Re: [PATCHv2 00/12] usb: ulpi bus

[David Cohen <david.a.cohen@linux.intel.com>]

Hi,

On Wed, Mar 18, 2015 at 02:40:21PM +0200, Heikki Krogerus wrote:
> 
> Major changes since v1:
> - calling dwc3_phy_setup earlier and registering the ULPI interface there.
> - new property to dwc3 for selecting the interface in case of UTMI+ and ULPI as
>   suggested by Felipe
> - dwc3 soft reset before registration of the ULPI interface to sync the clocks
>   as suggested by David
> - Including support for the BYT boards that have the GPIOs controlling the reset
>   and cs signals.
> 
> 
> Heikki Krogerus (12):
>   usb: add bus type for USB ULPI
>   usb: dwc3: USB2 PHY register access bits
>   usb: dwc3: ULPI or UTMI+ select
>   usb: dwc3: store driver data earlier
>   usb: dwc3: cache hwparams earlier
>   usb: dwc3: soft reset to it's own function
>   usb: dwc3: setup phys earlier
>   usb: dwc3: add hsphy_interface property
>   usb: dwc3: pci: add quirk for Baytrails
>   usb: dwc3: add ULPI interface support
>   phy: helpers for USB ULPI PHY registering
>   phy: add driver for TI TUSB1210 ULPI PHY

Except for my comment on patch "9/12", this version looks fine on my
side.

BR, David