mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [guv 00/16] [RFC] percpu: Replace __get_cpu_var uses throughout the kernel
@ 2013-08-23 19:01 Christoph Lameter
  2013-08-23 20:05 ` Tejun Heo
  2013-08-27  4:57 ` Stephen Rothwell
  0 siblings, 2 replies; 6+ messages in thread
From: Christoph Lameter @ 2013-08-23 19:01 UTC (permalink / raw)
  To: Tejun Heo; +Cc: akpm, linux-arch, Steven Rostedt, linux-kernel

__get_cpu_var() is used for multiple purposes in the kernel source. One of them is
address calculation via the form &__get_cpu_va(x). This calculates the address for
the instance of the percpu variable of the current processor based on an offset.

Others usage cases are for storing and retrieving data from the current processors percpu area.
__get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment.

__get_cpu_var() is defined as :


#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))



__get_cpu_var() always only does a address determination. However, store and retrieve operations
can use a segment prefix (or global register on other platforms) to avoid the address calculation.

this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use
optimized assembly code to read and write per cpu variables.

This patch converts __get_cpu_var into either and explicit address calculation using this_cpu_ptr()
or into a use of this_cpu operations that use the offset. Thereby address calcualtions are avoided
and less registers are used when code is generated.

At the end of the patchset all uses of __get_cpu_var have been removed so the macro is removed too.

The patchset includes passes over all arches as well. Once these operations are used throughout then
specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by
f.e. using a global register that may be set to the per cpu base.

Transformations done to __get_cpu_var()


1. Determine the address of the percpu instance of the current processor.

	DEFINE_PER_CPU(int, y);
	int *x = &__get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(&y);

2. Same as #1 but this time an array structure is involved.

	DEFINE_PER_CPU(int, y[20]);
	int *x = __get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(y);


3. Retrieve the content of the current processors instance of a per cpu variable.

	DEFINE_PER_CPU(int, u);
	int x = __get_cpu_var(y)

   Converts to

	int x = __this_cpu_read(y);

4. Retrieve the content of a percpu struct

	DEFINE_PER_CPU(struct mystruct, y);
	struct mystruct x = __get_cpu_var(y);

   Converts to

	memcpy(this_cpu_ptr(&y), x, sizeof(x));


5. Assignment to a per cpu variable

	DEFINE_PER_CPU(int, y)
	__get_cpu_var(y) = x;

   Converts to

	this_cpu_write(y, x);

6. Increment/Decrementi etc of a per cpu variable

	DEFINE_PER_CPU(int, y);
	__get_cpu_var(y)++

   Converts to

	this_cpu_inc(y)


These conversiont throughout the kernel source lead to
some savings in term sof code size.

Before

size arch/x86/boot/bzImage
   text	   data	    bss	    dec	    hex	filename
3996624	      0	      0	3996624	 3cfbd0	arch/x86/boot/bzImage

After

size arch/x86/boot/bzImage
   text	   data	    bss	    dec	    hex	filename
3995840	      0	      0	3995840	 3cf8c0	arch/x86/boot/bzImage




^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-08-27 15:39 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-08-23 19:01 [guv 00/16] [RFC] percpu: Replace __get_cpu_var uses throughout the kernel Christoph Lameter
2013-08-23 20:05 ` Tejun Heo
2013-08-26 15:21   ` Christoph Lameter
2013-08-26 18:18     ` Tejun Heo
2013-08-27  4:57 ` Stephen Rothwell
2013-08-27 15:39   ` Christoph Lameter

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®