From: Wei Liu <wei.liu2@citrix.com>
To: Zoltan Kiss <zoltan.kiss@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>, <ian.campbell@citrix.com>,
<xen-devel@lists.xenproject.org>, <netdev@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <jonathan.davies@citrix.com>
Subject: Re: [PATCH net-next v2 6/9] xen-netback: Handle guests with too many frags
Date: Mon, 16 Dec 2013 18:09:08 +0000 [thread overview]
Message-ID: <20131216180908.GC25969@zion.uk.xensource.com> (raw)
In-Reply-To: <52AF2602.2000409@citrix.com>
On Mon, Dec 16, 2013 at 04:10:42PM +0000, Zoltan Kiss wrote:
> On 13/12/13 15:43, Wei Liu wrote:
> >On Thu, Dec 12, 2013 at 11:48:14PM +0000, Zoltan Kiss wrote:
> >>Xen network protocol had implicit dependency on MAX_SKB_FRAGS. Netback has to
> >>handle guests sending up to XEN_NETBK_LEGACY_SLOTS_MAX slots. To achieve that:
> >>- create a new skb
> >>- map the leftover slots to its frags (no linear buffer here!)
> >>- chain it to the previous through skb_shinfo(skb)->frag_list
> >>- map them
> >>- copy the whole stuff into a brand new skb and send it to the stack
> >>- unmap the 2 old skb's pages
> >>
> >
> >Do you see performance regression with this approach?
> Well, it was pretty hard to reproduce that behaviour even with NFS.
> I don't think it happens often enough that it causes a noticable
> performance regression. Anyway, it would be just as slow as the
> current grant copy with coalescing, maybe a bit slower due to the
> unmapping. But at least we use a core network function to do the
> coalescing.
> Or, if you mean the generic performance, if this problem doesn't
> appear, then no, I don't see performance regression.
>
OK, thanks for comfirming.
> >>Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
> >>
> >>---
> >> drivers/net/xen-netback/netback.c | 99 +++++++++++++++++++++++++++++++++++--
> >> 1 file changed, 94 insertions(+), 5 deletions(-)
> >>
> >>diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
> >>index e26cdda..f6ed1c8 100644
> >>--- a/drivers/net/xen-netback/netback.c
> >>+++ b/drivers/net/xen-netback/netback.c
> >>@@ -906,11 +906,15 @@ static struct gnttab_map_grant_ref *xenvif_get_requests(struct xenvif *vif,
> >> u16 pending_idx = *((u16 *)skb->data);
> >> int start;
> >> pending_ring_idx_t index;
> >>- unsigned int nr_slots;
> >>+ unsigned int nr_slots, frag_overflow = 0;
> >>
> >> /* At this point shinfo->nr_frags is in fact the number of
> >> * slots, which can be as large as XEN_NETBK_LEGACY_SLOTS_MAX.
> >> */
> >>+ if (shinfo->nr_frags > MAX_SKB_FRAGS) {
> >>+ frag_overflow = shinfo->nr_frags - MAX_SKB_FRAGS;
> >>+ shinfo->nr_frags = MAX_SKB_FRAGS;
> >>+ }
> >> nr_slots = shinfo->nr_frags;
> >>
> >
> >It is also probably better to check whether shinfo->nr_frags is too
> >large which makes frag_overflow > MAX_SKB_FRAGS. I know skb should be
> >already be valid at this point but it wouldn't hurt to be more careful.
> Ok, I've added this:
> /* At this point shinfo->nr_frags is in fact the number of
> * slots, which can be as large as XEN_NETBK_LEGACY_SLOTS_MAX.
> */
> + if (shinfo->nr_frags > MAX_SKB_FRAGS) {
> + if (shinfo->nr_frags > XEN_NETBK_LEGACY_SLOTS_MAX) return NULL;
> + frag_overflow = shinfo->nr_frags - MAX_SKB_FRAGS;
>
What I suggested is
BUG_ON(frag_overflow > MAX_SKB_FRAGS)
Wei.
next prev parent reply other threads:[~2013-12-16 18:09 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-12 23:48 [PATCH net-next v2 0/9] xen-netback: TX grant mapping with SKBTX_DEV_ZEROCOPY instead of copy Zoltan Kiss
2013-12-12 23:48 ` [PATCH net-next v2 1/9] xen-netback: Introduce TX grant map definitions Zoltan Kiss
2013-12-13 15:31 ` Wei Liu
2013-12-13 18:22 ` Zoltan Kiss
2013-12-13 19:14 ` Wei Liu
2013-12-16 15:21 ` Zoltan Kiss
2013-12-16 17:50 ` Wei Liu
2014-01-07 14:50 ` Zoltan Kiss
2013-12-12 23:48 ` [PATCH net-next v2 2/9] xen-netback: Change TX path from grant copy to mapping Zoltan Kiss
2013-12-13 15:36 ` Wei Liu
2013-12-16 15:38 ` Zoltan Kiss
2013-12-16 18:21 ` Wei Liu
2013-12-16 18:57 ` Zoltan Kiss
2013-12-16 19:06 ` Wei Liu
2013-12-17 21:49 ` [Xen-devel] " Konrad Rzeszutek Wilk
2013-12-30 17:58 ` Zoltan Kiss
2013-12-12 23:48 ` [PATCH net-next v2 3/9] xen-netback: Remove old TX grant copy definitons and fix indentations Zoltan Kiss
2013-12-12 23:48 ` [PATCH net-next v2 4/9] xen-netback: Change RX path for mapped SKB fragments Zoltan Kiss
2013-12-12 23:48 ` [PATCH net-next v2 5/9] xen-netback: Add stat counters for zerocopy Zoltan Kiss
2013-12-12 23:48 ` [PATCH net-next v2 6/9] xen-netback: Handle guests with too many frags Zoltan Kiss
2013-12-13 15:43 ` Wei Liu
2013-12-16 16:10 ` Zoltan Kiss
2013-12-16 18:09 ` Wei Liu [this message]
2014-01-07 15:23 ` Zoltan Kiss
2013-12-12 23:48 ` [PATCH net-next v2 7/9] xen-netback: Add stat counters for frag_list skbs Zoltan Kiss
2013-12-12 23:48 ` [PATCH net-next v2 8/9] xen-netback: Timeout packets in RX path Zoltan Kiss
2013-12-13 15:44 ` Wei Liu
2013-12-16 17:16 ` Zoltan Kiss
2013-12-16 19:03 ` Wei Liu
2013-12-12 23:48 ` [PATCH net-next v2 9/9] xen-netback: Aggregate TX unmap operations Zoltan Kiss
2013-12-13 15:44 ` Wei Liu
2013-12-16 16:30 ` Zoltan Kiss
2013-12-16 6:32 ` [Xen-devel] [PATCH net-next v2 0/9] xen-netback: TX grant mapping with SKBTX_DEV_ZEROCOPY instead of copy annie li
2013-12-16 16:13 ` Zoltan Kiss
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131216180908.GC25969@zion.uk.xensource.com \
--to=wei.liu2@citrix.com \
--cc=ian.campbell@citrix.com \
--cc=jonathan.davies@citrix.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=xen-devel@lists.xenproject.org \
--cc=zoltan.kiss@citrix.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome