From: "Lothar Waßmann" <LW@KARO-electronics.de>
To: Xiubo Li <Li.Xiubo@freescale.com>
Cc: <lgirdwood@gmail.com>, <broonie@kernel.org>, <perex@perex.cz>,
<tiwai@suse.de>, <fabio.estevam@freescale.com>, <oskar@scara.com>,
<alsa-devel@alsa-project.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCHv1] ASoC: SGTL5000: Fix kernel failed while getting regulator consumers
Date: Tue, 26 Nov 2013 11:59:33 +0100 [thread overview]
Message-ID: <20131126115933.74840d1a@ipc1.ka-ro> (raw)
In-Reply-To: <1385459713-6778-1-git-send-email-Li.Xiubo@freescale.com>
Hi,
Xiubo Li wrote:
> SGTL5000 codec allows to use the internal LDO instead of VDDD, if the
> internal LDO is used, this caused the following kernel failed while trying
> to get the external VDDD regulator consumer.
>
> Adding sgtl5000_external_vddd_used() to fix it. And this has been tested on
> VF610-TWR board.
>
> sgtl5000 0-000a: Failed to get supply 'VDDD': -19
>
> Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
> ---
>
> sound/soc/codecs/sgtl5000.c | 18 +++++++++++++++---
> 1 file changed, 15 insertions(+), 3 deletions(-)
>
> diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
> index 1f4093f..1a2d35a 100644
> --- a/sound/soc/codecs/sgtl5000.c
> +++ b/sound/soc/codecs/sgtl5000.c
> @@ -1298,6 +1298,20 @@ static int sgtl5000_replace_vddd_with_ldo(struct snd_soc_codec *codec)
> return 0;
> }
>
> +static int sgtl5000_external_vddd_used(struct snd_soc_codec *codec)
> +{
> + struct regulator *consumer;
> + struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
> +
> + consumer = regulator_get(codec->dev, sgtl5000->supplies[VDDD].supply);
> + if (IS_ERR(consumer)) {
> + return 0;
> + }
> + regulator_put(consumer);
> +
> + return 1;
> +}
> +
> static int sgtl5000_enable_regulators(struct snd_soc_codec *codec)
> {
> int reg;
> @@ -1310,9 +1324,7 @@ static int sgtl5000_enable_regulators(struct snd_soc_codec *codec)
> for (i = 0; i < ARRAY_SIZE(sgtl5000->supplies); i++)
> sgtl5000->supplies[i].supply = supply_names[i];
>
> - ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(sgtl5000->supplies),
> - sgtl5000->supplies);
> - if (!ret)
> + if (sgtl5000_external_vddd_used(codec))
> external_vddd = 1;
> else {
> ret = sgtl5000_replace_vddd_with_ldo(codec);
>
You could fix the coding style issue (braces on both branches
of the if clause) here too.
Lothar Waßmann
--
___________________________________________________________
Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996
www.karo-electronics.de | info@karo-electronics.de
___________________________________________________________
next prev parent reply other threads:[~2013-11-26 11:00 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-26 9:55 Xiubo Li
2013-11-26 10:59 ` Lothar Waßmann [this message]
2013-11-27 4:16 ` Li Xiubo
2013-11-26 13:44 ` Mark Brown
2013-11-27 8:13 ` Li Xiubo
2013-11-27 11:27 ` Mark Brown
2013-11-28 3:31 ` Li Xiubo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131126115933.74840d1a@ipc1.ka-ro \
--to=lw@karo-electronics.de \
--cc=Li.Xiubo@freescale.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=fabio.estevam@freescale.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=oskar@scara.com \
--cc=perex@perex.cz \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®