* [PATCH] drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
@ 2014-12-04 1:24 Rafael J. Wysocki
2014-12-04 3:58 ` Simon Horman
0 siblings, 1 reply; 3+ messages in thread
From: Rafael J. Wysocki @ 2014-12-04 1:24 UTC (permalink / raw)
To: Simon Horman, Geert Uytterhoeven
Cc: linux-sh, Magnus Damm, Linux PM list, Linux Kernel Mailing List
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks
depending on CONFIG_PM_RUNTIME may now be changed to depend on
CONFIG_PM.
Replace CONFIG_PM_RUNTIME with CONFIG_PM in drivers/sh/pm_runtime.c.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
Note: This depends on commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if
PM_SLEEP is selected) which is only in linux-next at the moment (via the
linux-pm tree).
Please let me know if it is OK to take this one into linux-pm.
---
drivers/sh/pm_runtime.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
Index: linux-pm/drivers/sh/pm_runtime.c
===================================================================
--- linux-pm.orig/drivers/sh/pm_runtime.c
+++ linux-pm/drivers/sh/pm_runtime.c
@@ -20,7 +20,7 @@
#include <linux/bitmap.h>
#include <linux/slab.h>
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int sh_pm_runtime_suspend(struct device *dev)
{
int ret;
@@ -68,7 +68,7 @@ static struct dev_pm_domain default_pm_d
#define DEFAULT_PM_DOMAIN_PTR NULL
-#endif /* CONFIG_PM_RUNTIME */
+#endif /* CONFIG_PM */
static struct pm_clk_notifier_block platform_bus_notifier = {
.pm_domain = DEFAULT_PM_DOMAIN_PTR,
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
2014-12-04 1:24 [PATCH] drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM Rafael J. Wysocki
@ 2014-12-04 3:58 ` Simon Horman
2014-12-04 9:01 ` Geert Uytterhoeven
0 siblings, 1 reply; 3+ messages in thread
From: Simon Horman @ 2014-12-04 3:58 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Geert Uytterhoeven, linux-sh, Magnus Damm, Linux PM list,
Linux Kernel Mailing List
On Thu, Dec 04, 2014 at 02:24:22AM +0100, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
> selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks
> depending on CONFIG_PM_RUNTIME may now be changed to depend on
> CONFIG_PM.
>
> Replace CONFIG_PM_RUNTIME with CONFIG_PM in drivers/sh/pm_runtime.c.
>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
>
> Note: This depends on commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if
> PM_SLEEP is selected) which is only in linux-next at the moment (via the
> linux-pm tree).
>
> Please let me know if it is OK to take this one into linux-pm.
Hi Rafael,
That is fine by me if it is fine by Geert.
Acked-by: Simon Horman <horms+renesas@verge.net.au>
>
> ---
> drivers/sh/pm_runtime.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> Index: linux-pm/drivers/sh/pm_runtime.c
> ===================================================================
> --- linux-pm.orig/drivers/sh/pm_runtime.c
> +++ linux-pm/drivers/sh/pm_runtime.c
> @@ -20,7 +20,7 @@
> #include <linux/bitmap.h>
> #include <linux/slab.h>
>
> -#ifdef CONFIG_PM_RUNTIME
> +#ifdef CONFIG_PM
> static int sh_pm_runtime_suspend(struct device *dev)
> {
> int ret;
> @@ -68,7 +68,7 @@ static struct dev_pm_domain default_pm_d
>
> #define DEFAULT_PM_DOMAIN_PTR NULL
>
> -#endif /* CONFIG_PM_RUNTIME */
> +#endif /* CONFIG_PM */
>
> static struct pm_clk_notifier_block platform_bus_notifier = {
> .pm_domain = DEFAULT_PM_DOMAIN_PTR,
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
2014-12-04 3:58 ` Simon Horman
@ 2014-12-04 9:01 ` Geert Uytterhoeven
0 siblings, 0 replies; 3+ messages in thread
From: Geert Uytterhoeven @ 2014-12-04 9:01 UTC (permalink / raw)
To: Simon Horman
Cc: Rafael J. Wysocki, Linux-sh list, Magnus Damm, Linux PM list,
Linux Kernel Mailing List
On Thu, Dec 4, 2014 at 4:58 AM, Simon Horman <horms@verge.net.au> wrote:
> On Thu, Dec 04, 2014 at 02:24:22AM +0100, Rafael J. Wysocki wrote:
>> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>>
>> After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
>> selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks
>> depending on CONFIG_PM_RUNTIME may now be changed to depend on
>> CONFIG_PM.
>>
>> Replace CONFIG_PM_RUNTIME with CONFIG_PM in drivers/sh/pm_runtime.c.
>>
>> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>> ---
>>
>> Note: This depends on commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if
>> PM_SLEEP is selected) which is only in linux-next at the moment (via the
>> linux-pm tree).
>>
>> Please let me know if it is OK to take this one into linux-pm.
>
> Hi Rafael,
>
> That is fine by me if it is fine by Geert.
>
> Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-12-04 9:01 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-12-04 1:24 [PATCH] drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM Rafael J. Wysocki
2014-12-04 3:58 ` Simon Horman
2014-12-04 9:01 ` Geert Uytterhoeven
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®