* [Ftrace][Bug] Failed on adding breakpoints, when used with kgdboc
@ 2014-02-07 14:08 yogesh tillu
2014-02-07 14:34 ` Steven Rostedt
0 siblings, 1 reply; 4+ messages in thread
From: yogesh tillu @ 2014-02-07 14:08 UTC (permalink / raw)
To: linux-kernel; +Cc: Prasun Kapoor, rostedt
Issue: [On x86 64 bit setup] If we enable CONFIG_FTRACE_STARTUP_TEST,
and set software breakpoint(from kgdboc) result into below mentioned
oops and non working of kgdb software breakpoint.
[ 347.686031] ------------[ cut here ]------------
[ 348.728729] WARNING: at kernel/trace/ftrace.c:1688 ftrace_bug+0x209/0x250()
[ 348.787984] Modules linked in:
[ 348.894035] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W
3.10.26.x86-generic-64-rt22 #17
[ 348.955562] Hardware name: Intel Corporation
BIOS S1200BT.86B.02.00.0035.030220120927 03/02/2012
[ 349.021339] ffff88013acbbd10 ffff88013acbbd18 ffffffff8180b2b4
ffff88013acbbd58
[ 349.021353] ffffffff81041fc0 ffffffff819e376d ffffffff81816360
ffffffff819cc2ee
[ 349.021367] 0000000000007240 ffffffff81db3880 ffffffff8181a050
ffff88013acbbd68
[ 349.200624] Call Trace:
[ 349.254776] [<ffffffff8180b2b4>] dump_stack+0x19/0x1b
[ 349.254789] [<ffffffff81041fc0>] warn_slowpath_common+0x70/0xa0
[ 349.254800] [<ffffffff81816360>] ? __do_page_fault+0x4e0/0x4e0
[ 349.254816] [<ffffffff8181a050>] ? __fentry__+0x10/0x10
[ 349.254828] [<ffffffff8104200a>] warn_slowpath_null+0x1a/0x20
[ 349.254839] [<ffffffff810e19e9>] ftrace_bug+0x209/0x250
[ 349.254854] [<ffffffff8102c99c>] ftrace_replace_code+0x2bc/0x460
[ 349.254882] [<ffffffff810e244a>] ftrace_modify_all_code+0x7a/0xb0
[ 349.254896] [<ffffffff8102cb50>] arch_ftrace_update_code+0x10/0x20
[ 349.254908] [<ffffffff810e24e2>] ftrace_run_update_code+0x22/0x80
[ 349.254922] [<ffffffff810e2579>] ftrace_startup_enable+0x39/0x50
[ 349.254934] [<ffffffff810e2ac0>] ftrace_startup+0xc0/0x260
[ 349.254952] [<ffffffff810e2c8d>] register_ftrace_function+0x2d/0x50
[ 349.254964] [<ffffffff81c1349f>] ? event_trace_self_tests+0x2e7/0x2e7
[ 349.254976] [<ffffffff81c134bd>] event_trace_self_tests_init+0x1e/0x69
[ 349.254988] [<ffffffff81000362>] do_one_initcall+0x102/0x130
[ 349.255010] [<ffffffff81bf6018>] kernel_init_freeable+0x18b/0x225
[ 349.255021] [<ffffffff81bf5866>] ? do_early_param+0x87/0x87
[ 349.255032] [<ffffffff817f76a0>] ? rest_init+0x90/0x90
[ 349.255048] [<ffffffff817f76ae>] kernel_init+0xe/0xf0
[ 349.255060] [<ffffffff8181a3d2>] ret_from_fork+0x72/0xa0
[ 349.255078] [<ffffffff817f76a0>] ? rest_init+0x90/0x90
[ 349.255107] ---[ end trace 0000000000000002 ]---
[ 350.585736] ftrace failed to modify [<ffffffff81816360>]
do_page_fault+0x0/0x10
[ 350.696684] actual: cc:1f:44:00:00
[ 351.059427] Failed on adding breakpoints (29248):
Setup Details
a) System details
X86 64 bit
kernel version: 3.10.26
b) Configuration
FTRACE & KGDB is enabled
- using kgdb over console ( KGDBOC )
c) Steps to reproduce
Boot kernel, it will wait for kgdboc to connect
start gdb, connect to target and set breakpoint with break command,
and continue.
Kernel will boot with above mentions oops, resulting gdb to wait
forever for breakpoint.
d) Observation: If we disable CONFIG_FTRACE_STARTUP_TEST,
breakpoint(kgdboc) is working fine.
Could you please let me know if anyone came accross this issue ?
--
Thanks,
Yogesh
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Ftrace][Bug] Failed on adding breakpoints, when used with kgdboc
2014-02-07 14:08 [Ftrace][Bug] Failed on adding breakpoints, when used with kgdboc yogesh tillu
@ 2014-02-07 14:34 ` Steven Rostedt
2014-02-10 17:29 ` yogesh tillu
0 siblings, 1 reply; 4+ messages in thread
From: Steven Rostedt @ 2014-02-07 14:34 UTC (permalink / raw)
To: yogesh tillu; +Cc: linux-kernel, Prasun Kapoor
On Fri, 7 Feb 2014 19:38:35 +0530
yogesh tillu <tillu.yogesh@gmail.com> wrote:
> Issue: [On x86 64 bit setup] If we enable CONFIG_FTRACE_STARTUP_TEST,
> and set software breakpoint(from kgdboc) result into below mentioned
> oops and non working of kgdb software breakpoint.
Patient: Doctor, it hurts me when I do this.
Doctor: Then don't do that.
>
> [ 347.686031] ------------[ cut here ]------------
> [ 348.728729] WARNING: at kernel/trace/ftrace.c:1688 ftrace_bug+0x209/0x250()
> [ 348.787984] Modules linked in:
> [ 348.894035] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W
> 3.10.26.x86-generic-64-rt22 #17
> [ 348.955562] Hardware name: Intel Corporation
> BIOS S1200BT.86B.02.00.0035.030220120927 03/02/2012
> [ 349.021339] ffff88013acbbd10 ffff88013acbbd18 ffffffff8180b2b4
> ffff88013acbbd58
> [ 349.021353] ffffffff81041fc0 ffffffff819e376d ffffffff81816360
> ffffffff819cc2ee
> [ 349.021367] 0000000000007240 ffffffff81db3880 ffffffff8181a050
> ffff88013acbbd68
> [ 349.200624] Call Trace:
> [ 349.254776] [<ffffffff8180b2b4>] dump_stack+0x19/0x1b
> [ 349.254789] [<ffffffff81041fc0>] warn_slowpath_common+0x70/0xa0
> [ 349.254800] [<ffffffff81816360>] ? __do_page_fault+0x4e0/0x4e0
> [ 349.254816] [<ffffffff8181a050>] ? __fentry__+0x10/0x10
> [ 349.254828] [<ffffffff8104200a>] warn_slowpath_null+0x1a/0x20
> [ 349.254839] [<ffffffff810e19e9>] ftrace_bug+0x209/0x250
> [ 349.254854] [<ffffffff8102c99c>] ftrace_replace_code+0x2bc/0x460
> [ 349.254882] [<ffffffff810e244a>] ftrace_modify_all_code+0x7a/0xb0
> [ 349.254896] [<ffffffff8102cb50>] arch_ftrace_update_code+0x10/0x20
> [ 349.254908] [<ffffffff810e24e2>] ftrace_run_update_code+0x22/0x80
> [ 349.254922] [<ffffffff810e2579>] ftrace_startup_enable+0x39/0x50
> [ 349.254934] [<ffffffff810e2ac0>] ftrace_startup+0xc0/0x260
> [ 349.254952] [<ffffffff810e2c8d>] register_ftrace_function+0x2d/0x50
> [ 349.254964] [<ffffffff81c1349f>] ? event_trace_self_tests+0x2e7/0x2e7
> [ 349.254976] [<ffffffff81c134bd>] event_trace_self_tests_init+0x1e/0x69
> [ 349.254988] [<ffffffff81000362>] do_one_initcall+0x102/0x130
> [ 349.255010] [<ffffffff81bf6018>] kernel_init_freeable+0x18b/0x225
> [ 349.255021] [<ffffffff81bf5866>] ? do_early_param+0x87/0x87
> [ 349.255032] [<ffffffff817f76a0>] ? rest_init+0x90/0x90
> [ 349.255048] [<ffffffff817f76ae>] kernel_init+0xe/0xf0
> [ 349.255060] [<ffffffff8181a3d2>] ret_from_fork+0x72/0xa0
> [ 349.255078] [<ffffffff817f76a0>] ? rest_init+0x90/0x90
> [ 349.255107] ---[ end trace 0000000000000002 ]---
> [ 350.585736] ftrace failed to modify [<ffffffff81816360>]
> do_page_fault+0x0/0x10
> [ 350.696684] actual: cc:1f:44:00:00
> [ 351.059427] Failed on adding breakpoints (29248):
Ftrace is very paranoid about making sure everything goes correctly,
because it is modifying kernel text. It checks that what it is
modifying is what it expects to be there before it modifies it.
The above states that it failed when modifying the __fentry__ location
in do_page_fault. It also shows us what it found:
actual: cc:1f:44:00:00
What it expected to find was: 0f:1f:44:00:00
Noticed that a "cc" was in place of the "0f". I also know that on
x86_64, that "cc" is the machine op code of a breakpoint.
Something tells me that on boot up, kgdb will add a breakpoint to
do_page_fault. If it does that on boot up, and you have the ftrace
start up tests enabled, it will cause ftrace to fail.
>
>
> Setup Details
>
> a) System details
> X86 64 bit
> kernel version: 3.10.26
>
> b) Configuration
> FTRACE & KGDB is enabled
> - using kgdb over console ( KGDBOC )
>
> c) Steps to reproduce
> Boot kernel, it will wait for kgdboc to connect
> start gdb, connect to target and set breakpoint with break command,
> and continue.
> Kernel will boot with above mentions oops, resulting gdb to wait
> forever for breakpoint.
>
> d) Observation: If we disable CONFIG_FTRACE_STARTUP_TEST,
> breakpoint(kgdboc) is working fine.
That's exactly what I would expect.
>
> Could you please let me know if anyone came accross this issue ?
>
Nope, you are the first I heard of this, but it makes perfect sense.
Perhaps the solution should be something like this (totally untested):
diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index a260cde..eebf370 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -20,6 +20,7 @@
#include <linux/vt_kern.h>
#include <linux/input.h>
#include <linux/module.h>
+#include <linux/ftrace.h>
#define MAX_CONFIG_LEN 40
@@ -139,6 +140,9 @@ static int kgdboc_option_setup(char *opt)
}
strcpy(config, opt);
+ /* kgdb causes ftrace self tests to fail (false negatives) */
+ disable_ftrace_selftest();
+
return 0;
}
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index f4233b1..54ff26c 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -19,6 +19,12 @@
#include <asm/ftrace.h>
+#if defined(CONFIG_FUNCTION_TRACER) && defined(CONFIG_FTRACE_STARTUP_TEST)
+extern void disable_ftrace_selftest(void);
+#else
+static inline void disable_ftrace_selftest(void) { }
+#endif
+
/*
* If the arch supports passing the variable contents of
* function_trace_op as the third parameter back from the
diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c
index a7329b7..063561a 100644
--- a/kernel/trace/trace_selftest.c
+++ b/kernel/trace/trace_selftest.c
@@ -635,6 +635,13 @@ out:
return ret;
}
+static bool ftrace_selftest_disabled;
+
+void disable_ftrace_selftest(void)
+{
+ ftrace_selftest_disabled = true;
+}
+
/*
* Simple verification test of ftrace function tracer.
* Enable ftrace, sleep 1/10 second, and then read the trace
@@ -654,6 +661,11 @@ trace_selftest_startup_function(struct tracer *trace, struct trace_array *tr)
}
#endif
+ if (ftrace_selftest_disabled) {
+ printk(KERN_CONT " ... DISABLED: force PASS ... ");
+ return 0;
+ }
+
/* make sure msleep has been recorded */
msleep(1);
@@ -748,6 +760,11 @@ trace_selftest_startup_function_graph(struct tracer *trace,
}
#endif
+ if (ftrace_selftest_disabled) {
+ printk(KERN_CONT " ... DISABLED: force PASS ... ");
+ return 0;
+ }
+
/*
* Simulate the init() callback but we attach a watchdog callback
* to detect and recover from possible hangs
-- Steve
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Ftrace][Bug] Failed on adding breakpoints, when used with kgdboc
2014-02-07 14:34 ` Steven Rostedt
@ 2014-02-10 17:29 ` yogesh tillu
2014-02-10 18:03 ` Steven Rostedt
0 siblings, 1 reply; 4+ messages in thread
From: yogesh tillu @ 2014-02-10 17:29 UTC (permalink / raw)
To: Steven Rostedt; +Cc: linux-kernel, Prasun Kapoor
Hi Steve,
Thanks for the reply.
Can we follow the approach of using api ftrace_set_notrace_ip (like
ftrace_set_filter_ip ), and register ip for the notrace hash list from
kgdb x86 arch code at the time of adding/removing breakpoint.
On Fri, Feb 7, 2014 at 8:04 PM, Steven Rostedt <rostedt@goodmis.org> wrote:
> On Fri, 7 Feb 2014 19:38:35 +0530
> yogesh tillu <tillu.yogesh@gmail.com> wrote:
>
>> Issue: [On x86 64 bit setup] If we enable CONFIG_FTRACE_STARTUP_TEST,
>> and set software breakpoint(from kgdboc) result into below mentioned
>> oops and non working of kgdb software breakpoint.
>
> Patient: Doctor, it hurts me when I do this.
>
> Doctor: Then don't do that.
>
>>
>> [ 347.686031] ------------[ cut here ]------------
>> [ 348.728729] WARNING: at kernel/trace/ftrace.c:1688 ftrace_bug+0x209/0x250()
>> [ 348.787984] Modules linked in:
>> [ 348.894035] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W
>> 3.10.26.x86-generic-64-rt22 #17
>> [ 348.955562] Hardware name: Intel Corporation
>> BIOS S1200BT.86B.02.00.0035.030220120927 03/02/2012
>> [ 349.021339] ffff88013acbbd10 ffff88013acbbd18 ffffffff8180b2b4
>> ffff88013acbbd58
>> [ 349.021353] ffffffff81041fc0 ffffffff819e376d ffffffff81816360
>> ffffffff819cc2ee
>> [ 349.021367] 0000000000007240 ffffffff81db3880 ffffffff8181a050
>> ffff88013acbbd68
>> [ 349.200624] Call Trace:
>> [ 349.254776] [<ffffffff8180b2b4>] dump_stack+0x19/0x1b
>> [ 349.254789] [<ffffffff81041fc0>] warn_slowpath_common+0x70/0xa0
>> [ 349.254800] [<ffffffff81816360>] ? __do_page_fault+0x4e0/0x4e0
>> [ 349.254816] [<ffffffff8181a050>] ? __fentry__+0x10/0x10
>> [ 349.254828] [<ffffffff8104200a>] warn_slowpath_null+0x1a/0x20
>> [ 349.254839] [<ffffffff810e19e9>] ftrace_bug+0x209/0x250
>> [ 349.254854] [<ffffffff8102c99c>] ftrace_replace_code+0x2bc/0x460
>> [ 349.254882] [<ffffffff810e244a>] ftrace_modify_all_code+0x7a/0xb0
>> [ 349.254896] [<ffffffff8102cb50>] arch_ftrace_update_code+0x10/0x20
>> [ 349.254908] [<ffffffff810e24e2>] ftrace_run_update_code+0x22/0x80
>> [ 349.254922] [<ffffffff810e2579>] ftrace_startup_enable+0x39/0x50
>> [ 349.254934] [<ffffffff810e2ac0>] ftrace_startup+0xc0/0x260
>> [ 349.254952] [<ffffffff810e2c8d>] register_ftrace_function+0x2d/0x50
>> [ 349.254964] [<ffffffff81c1349f>] ? event_trace_self_tests+0x2e7/0x2e7
>> [ 349.254976] [<ffffffff81c134bd>] event_trace_self_tests_init+0x1e/0x69
>> [ 349.254988] [<ffffffff81000362>] do_one_initcall+0x102/0x130
>> [ 349.255010] [<ffffffff81bf6018>] kernel_init_freeable+0x18b/0x225
>> [ 349.255021] [<ffffffff81bf5866>] ? do_early_param+0x87/0x87
>> [ 349.255032] [<ffffffff817f76a0>] ? rest_init+0x90/0x90
>> [ 349.255048] [<ffffffff817f76ae>] kernel_init+0xe/0xf0
>> [ 349.255060] [<ffffffff8181a3d2>] ret_from_fork+0x72/0xa0
>> [ 349.255078] [<ffffffff817f76a0>] ? rest_init+0x90/0x90
>> [ 349.255107] ---[ end trace 0000000000000002 ]---
>> [ 350.585736] ftrace failed to modify [<ffffffff81816360>]
>> do_page_fault+0x0/0x10
>> [ 350.696684] actual: cc:1f:44:00:00
>> [ 351.059427] Failed on adding breakpoints (29248):
>
> Ftrace is very paranoid about making sure everything goes correctly,
> because it is modifying kernel text. It checks that what it is
> modifying is what it expects to be there before it modifies it.
>
> The above states that it failed when modifying the __fentry__ location
> in do_page_fault. It also shows us what it found:
>
> actual: cc:1f:44:00:00
>
> What it expected to find was: 0f:1f:44:00:00
>
> Noticed that a "cc" was in place of the "0f". I also know that on
> x86_64, that "cc" is the machine op code of a breakpoint.
>
> Something tells me that on boot up, kgdb will add a breakpoint to
> do_page_fault. If it does that on boot up, and you have the ftrace
> start up tests enabled, it will cause ftrace to fail.
>
>>
>>
>> Setup Details
>>
>> a) System details
>> X86 64 bit
>> kernel version: 3.10.26
>>
>> b) Configuration
>> FTRACE & KGDB is enabled
>> - using kgdb over console ( KGDBOC )
>>
>> c) Steps to reproduce
>> Boot kernel, it will wait for kgdboc to connect
>> start gdb, connect to target and set breakpoint with break command,
>> and continue.
>> Kernel will boot with above mentions oops, resulting gdb to wait
>> forever for breakpoint.
>>
>> d) Observation: If we disable CONFIG_FTRACE_STARTUP_TEST,
>> breakpoint(kgdboc) is working fine.
>
> That's exactly what I would expect.
>
>>
>> Could you please let me know if anyone came accross this issue ?
>>
>
> Nope, you are the first I heard of this, but it makes perfect sense.
> Perhaps the solution should be something like this (totally untested):
>
> diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
> index a260cde..eebf370 100644
> --- a/drivers/tty/serial/kgdboc.c
> +++ b/drivers/tty/serial/kgdboc.c
> @@ -20,6 +20,7 @@
> #include <linux/vt_kern.h>
> #include <linux/input.h>
> #include <linux/module.h>
> +#include <linux/ftrace.h>
>
> #define MAX_CONFIG_LEN 40
>
> @@ -139,6 +140,9 @@ static int kgdboc_option_setup(char *opt)
> }
> strcpy(config, opt);
>
> + /* kgdb causes ftrace self tests to fail (false negatives) */
> + disable_ftrace_selftest();
> +
> return 0;
> }
>
> diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
> index f4233b1..54ff26c 100644
> --- a/include/linux/ftrace.h
> +++ b/include/linux/ftrace.h
> @@ -19,6 +19,12 @@
>
> #include <asm/ftrace.h>
>
> +#if defined(CONFIG_FUNCTION_TRACER) && defined(CONFIG_FTRACE_STARTUP_TEST)
> +extern void disable_ftrace_selftest(void);
> +#else
> +static inline void disable_ftrace_selftest(void) { }
> +#endif
> +
> /*
> * If the arch supports passing the variable contents of
> * function_trace_op as the third parameter back from the
> diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c
> index a7329b7..063561a 100644
> --- a/kernel/trace/trace_selftest.c
> +++ b/kernel/trace/trace_selftest.c
> @@ -635,6 +635,13 @@ out:
> return ret;
> }
>
> +static bool ftrace_selftest_disabled;
> +
> +void disable_ftrace_selftest(void)
> +{
> + ftrace_selftest_disabled = true;
> +}
> +
> /*
> * Simple verification test of ftrace function tracer.
> * Enable ftrace, sleep 1/10 second, and then read the trace
> @@ -654,6 +661,11 @@ trace_selftest_startup_function(struct tracer *trace, struct trace_array *tr)
> }
> #endif
>
> + if (ftrace_selftest_disabled) {
> + printk(KERN_CONT " ... DISABLED: force PASS ... ");
> + return 0;
> + }
> +
> /* make sure msleep has been recorded */
> msleep(1);
>
> @@ -748,6 +760,11 @@ trace_selftest_startup_function_graph(struct tracer *trace,
> }
> #endif
>
> + if (ftrace_selftest_disabled) {
> + printk(KERN_CONT " ... DISABLED: force PASS ... ");
> + return 0;
> + }
> +
> /*
> * Simulate the init() callback but we attach a watchdog callback
> * to detect and recover from possible hangs
>
>
> -- Steve
--
Thanks,
Yogesh
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Ftrace][Bug] Failed on adding breakpoints, when used with kgdboc
2014-02-10 17:29 ` yogesh tillu
@ 2014-02-10 18:03 ` Steven Rostedt
0 siblings, 0 replies; 4+ messages in thread
From: Steven Rostedt @ 2014-02-10 18:03 UTC (permalink / raw)
To: yogesh tillu; +Cc: linux-kernel, Prasun Kapoor, Masami Hiramatsu
On Mon, 10 Feb 2014 22:59:24 +0530
yogesh tillu <tillu.yogesh@gmail.com> wrote:
> Hi Steve,
> Thanks for the reply.
> Can we follow the approach of using api ftrace_set_notrace_ip (like
> ftrace_set_filter_ip ), and register ip for the notrace hash list from
> kgdb x86 arch code at the time of adding/removing breakpoint.
>
>
I'm not sure that will work. I have no problem skipping ftrace tests if
kgdb is enabled on boot up. That's just self test debugging anyway, and
pretty much useless for most people but those developing ftrace.
The reason I say it wont work, is that the filters are not global. That
is, you can call those "don't trace this function" API, and it will
only work for the ftrace function tracer. There's other users of ftrace
(perf, kprobes, stack-tracer, etc) that will still trace whatever it
wanted to trace.
As the bug only happens when function tracing is being enabled or
disabled when the kgdb breakpoint exists, I don't think this is
that much of a problem. I'm sure you could cause it to fail again, but
this always requires root privilege, for both ftrace and kgdb, and the
worse thing that happens is you get that splat and the function tracer
is disabled. It wont crash the kernel or do any other harm.
By skipping the start up tests, it is highly unlikely kgdb will trip up
function tracing unless you still have those break points around.
Now, if kgdb always keeps a breakpoint at do_page_fault() handler, then
perhaps we can do one of two things. The one, is like you said, don't
do function tracing on that function (skip it if kgdb is enabled).
The other is to be more like kprobes, and have kgdb hook into the
ftrace infrastructure. That is, if you find that you are about to add a
breakpoint to the start of a function, and that address happens to have
an ftrace _fentry_ call to it (or nop). Then just register your own
ftrace handler with the "REGS" flag, and the call back will act just
like a breakpoint, but only faster :-)
-- Steve
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-02-10 18:03 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-02-07 14:08 [Ftrace][Bug] Failed on adding breakpoints, when used with kgdboc yogesh tillu
2014-02-07 14:34 ` Steven Rostedt
2014-02-10 17:29 ` yogesh tillu
2014-02-10 18:03 ` Steven Rostedt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®