From: Pavel Machek <pavel@ucw.cz>
To: Greg KH <gregkh@linuxfoundation.org>
Cc: "Marcel Holtmann" <marcel@holtmann.org>,
"Pali Rohár" <pali.rohar@gmail.com>,
"Miguel Oliveira" <cmroliv@gmail.com>,
gulsah.1004@gmail.com, peter.p.waskiewicz.jr@intel.com,
kristina.martsenko@gmail.com, linux-kernel@vger.kernel.org
Subject: [PATCH 1/3] staging: nokia_h4: switch to right types and use bdaddr_t
Date: Sun, 10 Aug 2014 09:29:59 +0200 [thread overview]
Message-ID: <20140810072959.GA19735@amd.pavel.ucw.cz> (raw)
In-Reply-To: <20140807202407.GC6060@kroah.com>
Switch bluetooth address to right type and use bacmp to replace
explicit checks for zero addresses.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
diff --git a/drivers/staging/nokia_h4p/hci_h4p.h b/drivers/staging/nokia_h4p/hci_h4p.h
index 99c4da6..76eaaaa 100644
--- a/drivers/staging/nokia_h4p/hci_h4p.h
+++ b/drivers/staging/nokia_h4p/hci_h4p.h
@@ -77,7 +77,7 @@ struct hci_h4p_info {
unsigned long rx_state;
unsigned long garbage_bytes;
- u8 bd_addr[6];
+ bdaddr_t bd_addr;
struct sk_buff_head *fw_q;
int pm_enabled;
diff --git a/drivers/staging/nokia_h4p/nokia_core.c b/drivers/staging/nokia_h4p/nokia_core.c
index 775e1d0..79d8b01 100644
--- a/drivers/staging/nokia_h4p/nokia_core.c
+++ b/drivers/staging/nokia_h4p/nokia_core.c
@@ -993,7 +993,7 @@ static ssize_t hci_h4p_store_bdaddr(struct device *dev,
for (i = 0; i < 6; i++) {
if (bdaddr[i] > 0xff)
return -EINVAL;
- info->bd_addr[i] = bdaddr[i] & 0xff;
+ info->bd_addr.b[i] = bdaddr[i] & 0xff;
}
return count;
@@ -1004,7 +1004,7 @@ static ssize_t hci_h4p_show_bdaddr(struct device *dev,
{
struct hci_h4p_info *info = dev_get_drvdata(dev);
- return sprintf(buf, "%pMR\n", info->bd_addr);
+ return sprintf(buf, "%pMR\n", info->bd_addr.b);
}
static DEVICE_ATTR(bdaddr, S_IRUGO | S_IWUSR, hci_h4p_show_bdaddr,
diff --git a/drivers/staging/nokia_h4p/nokia_fw-bcm.c b/drivers/staging/nokia_h4p/nokia_fw-bcm.c
index 14fe3ae..054a78b 100644
--- a/drivers/staging/nokia_h4p/nokia_fw-bcm.c
+++ b/drivers/staging/nokia_h4p/nokia_fw-bcm.c
@@ -30,17 +30,17 @@ static int hci_h4p_bcm_set_bdaddr(struct hci_h4p_info *info,
{
int i;
static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf};
- int not_valid = !bacmp(info->bd_addr, BDADDR_ANY);
+ int not_valid = !bacmp(&info->bd_addr, BDADDR_ANY);
if (not_valid) {
dev_info(info->dev, "Valid bluetooth address not found, setting some random\n");
/* When address is not valid, use some random but Nokia MAC */
- memcpy(info->bd_addr, nokia_oui, 3);
- get_random_bytes(info->bd_addr + 3, 3);
+ memcpy(info->bd_addr.b, nokia_oui, 3);
+ get_random_bytes(info->bd_addr.b + 3, 3);
}
for (i = 0; i < 6; i++)
- skb->data[9 - i] = info->bd_addr[i];
+ skb->data[9 - i] = info->bd_addr.b[i];
return 0;
}
diff --git a/drivers/staging/nokia_h4p/nokia_fw-csr.c b/drivers/staging/nokia_h4p/nokia_fw-csr.c
index 925ed86d0..a2c58c4 100644
--- a/drivers/staging/nokia_h4p/nokia_fw-csr.c
+++ b/drivers/staging/nokia_h4p/nokia_fw-csr.c
@@ -48,7 +48,7 @@ int hci_h4p_bc4_send_fw(struct hci_h4p_info *info,
static const u8 nokia_oui[3] = {0x00, 0x19, 0x4F};
struct sk_buff *skb;
unsigned int offset;
- int retries, count, i, not_valid;
+ int retries, count, not_valid;
unsigned long flags;
info->fw_error = 0;
@@ -65,21 +65,21 @@ int hci_h4p_bc4_send_fw(struct hci_h4p_info *info,
skb->data[offset + 1] = 0x00;
skb->data[offset + 5] = 0x00;
- not_valid = !bacmp(info->bd_addr, BDADDR_ANY);
+ not_valid = !bacmp(&info->bd_addr, BDADDR_ANY);
if (not_valid) {
dev_info(info->dev, "Valid bluetooth address not found, setting some random\n");
/* When address is not valid, use some random */
- memcpy(info->bd_addr, nokia_oui, 3);
- get_random_bytes(info->bd_addr + 3, 3);
+ memcpy(info->bd_addr.b, nokia_oui, 3);
+ get_random_bytes(info->bd_addr.b + 3, 3);
}
- skb->data[offset + 7] = info->bd_addr[0];
- skb->data[offset + 6] = info->bd_addr[1];
- skb->data[offset + 4] = info->bd_addr[2];
- skb->data[offset + 0] = info->bd_addr[3];
- skb->data[offset + 3] = info->bd_addr[4];
- skb->data[offset + 2] = info->bd_addr[5];
+ skb->data[offset + 7] = info->bd_addr.b[0];
+ skb->data[offset + 6] = info->bd_addr.b[1];
+ skb->data[offset + 4] = info->bd_addr.b[2];
+ skb->data[offset + 0] = info->bd_addr.b[3];
+ skb->data[offset + 3] = info->bd_addr.b[4];
+ skb->data[offset + 2] = info->bd_addr.b[5];
}
for (count = 1; ; count++) {
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next prev parent reply other threads:[~2014-08-10 7:30 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-30 10:27 [PATCH] staging: nokia_h4: nokia_core.c: use usleep_range() instead of msleep() Miguel Oliveira
2014-05-30 11:34 ` Pavel Machek
2014-05-30 11:52 ` Marcel Holtmann
2014-05-30 12:30 ` Pavel Machek
2014-05-30 15:59 ` Greg KH
2014-05-30 16:15 ` Pali Rohár
2014-05-30 16:36 ` Greg KH
2014-08-06 20:56 ` Marcel Holtmann
2014-08-06 21:30 ` Pavel Machek
2014-08-07 0:25 ` Greg KH
2014-08-07 8:13 ` [PATCH] staging: nokia_h4: use more consistent name for intermediate object Pavel Machek
2014-08-07 20:24 ` Greg KH
2014-08-09 15:48 ` Pavel Machek
2014-08-10 7:29 ` Pavel Machek [this message]
2014-08-10 7:31 ` [PATCH 2/3] staging: nokia_h4: avoid __uX types Pavel Machek
2014-08-10 7:33 ` [PATCH 3/3] staging: use inlines where it makes sense Pavel Machek
2014-08-10 7:34 ` [PATCH] bluetooth: avoid using __uX types Pavel Machek
2014-08-07 9:07 ` [PATCH] staging: nokia_h4: merge firmware together so that we can reduce ammount of exports Pavel Machek
2014-08-07 9:36 ` Pavel Machek
2014-08-07 14:48 ` Marcel Holtmann
2014-08-09 15:47 ` Pavel Machek
2014-05-30 12:15 ` [PATCH] staging: nokia_h4: nokia_core.c: use usleep_range() instead of msleep() Miguel Oliveira
2014-05-30 12:35 ` Pavel Machek
2014-05-30 12:58 ` Miguel Oliveira
2014-05-30 16:01 ` Greg KH
2014-05-30 16:05 ` Miguel Oliveira
2014-05-30 16:13 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140810072959.GA19735@amd.pavel.ucw.cz \
--to=pavel@ucw.cz \
--cc=cmroliv@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=gulsah.1004@gmail.com \
--cc=kristina.martsenko@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=pali.rohar@gmail.com \
--cc=peter.p.waskiewicz.jr@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®