From: "Theodore Ts'o" <tytso@mit.edu>
To: "Jörn Engel" <joern@logfs.org>,
"John Stultz" <john.stultz@linaro.org>,
"Stephan Mueller" <smueller@chronox.de>,
LKML <linux-kernel@vger.kernel.org>,
dave.taht@bufferbloat.net,
"Frederic Weisbecker" <fweisbec@gmail.com>,
"Thomas Gleixner" <tglx@linutronix.de>
Subject: Re: [PATCH,RFC] random: make fast_mix() honor its name
Date: Sat, 21 Sep 2013 23:05:53 -0400 [thread overview]
Message-ID: <20130922030553.GA21422@thunk.org> (raw)
In-Reply-To: <20130921214118.GE8606@thunk.org>
The following fast_mix function, with the loop unrolling, is about 70%
slower than your proposed version, but it's still four times faster
than the original byte-based fast_mix function. This is what I'm
considering using as a compromise.
Any comments or objections?
- Ted
static void fast_mix(struct fast_pool *f, __u32 input[4])
{
__u32 w;
int i;
unsigned input_rotate = f->rotate;
#if 0
for (i = 0; i < 4; i++) {
w = rol32(input[i], input_rotate) ^ f->pool[i] ^
f->pool[(i + 3) & 3];
f->pool[i] = (w >> 3) ^ twist_table[w & 7];
input_rotate = (input_rotate + (i ? 7 : 14)) & 31;
}
#else /* loop unrolled for speed */
w = rol32(input[0], input_rotate) ^ f->pool[0] ^ f->pool[3];
f->pool[0] = (w >> 3) ^ twist_table[w & 7];
input_rotate = (input_rotate + 14) & 31;
w = rol32(input[1], input_rotate) ^ f->pool[1] ^ f->pool[0];
f->pool[1] = (w >> 3) ^ twist_table[w & 7];
input_rotate = (input_rotate + 7) & 31;
w = rol32(input[2], input_rotate) ^ f->pool[2] ^ f->pool[1];
f->pool[2] = (w >> 3) ^ twist_table[w & 7];
input_rotate = (input_rotate + 7) & 31;
w = rol32(input[3], input_rotate) ^ f->pool[3] ^ f->pool[2];
f->pool[3] = (w >> 3) ^ twist_table[w & 7];
input_rotate = (input_rotate + 7) & 31;
#endif
f->count += 16;
f->rotate = input_rotate;
}
next prev parent reply other threads:[~2013-09-22 3:06 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-10 11:31 [PATCH] /dev/random: Insufficient of entropy on many architectures Stephan Mueller
2013-09-10 11:46 ` Geert Uytterhoeven
2013-09-10 15:04 ` Theodore Ts'o
2013-09-10 16:54 ` Stephan Mueller
2013-09-10 18:25 ` Theodore Ts'o
2013-09-10 19:15 ` Stephan Mueller
2013-10-10 6:50 ` Pavel Machek
2013-10-14 21:13 ` Theodore Ts'o
2013-09-10 20:48 ` Geert Uytterhoeven
2013-09-10 21:14 ` Theodore Ts'o
2013-09-11 6:49 ` Stephan Mueller
2013-09-12 11:59 ` Geert Uytterhoeven
2013-09-12 12:08 ` Stephan Mueller
2013-09-12 12:15 ` Geert Uytterhoeven
2013-09-12 12:35 ` Stephan Mueller
2013-09-12 12:47 ` Geert Uytterhoeven
2013-09-12 12:57 ` Stephan Mueller
2013-09-12 21:18 ` Jörn Engel
2013-09-13 11:33 ` Thorsten Glaser
2013-09-12 14:25 ` Theodore Ts'o
2013-09-10 19:38 ` John Stultz
2013-09-10 19:44 ` John Stultz
2013-09-10 19:47 ` Stephan Mueller
2013-09-10 20:35 ` John Stultz
2013-09-10 20:38 ` Theodore Ts'o
2013-09-10 20:46 ` John Stultz
2013-09-10 21:10 ` Theodore Ts'o
2013-09-10 22:08 ` John Stultz
2013-09-10 22:33 ` Theodore Ts'o
2013-09-11 0:31 ` John Stultz
2013-09-11 0:50 ` Theodore Ts'o
2013-09-11 1:14 ` John Stultz
2013-09-12 20:46 ` H. Peter Anvin
2013-09-12 21:07 ` Jörn Engel
2013-09-12 23:31 ` Theodore Ts'o
2013-09-12 23:35 ` Jörn Engel
2013-09-13 0:00 ` Jörn Engel
2013-09-16 15:40 ` [PATCH,RFC] random: make fast_mix() honor its name Jörn Engel
2013-09-21 21:25 ` Theodore Ts'o
2013-09-21 21:41 ` Theodore Ts'o
2013-09-22 3:05 ` Theodore Ts'o [this message]
2013-09-22 21:01 ` Jörg-Volker Peetz
2013-09-22 21:27 ` Theodore Ts'o
2013-09-22 20:53 ` Jörn Engel
2013-09-22 23:36 ` Theodore Ts'o
2013-09-23 0:16 ` Jörn Engel
2013-09-23 2:43 ` Theodore Ts'o
2013-09-23 15:02 ` Jörn Engel
2013-09-23 7:39 ` Jörg-Volker Peetz
2013-09-22 20:31 ` Jörn Engel
2013-09-22 20:14 ` Jörn Engel
2013-09-12 21:31 ` [PATCH] /dev/random: Insufficient of entropy on many architectures Jörn Engel
2013-09-13 5:36 ` Stephan Mueller
2013-09-13 11:54 ` Thorsten Glaser
2013-09-13 19:29 ` Theodore Ts'o
2013-09-13 15:26 ` Jörn Engel
2013-09-13 18:59 ` Theodore Ts'o
2013-09-15 11:12 ` Stephan Mueller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130922030553.GA21422@thunk.org \
--to=tytso@mit.edu \
--cc=dave.taht@bufferbloat.net \
--cc=fweisbec@gmail.com \
--cc=joern@logfs.org \
--cc=john.stultz@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=smueller@chronox.de \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome