From: Guenter Roeck <linux@roeck-us.net>
To: "Li.Xiubo@freescale.com" <Li.Xiubo@freescale.com>
Cc: "wim@iguana.be" <wim@iguana.be>,
"mpa@pengutronix.de" <mpa@pengutronix.de>,
"linux-watchdog@vger.kernel.org" <linux-watchdog@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>
Subject: Re: [PATCHv2] watchdog: imx2_wdt: Convert to use regmap framework's endianness method.
Date: Fri, 5 Sep 2014 09:06:40 -0700 [thread overview]
Message-ID: <20140905160640.GB12374@roeck-us.net> (raw)
In-Reply-To: <54446636ab294eed83c4a4e3d405dfe7@BY2PR0301MB0613.namprd03.prod.outlook.com>
On Fri, Sep 05, 2014 at 07:11:31AM +0000, Li.Xiubo@freescale.com wrote:
> Hi,
>
> Ping :)
>
Wim usually picks up patches shortly before the next release window opens.
It is in my watchdog-next branch, so it is not forgotten. I'll send a pull
request to Wim after -rc5.
Wim, I am wondering - should I ask Stephen to add my watchdog-next branch to
linux-next ? I know it isn't really perfect, and there is no guarantee that
you will accept the patches in my branch, but it would expose the pending
patches to earlier visibility in -next.
Thanks,
Guenter
> Thanks,
>
> BRs
> Xiubo
>
>
> > -----Original Message-----
> > From: Xiubo Li [mailto:Li.Xiubo@freescale.com]
> > Sent: Monday, August 25, 2014 3:55 PM
> > To: wim@iguana.be; linux@roeck-us.net; mpa@pengutronix.de; linux-
> > watchdog@vger.kernel.org
> > Cc: linux-kernel@vger.kernel.org; devicetree@vger.kernel.org; Xiubo Li-B47053
> > Subject: [PATCHv2] watchdog: imx2_wdt: Convert to use regmap framework's
> > endianness method.
> >
> > Regmap framework will contain some patches to handle endianess, and there
> > does not need any parsing of endianness DT properties of individual driver,
> > so we can savely remove it here.
> >
> > Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
> > Cc: Markus Pargmann <mpa@pengutronix.de>
> > Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> > ---
> >
> > Changes in v2:
> > - Remove useless header file.
> >
> >
> >
> >
> > Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt | 4 ++--
> > drivers/watchdog/imx2_wdt.c | 9 +--------
> > 2 files changed, 3 insertions(+), 10 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt
> > b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt
> > index e52ba2d..9e1ebe2 100644
> > --- a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt
> > +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt
> > @@ -6,8 +6,8 @@ Required properties:
> > - interrupts : Should contain WDT interrupt
> >
> > Optional property:
> > -- big-endian: If present the watchdog device's registers are implemented
> > - in big endian mode, otherwise in little mode.
> > +- big-endian: Boolean property, required if all the i.MX WDT registers
> > + are big-endian rather than little-endian.
> >
> > Examples:
> >
> > diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
> > index 68c3d37..afc8738 100644
> > --- a/drivers/watchdog/imx2_wdt.c
> > +++ b/drivers/watchdog/imx2_wdt.c
> > @@ -28,7 +28,6 @@
> > #include <linux/kernel.h>
> > #include <linux/module.h>
> > #include <linux/moduleparam.h>
> > -#include <linux/of_address.h>
> > #include <linux/platform_device.h>
> > #include <linux/regmap.h>
> > #include <linux/timer.h>
> > @@ -182,7 +181,7 @@ static struct watchdog_ops imx2_wdt_ops = {
> > .set_timeout = imx2_wdt_set_timeout,
> > };
> >
> > -static struct regmap_config imx2_wdt_regmap_config = {
> > +static const struct regmap_config imx2_wdt_regmap_config = {
> > .reg_bits = 16,
> > .reg_stride = 2,
> > .val_bits = 16,
> > @@ -191,12 +190,10 @@ static struct regmap_config imx2_wdt_regmap_config = {
> >
> > static int __init imx2_wdt_probe(struct platform_device *pdev)
> > {
> > - struct device_node *np = pdev->dev.of_node;
> > struct imx2_wdt_device *wdev;
> > struct watchdog_device *wdog;
> > struct resource *res;
> > void __iomem *base;
> > - bool big_endian;
> > int ret;
> > u32 val;
> >
> > @@ -204,10 +201,6 @@ static int __init imx2_wdt_probe(struct platform_device
> > *pdev)
> > if (!wdev)
> > return -ENOMEM;
> >
> > - big_endian = of_property_read_bool(np, "big-endian");
> > - if (big_endian)
> > - imx2_wdt_regmap_config.val_format_endian = REGMAP_ENDIAN_BIG;
> > -
> > res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > base = devm_ioremap_resource(&pdev->dev, res);
> > if (IS_ERR(base))
> > --
> > 1.8.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-09-05 16:06 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-25 7:54 Xiubo Li
2014-09-05 7:11 ` Li.Xiubo
2014-09-05 16:06 ` Guenter Roeck [this message]
2014-09-09 1:37 ` Li.Xiubo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140905160640.GB12374@roeck-us.net \
--to=linux@roeck-us.net \
--cc=Li.Xiubo@freescale.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=mpa@pengutronix.de \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®