marcelo Tosatti
2013-11-20 0:35 ` Marcelo Tosatti
2013-11-20 14:20 ` Xiao Guangrong
2013-11-20 19:47 ` Marcelo Tosatti
2013-11-21 4:26 ` Xiao Guangrong
2013-07-30 13:02 ` [PATCH 05/12] KVM: MMU: add spte into rmap before logging dirty page Xiao Guangrong
2013-07-30 13:27 ` Paolo Bonzini
2013-07-31 7:33 ` Xiao Guangrong
2013-07-30 13:02 ` [PATCH 06/12] KVM: MMU: flush tlb if the spte can be locklessly modified Xiao Guangrong
2013-08-28 7:23 ` Gleb Natapov
2013-08-28 7:50 ` Xiao Guangrong
2013-07-30 13:02 ` [PATCH 07/12] KVM: MMU: redesign the algorithm of pte_list Xiao Guangrong
2013-08-28 8:12 ` Gleb Natapov
2013-08-28 8:37 ` Xiao Guangrong
2013-08-28 8:58 ` Gleb Natapov
2013-08-28 9:19 ` Xiao Guangrong
2013-07-30 13:02 ` [PATCH 08/12] KVM: MMU: introduce nulls desc Xiao Guangrong
2013-08-28 8:40 ` Gleb Natapov
2013-08-28 8:54 ` Xiao Guangrong
2013-07-30 13:02 ` [PATCH 09/12] KVM: MMU: introduce pte-list lockless walker Xiao Guangrong
2013-08-28 9:20 ` Gleb Natapov
2013-08-28 9:33 ` Xiao Guangrong
2013-08-28 9:46 ` Gleb Natapov
2013-08-28 10:13 ` Xiao Guangrong
2013-08-28 10:49 ` Gleb Natapov
2013-08-28 12:15 ` Xiao Guangrong
2013-08-28 13:36 ` Gleb Natapov
2013-08-29 6:50 ` Xiao Guangrong
2013-08-29 9:08 ` Gleb Natapov
2013-08-29 9:31 ` Xiao Guangrong
2013-08-29 9:51 ` Gleb Natapov
2013-08-29 11:26 ` Xiao Guangrong
2013-08-30 11:38 ` Gleb Natapov
2013-09-02 7:02 ` Xiao Guangrong
2013-08-29 9:31 ` Gleb Natapov
2013-08-29 11:33 ` Xiao Guangrong
2013-08-29 12:02 ` Xiao Guangrong
2013-08-30 11:44 ` Gleb Natapov
2013-09-02 8:50 ` Xiao Guangrong
2013-07-30 13:02 ` [PATCH 10/12] KVM: MMU: allow locklessly access shadow page table out of vcpu thread Xiao Guangrong
2013-08-07 13:09 ` Takuya Yoshikawa
2013-08-07 13:19 ` Xiao Guangrong
2013-08-29 9:10 ` Gleb Natapov
2013-08-29 9:25 ` Xiao Guangrong
2013-07-30 13:02 ` [PATCH 11/12] KVM: MMU: locklessly write-protect the page Xiao Guangrong
2013-07-30 13:02 ` [PATCH 12/12] KVM: MMU: clean up spte_write_protect Xiao Guangrong
2013-07-30 13:11 ` [RFC PATCH 00/12] KVM: MMU: locklessly wirte-protect Xiao Guangrong
2013-08-03 5:09 ` Takuya Yoshikawa
2013-08-04 14:15 ` Xiao Guangrong
2013-08-29 7:16 ` Gleb Natapov
2013-08-06 13:16 ` Xiao Guangrong
2013-08-08 17:38 ` Paolo Bonzini
2013-08-09 4:51 ` Xiao Guangrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130802145524.GA3501@amt.cnet \
--to=mtosatti@redhat.com \
--cc=avi.kivity@gmail.com \
--cc=gleb@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=xiaoguangrong@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome