* [PATCH] SPI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
@ 2014-12-06 2:30 Rafael J. Wysocki
2014-12-09 16:17 ` Mark Brown
0 siblings, 1 reply; 2+ messages in thread
From: Rafael J. Wysocki @ 2014-12-06 2:30 UTC (permalink / raw)
To: Mark Brown
Cc: Daniel Mack, Haojian Zhuang, Robert Jarzmik, Heiko Stuebner,
Ben Dooks, Kukjin Kim, linux-spi, Linux Kernel Mailing List,
Linux PM list
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks
depending on CONFIG_PM_RUNTIME may now be changed to depend on
CONFIG_PM.
Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under
drivers/spi/.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
Note: This depends on commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if
PM_SLEEP is selected) which is only in linux-next at the moment (via the
linux-pm tree).
Please let me know if it is OK to take this one into linux-pm.
---
drivers/spi/spi-coldfire-qspi.c | 2 +-
drivers/spi/spi-orion.c | 2 +-
drivers/spi/spi-pxa2xx.c | 2 +-
drivers/spi/spi-qup.c | 4 ++--
drivers/spi/spi-rockchip.c | 4 ++--
drivers/spi/spi-s3c64xx.c | 4 ++--
6 files changed, 9 insertions(+), 9 deletions(-)
Index: linux-pm/drivers/spi/spi-s3c64xx.c
===================================================================
--- linux-pm.orig/drivers/spi/spi-s3c64xx.c
+++ linux-pm/drivers/spi/spi-s3c64xx.c
@@ -1266,7 +1266,7 @@ static int s3c64xx_spi_resume(struct dev
}
#endif /* CONFIG_PM_SLEEP */
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int s3c64xx_spi_runtime_suspend(struct device *dev)
{
struct spi_master *master = dev_get_drvdata(dev);
@@ -1296,7 +1296,7 @@ static int s3c64xx_spi_runtime_resume(st
return 0;
}
-#endif /* CONFIG_PM_RUNTIME */
+#endif /* CONFIG_PM */
static const struct dev_pm_ops s3c64xx_spi_pm = {
SET_SYSTEM_SLEEP_PM_OPS(s3c64xx_spi_suspend, s3c64xx_spi_resume)
Index: linux-pm/drivers/spi/spi-coldfire-qspi.c
===================================================================
--- linux-pm.orig/drivers/spi/spi-coldfire-qspi.c
+++ linux-pm/drivers/spi/spi-coldfire-qspi.c
@@ -491,7 +491,7 @@ static int mcfqspi_resume(struct device
}
#endif
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int mcfqspi_runtime_suspend(struct device *dev)
{
struct spi_master *master = dev_get_drvdata(dev);
Index: linux-pm/drivers/spi/spi-qup.c
===================================================================
--- linux-pm.orig/drivers/spi/spi-qup.c
+++ linux-pm/drivers/spi/spi-qup.c
@@ -646,7 +646,7 @@ error:
return ret;
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int spi_qup_pm_suspend_runtime(struct device *device)
{
struct spi_master *master = dev_get_drvdata(device);
@@ -672,7 +672,7 @@ static int spi_qup_pm_resume_runtime(str
writel_relaxed(config, controller->base + QUP_CONFIG);
return 0;
}
-#endif /* CONFIG_PM_RUNTIME */
+#endif /* CONFIG_PM */
#ifdef CONFIG_PM_SLEEP
static int spi_qup_suspend(struct device *device)
Index: linux-pm/drivers/spi/spi-orion.c
===================================================================
--- linux-pm.orig/drivers/spi/spi-orion.c
+++ linux-pm/drivers/spi/spi-orion.c
@@ -523,7 +523,7 @@ static int orion_spi_remove(struct platf
MODULE_ALIAS("platform:" DRIVER_NAME);
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int orion_spi_runtime_suspend(struct device *dev)
{
struct spi_master *master = dev_get_drvdata(dev);
Index: linux-pm/drivers/spi/spi-rockchip.c
===================================================================
--- linux-pm.orig/drivers/spi/spi-rockchip.c
+++ linux-pm/drivers/spi/spi-rockchip.c
@@ -801,7 +801,7 @@ static int rockchip_spi_resume(struct de
}
#endif /* CONFIG_PM_SLEEP */
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int rockchip_spi_runtime_suspend(struct device *dev)
{
struct spi_master *master = dev_get_drvdata(dev);
@@ -829,7 +829,7 @@ static int rockchip_spi_runtime_resume(s
return ret;
}
-#endif /* CONFIG_PM_RUNTIME */
+#endif /* CONFIG_PM */
static const struct dev_pm_ops rockchip_spi_pm = {
SET_SYSTEM_SLEEP_PM_OPS(rockchip_spi_suspend, rockchip_spi_resume)
Index: linux-pm/drivers/spi/spi-pxa2xx.c
===================================================================
--- linux-pm.orig/drivers/spi/spi-pxa2xx.c
+++ linux-pm/drivers/spi/spi-pxa2xx.c
@@ -1307,7 +1307,7 @@ static int pxa2xx_spi_resume(struct devi
}
#endif
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int pxa2xx_spi_runtime_suspend(struct device *dev)
{
struct driver_data *drv_data = dev_get_drvdata(dev);
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] SPI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
2014-12-06 2:30 [PATCH] SPI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM Rafael J. Wysocki
@ 2014-12-09 16:17 ` Mark Brown
0 siblings, 0 replies; 2+ messages in thread
From: Mark Brown @ 2014-12-09 16:17 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Daniel Mack, Haojian Zhuang, Robert Jarzmik, Heiko Stuebner,
Ben Dooks, Kukjin Kim, linux-spi, Linux Kernel Mailing List,
Linux PM list
[-- Attachment #1: Type: text/plain, Size: 505 bytes --]
On Sat, Dec 06, 2014 at 03:30:23AM +0100, Rafael J. Wysocki wrote:
> Note: This depends on commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if
> PM_SLEEP is selected) which is only in linux-next at the moment (via the
> linux-pm tree).
> Please let me know if it is OK to take this one into linux-pm.
Acked-by: Mark Brown <broonie@kernel.org>
if you fix the subject line to resemble the style for the subsystem
(spi: ) - using normal subject line styles really helps spot relevant
mails in the inbox.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-12-09 16:17 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-12-06 2:30 [PATCH] SPI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM Rafael J. Wysocki
2014-12-09 16:17 ` Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®