From: Bjorn Helgaas <bhelgaas@google.com>
To: linux-pci@vger.kernel.org, Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>, Yinghai Lu <yinghai@kernel.org>,
Guo Chao <yan@linux.vnet.ibm.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v7 11/15] agp/intel: Use CPU physical address, not bus address, for ioremap()
Date: Mon, 06 Jan 2014 17:56:31 -0700 [thread overview]
Message-ID: <20140107005630.10786.35580.stgit@bhelgaas-glaptop.roam.corp.google.com> (raw)
In-Reply-To: <20140107005003.10786.85164.stgit@bhelgaas-glaptop.roam.corp.google.com>
In i810_setup(), i830_setup(), and i9xx_setup(), we use the result of
pci_bus_address() as an argument to ioremap() and to compute gtt_phys_addr.
These should use pci_resource_start() instead because we want the CPU
physical address, not the bus address.
If there were an AGP device behind a host bridge that translated addresses,
e.g., a PNP0A08 device with _TRA != 0, this would fix a bug. I'm not aware
of any of those, but they are possible.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
drivers/char/agp/intel-gtt.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index dd8b66a617dc..ad5da1ffcbe9 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -172,7 +172,7 @@ static void i8xx_destroy_pages(struct page *page)
#define I810_GTT_ORDER 4
static int i810_setup(void)
{
- u32 reg_addr;
+ phys_addr_t reg_addr;
char *gtt_table;
/* i81x does not preallocate the gtt. It's always 64kb in size. */
@@ -181,7 +181,7 @@ static int i810_setup(void)
return -ENOMEM;
intel_private.i81x_gtt_table = gtt_table;
- reg_addr = pci_bus_address(intel_private.pcidev, I810_MMADR_BAR);
+ reg_addr = pci_resource_start(intel_private.pcidev, I810_MMADR_BAR);
intel_private.registers = ioremap(reg_addr, KB(64));
if (!intel_private.registers)
@@ -782,9 +782,9 @@ EXPORT_SYMBOL(intel_enable_gtt);
static int i830_setup(void)
{
- u32 reg_addr;
+ phys_addr_t reg_addr;
- reg_addr = pci_bus_address(intel_private.pcidev, I810_MMADR_BAR);
+ reg_addr = pci_resource_start(intel_private.pcidev, I810_MMADR_BAR);
intel_private.registers = ioremap(reg_addr, KB(64));
if (!intel_private.registers)
@@ -1102,10 +1102,10 @@ static void i965_write_entry(dma_addr_t addr,
static int i9xx_setup(void)
{
- u32 reg_addr;
+ phys_addr_t reg_addr;
int size = KB(512);
- reg_addr = pci_bus_address(intel_private.pcidev, I915_MMADR_BAR);
+ reg_addr = pci_resource_start(intel_private.pcidev, I915_MMADR_BAR);
intel_private.registers = ioremap(reg_addr, size);
if (!intel_private.registers)
@@ -1114,7 +1114,7 @@ static int i9xx_setup(void)
switch (INTEL_GTT_GEN) {
case 3:
intel_private.gtt_phys_addr =
- pci_bus_address(intel_private.pcidev, I915_PTE_BAR);
+ pci_resource_start(intel_private.pcidev, I915_PTE_BAR);
break;
case 5:
intel_private.gtt_phys_addr = reg_addr + MB(2);
next prev parent reply other threads:[~2014-01-07 0:56 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-07 0:55 [PATCH v7 00/15] PCI: Allocate 64-bit BARs above 4G when possible Bjorn Helgaas
2014-01-07 0:55 ` [PATCH v7 01/15] PCI: Change pci_bus_region addresses to dma_addr_t Bjorn Helgaas
2014-01-07 0:55 ` [PATCH v7 02/15] PCI: Convert pcibios_resource_to_bus() to take a pci_bus, not a pci_dev Bjorn Helgaas
2014-01-07 0:55 ` [PATCH v7 03/15] PCI: Add pci_bus_address() to get bus address of a BAR Bjorn Helgaas
2014-01-07 0:55 ` [PATCH v7 04/15] agp: Support 64-bit APBASE Bjorn Helgaas
2014-01-07 0:55 ` [PATCH v7 05/15] agp: Use pci_resource_start() to get CPU physical address for BAR Bjorn Helgaas
2014-01-07 0:55 ` [PATCH v7 06/15] drm/i915: Rename gtt_bus_addr to gtt_phys_addr Bjorn Helgaas
2014-01-07 0:56 ` [PATCH v7 07/15] agp/intel: " Bjorn Helgaas
2014-01-07 0:56 ` [PATCH v7 08/15] agp/intel: Support 64-bit GMADR Bjorn Helgaas
2014-01-07 0:56 ` [PATCH v7 09/15] agp/intel: Use pci_bus_address() to get MMADR bus address Bjorn Helgaas
2014-01-07 0:56 ` [PATCH v7 10/15] agp/intel: Use pci_bus_address() to get GTTADR " Bjorn Helgaas
2014-01-07 0:56 ` Bjorn Helgaas [this message]
2014-01-07 0:56 ` [PATCH v7 12/15] agp/ati: Use PCI_COMMAND instead of hard-coded 4 Bjorn Helgaas
2014-01-07 0:56 ` [PATCH v7 13/15] PCI: Split out bridge window override of minimum allocation address Bjorn Helgaas
2014-01-07 0:56 ` [PATCH v7 14/15] PCI: Enforce bus address limits in resource allocation Bjorn Helgaas
2014-01-07 0:56 ` [PATCH v7 15/15] PCI: Allocate 64-bit BARs above 4G when possible Bjorn Helgaas
2014-01-07 10:46 ` [PATCH v7 00/15] " Daniel Vetter
2014-01-07 18:46 ` Bjorn Helgaas
2014-01-10 21:34 ` Bjorn Helgaas
2014-01-15 5:14 ` Dave Airlie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140107005630.10786.35580.stgit@bhelgaas-glaptop.roam.corp.google.com \
--to=bhelgaas@google.com \
--cc=airlied@linux.ie \
--cc=daniel.vetter@ffwll.ch \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=yan@linux.vnet.ibm.com \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®