From: "Li.Xiubo@freescale.com" <Li.Xiubo@freescale.com>
To: "wim@iguana.be" <wim@iguana.be>,
"linux@roeck-us.net" <linux@roeck-us.net>,
"mpa@pengutronix.de" <mpa@pengutronix.de>,
"linux-watchdog@vger.kernel.org" <linux-watchdog@vger.kernel.org>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>
Subject: RE: [PATCHv2] watchdog: imx2_wdt: Convert to use regmap framework's endianness method.
Date: Fri, 5 Sep 2014 07:11:31 +0000 [thread overview]
Message-ID: <54446636ab294eed83c4a4e3d405dfe7@BY2PR0301MB0613.namprd03.prod.outlook.com> (raw)
In-Reply-To: <1408953277-2069-1-git-send-email-Li.Xiubo@freescale.com>
Hi,
Ping :)
Thanks,
BRs
Xiubo
> -----Original Message-----
> From: Xiubo Li [mailto:Li.Xiubo@freescale.com]
> Sent: Monday, August 25, 2014 3:55 PM
> To: wim@iguana.be; linux@roeck-us.net; mpa@pengutronix.de; linux-
> watchdog@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org; devicetree@vger.kernel.org; Xiubo Li-B47053
> Subject: [PATCHv2] watchdog: imx2_wdt: Convert to use regmap framework's
> endianness method.
>
> Regmap framework will contain some patches to handle endianess, and there
> does not need any parsing of endianness DT properties of individual driver,
> so we can savely remove it here.
>
> Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
> Cc: Markus Pargmann <mpa@pengutronix.de>
> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> ---
>
> Changes in v2:
> - Remove useless header file.
>
>
>
>
> Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt | 4 ++--
> drivers/watchdog/imx2_wdt.c | 9 +--------
> 2 files changed, 3 insertions(+), 10 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt
> b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt
> index e52ba2d..9e1ebe2 100644
> --- a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt
> @@ -6,8 +6,8 @@ Required properties:
> - interrupts : Should contain WDT interrupt
>
> Optional property:
> -- big-endian: If present the watchdog device's registers are implemented
> - in big endian mode, otherwise in little mode.
> +- big-endian: Boolean property, required if all the i.MX WDT registers
> + are big-endian rather than little-endian.
>
> Examples:
>
> diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
> index 68c3d37..afc8738 100644
> --- a/drivers/watchdog/imx2_wdt.c
> +++ b/drivers/watchdog/imx2_wdt.c
> @@ -28,7 +28,6 @@
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/moduleparam.h>
> -#include <linux/of_address.h>
> #include <linux/platform_device.h>
> #include <linux/regmap.h>
> #include <linux/timer.h>
> @@ -182,7 +181,7 @@ static struct watchdog_ops imx2_wdt_ops = {
> .set_timeout = imx2_wdt_set_timeout,
> };
>
> -static struct regmap_config imx2_wdt_regmap_config = {
> +static const struct regmap_config imx2_wdt_regmap_config = {
> .reg_bits = 16,
> .reg_stride = 2,
> .val_bits = 16,
> @@ -191,12 +190,10 @@ static struct regmap_config imx2_wdt_regmap_config = {
>
> static int __init imx2_wdt_probe(struct platform_device *pdev)
> {
> - struct device_node *np = pdev->dev.of_node;
> struct imx2_wdt_device *wdev;
> struct watchdog_device *wdog;
> struct resource *res;
> void __iomem *base;
> - bool big_endian;
> int ret;
> u32 val;
>
> @@ -204,10 +201,6 @@ static int __init imx2_wdt_probe(struct platform_device
> *pdev)
> if (!wdev)
> return -ENOMEM;
>
> - big_endian = of_property_read_bool(np, "big-endian");
> - if (big_endian)
> - imx2_wdt_regmap_config.val_format_endian = REGMAP_ENDIAN_BIG;
> -
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> base = devm_ioremap_resource(&pdev->dev, res);
> if (IS_ERR(base))
> --
> 1.8.5
next prev parent reply other threads:[~2014-09-05 7:11 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-25 7:54 Xiubo Li
2014-09-05 7:11 ` Li.Xiubo [this message]
2014-09-05 16:06 ` Guenter Roeck
2014-09-09 1:37 ` Li.Xiubo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54446636ab294eed83c4a4e3d405dfe7@BY2PR0301MB0613.namprd03.prod.outlook.com \
--to=li.xiubo@freescale.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mpa@pengutronix.de \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®