From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
Cc: nicolas.ferre@atmel.com, b.brezillon@overkiz.com, arnd@arndb.de,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 09/12] at91: dt: sam9261: Pinmux DT entries for the SMC/EBI interface
Date: Wed, 15 Jan 2014 12:25:28 +0100 [thread overview]
Message-ID: <20140115112528.GR14627@ns203013.ovh.net> (raw)
In-Reply-To: <1389270709-32662-10-git-send-email-jjhiblot@traphandler.com>
On 13:31 Thu 09 Jan , Jean-Jacques Hiblot wrote:
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
> ---
> arch/arm/boot/dts/at91sam9261.dtsi | 54 ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 54 insertions(+)
>
> diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
> index cd219b9..695d5d2 100644
> --- a/arch/arm/boot/dts/at91sam9261.dtsi
> +++ b/arch/arm/boot/dts/at91sam9261.dtsi
> @@ -317,6 +317,60 @@
> >;
> };
> };
> + smc {
> + pinctrl_smc_nwait: smc_nwait-0 {
> + atmel,pins = <AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> + };
> + pinctrl_smc_a23_a25: smc_a23_a25-0 {
use better name this is not clear
> + atmel,pins =
> + <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE
> + AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE
> + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> + };
> + pinctrl_smc_d16_d31: smc_d16_d31-0 {
> + atmel,pins =
> + <AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOC 25 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE
> + AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> + };
> + pinctrl_smc_ncs4: smc_ncs4-0 {
> + atmel,pins = <AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> + };
> + pinctrl_smc_ncs5: smc_ncs5-0 {
> + atmel,pins = <AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> + };
> + pinctrl_smc_nandoe: smc_nandoe-0 {
> + atmel,pins = <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> + };
> + pinctrl_smc_ncs6: smc_ncs6-0 {
> + atmel,pins = <AT91_PIOC 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> + pinctrl_smc_nandwe: smc_nandwe-0 {
> + atmel,pins = <AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> + };
> + pinctrl_smc_ncs7: smc_ncs7-0 {
> + atmel,pins = <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> + pinctrl_smc_cfce1: smc_cfce1-0 {
> + atmel,pins = <AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> + };
> + pinctrl_smc_cfce2: smc_cfce2-0 {
> + atmel,pins = <AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> + };
> + };
> pioA: gpio@fffff400 {
> compatible = "atmel,at91rm9200-gpio";
> reg = <0xfffff400 0x200>;
> --
> 1.8.5.2
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2014-01-15 12:03 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-09 12:31 [PATCH v2 00/12] Device Tree support for the at91sam9261ek Jean-Jacques Hiblot
2014-01-09 12:31 ` [PATCH v2 01/12] at91: dt: Add at91sam9261 dt SoC support Jean-Jacques Hiblot
2014-01-14 17:01 ` Nicolas Ferre
2014-01-15 10:08 ` Jean-Jacques Hiblot
2014-01-15 10:14 ` Nicolas Ferre
2014-01-15 11:31 ` Jean-Christophe PLAGNIOL-VILLARD
2014-01-09 12:31 ` [PATCH v2 02/12] at91: dt: sam9261: Basic Device Tree support for the at91sam9261ek Jean-Jacques Hiblot
2014-01-14 17:06 ` Nicolas Ferre
2014-01-09 12:31 ` [PATCH v2 03/12] at91: dt: sam9261: Added support for the lcd display Jean-Jacques Hiblot
2014-01-09 17:07 ` boris brezillon
2014-01-15 11:27 ` Jean-Christophe PLAGNIOL-VILLARD
2014-01-14 17:09 ` Nicolas Ferre
2014-01-09 12:31 ` [PATCH v2 04/12] at91: smc: export sam9_smc_cs_read and sam9_smc_cs_configure Jean-Jacques Hiblot
2014-01-09 12:31 ` [PATCH v2 05/12] at91: smc: Increased the size of tdf_cycles in struct sam9_smc_config Jean-Jacques Hiblot
2014-01-09 12:31 ` [PATCH v2 06/12] at91: smc: Adds helper functions to validate and clip the smc timings Jean-Jacques Hiblot
2014-01-15 9:44 ` Nicolas Ferre
2014-01-15 9:54 ` Jean-Jacques Hiblot
2014-01-15 10:18 ` Nicolas Ferre
2014-01-09 12:31 ` [PATCH v2 07/12] at91: dt: smc: Added smc bus driver Jean-Jacques Hiblot
2014-01-09 16:59 ` boris brezillon
2014-01-09 21:04 ` Jean-Jacques Hiblot
2014-01-10 11:01 ` Jean-Jacques Hiblot
2014-01-10 11:08 ` Jean-Jacques Hiblot
2014-01-11 8:06 ` boris brezillon
2014-01-14 14:20 ` Jean-Jacques Hiblot
2014-01-14 15:01 ` Nicolas Ferre
2014-02-07 8:42 ` Jean-Christophe PLAGNIOL-VILLARD
2014-01-09 12:31 ` [PATCH v2 08/12] at91: sam9261: Add a clock definition for the smc Jean-Jacques Hiblot
2014-01-09 12:31 ` [PATCH v2 09/12] at91: dt: sam9261: Pinmux DT entries for the SMC/EBI interface Jean-Jacques Hiblot
2014-01-15 11:25 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2014-01-09 12:31 ` [PATCH v2 10/12] at91: dt: sam9261: Add an entry in the DT for the SMC/EBI bus driver Jean-Jacques Hiblot
2014-01-09 12:31 ` [PATCH v2 11/12] at91: dt: sam9261: moved the NAND under the smc node Jean-Jacques Hiblot
2014-01-09 12:31 ` [PATCH v2 12/12] at91: dt: sam9261: Added DM9000 in the device tree Jean-Jacques Hiblot
2014-01-15 11:23 ` Jean-Christophe PLAGNIOL-VILLARD
2014-01-14 16:54 ` [PATCH v2 00/12] Device Tree support for the at91sam9261ek Nicolas Ferre
2014-01-15 8:34 ` Jean-Jacques Hiblot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140115112528.GR14627@ns203013.ovh.net \
--to=plagnioj@jcrosoft.com \
--cc=arnd@arndb.de \
--cc=b.brezillon@overkiz.com \
--cc=jjhiblot@traphandler.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®