Re: [PATCHv2 09/12] usb: dwc3: pci: add quirk for Baytrails

[Heikki Krogerus <heikki.krogerus@linux.intel.com>]

> > @@ -65,6 +76,31 @@ static int dwc3_pci_quirks(struct pci_dev *pdev)
> >  						sizeof(pdata));
> >  	}
> >  
> > +	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
> > +	    pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
> > +		struct gpio_desc *gpio;
> > +
> > +		acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
> > +					  acpi_dwc3_byt_gpios);
> > +
> > +		gpio = gpiod_get(&pdev->dev, "reset");
> > +		if (IS_ERR(gpio))
> > +			return 0;
> > +
> > +		/* These GPIOs will turn on the USB2 PHY */
> > +		gpiod_direction_output(gpio, 0);
> > +		gpiod_set_value_cansleep(gpio, 1);
> > +		gpiod_put(gpio);
> > +
> > +		gpio = gpiod_get(&pdev->dev, "cs");
> 
> CS GPIO should be handled before RESET.

OK, I'll fix it.


Thanks,

-- 
heikki