From: NeilBrown <neil@brown.name>
To: Sebastian Reichel <sre@kernel.org>
Cc: NeilBrown <neilb@suse.de>,
linux-api@vger.kernel.org, linux-kernel@vger.kernel.org,
GTA04 owners <gta04-owner@goldelico.com>,
inux-pm@vger.kernel.org, Pavel Machek <pavel@ucw.cz>,
linux-omap@vger.kernel.org, Lee Jones <lee.jones@linaro.org>
Subject: [PATCH 05/14] twl4030_charger: split uA calculation into a function.
Date: Mon, 23 Mar 2015 10:20:28 +1100 [thread overview]
Message-ID: <20150322232028.23789.60327.stgit@notabene.brown> (raw)
In-Reply-To: <20150322231635.23789.70149.stgit@notabene.brown>
From: NeilBrown <neilb@suse.de>
We will need this calculation in other places, so
create functions to map between register value and uA value.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/power/twl4030_charger.c | 48 ++++++++++++++++++++++++++++-----------
1 file changed, 35 insertions(+), 13 deletions(-)
diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c
index 0e62a5ae56a3..c9a7efbb9141 100644
--- a/drivers/power/twl4030_charger.c
+++ b/drivers/power/twl4030_charger.c
@@ -178,6 +178,40 @@ static int twl4030_is_battery_present(struct twl4030_bci *bci)
}
/*
+ * TI provided formulas:
+ * CGAIN == 0: ICHG = (BCIICHG * 1.7) / (2^10 - 1) - 0.85
+ * CGAIN == 1: ICHG = (BCIICHG * 3.4) / (2^10 - 1) - 1.7
+ * Here we use integer approximation of:
+ * CGAIN == 0: val * 1.6618 - 0.85 * 1000
+ * CGAIN == 1: (val * 1.6618 - 0.85 * 1000) * 2
+ */
+/*
+ * convert twl register value for currents into uA
+ */
+static int regval2ua(int regval, bool cgain)
+{
+ if (cgain)
+ return (regval * 16618 - 8500 * 1000) / 5;
+ else
+ return (regval * 16618 - 8500 * 1000) / 10;
+}
+
+/*
+ * convert uA currents into twl register value
+ */
+static int ua2regval(int ua, bool cgain)
+{
+ int ret;
+ if (cgain)
+ ua /= 2;
+ ret = (ua * 10 + 8500 * 1000) / 16618;
+ /* rounding problems */
+ if (ret < 512)
+ ret = 512;
+ return ret;
+}
+
+/*
* Enable/Disable USB Charge functionality.
*/
static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
@@ -366,14 +400,6 @@ static int twl4030_bci_usb_ncb(struct notifier_block *nb, unsigned long val,
return NOTIFY_OK;
}
-/*
- * TI provided formulas:
- * CGAIN == 0: ICHG = (BCIICHG * 1.7) / (2^10 - 1) - 0.85
- * CGAIN == 1: ICHG = (BCIICHG * 3.4) / (2^10 - 1) - 1.7
- * Here we use integer approximation of:
- * CGAIN == 0: val * 1.6618 - 0.85
- * CGAIN == 1: (val * 1.6618 - 0.85) * 2
- */
static int twl4030_charger_get_current(void)
{
int curr;
@@ -388,11 +414,7 @@ static int twl4030_charger_get_current(void)
if (ret)
return ret;
- ret = (curr * 16618 - 850 * 10000) / 10;
- if (bcictl1 & TWL4030_CGAIN)
- ret *= 2;
-
- return ret;
+ return regval2ua(curr, bcictl1 & TWL4030_CGAIN);
}
/*
next prev parent reply other threads:[~2015-03-22 23:21 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-22 23:20 [PATCH 00/14] Enhance twl4030_charger functionality. - V2 NeilBrown
2015-03-22 23:20 ` NeilBrown [this message]
2015-03-22 23:20 ` [PATCH 03/14] twl4030_charger: use runtime_pm to keep usb phy active while charging NeilBrown
2015-03-22 23:20 ` [PATCH 01/14] twl4030_charger: use devm_request_threaded_irq NeilBrown
2015-07-24 14:34 ` Sebastian Reichel
2015-03-22 23:20 ` [PATCH 04/14] twl4030_charger: trust phy to determine when USB power is available NeilBrown
2015-03-22 23:20 ` [PATCH 02/14] twl4030_charger: use devres for power_supply_register and kzalloc NeilBrown
2015-03-23 21:25 ` Pavel Machek
2015-07-24 14:35 ` Sebastian Reichel
2015-03-22 23:20 ` [PATCH 13/14] twl4030_charger: Increase current carefully while watching voltage NeilBrown
2015-03-23 21:25 ` Pavel Machek
2015-03-29 21:26 ` NeilBrown
2015-04-04 7:48 ` Pavel Machek
2015-03-22 23:20 ` [PATCH 09/14] twl4030_charger: only draw USB current as negotiated with host NeilBrown
2015-03-22 23:20 ` [PATCH 14/14] twl4030_charger: assume a 'charger' can supply maximum current NeilBrown
2015-03-22 23:20 ` [PATCH 12/14] twl4030_charger: add ac/mode to match usb/mode NeilBrown
2015-03-22 23:20 ` [PATCH 07/14] twl4030_charger: distinguish between USB current and 'AC' current NeilBrown
2015-03-22 23:20 ` [PATCH 11/14] twl4030_charger: add software controlled linear charging mode NeilBrown
2015-03-22 23:20 ` [PATCH 08/14] twl4030_charger: allow max_current to be managed via sysfs NeilBrown
2015-03-23 12:14 ` [Gta04-owner] " jake42
2015-07-29 22:10 ` NeilBrown
2015-03-22 23:20 ` [PATCH 06/14] twl4030_charger: allow fine control of charger current NeilBrown
2015-03-22 23:20 ` [PATCH 10/14] twl4030_charger: enable manual enable/disable of usb charging NeilBrown
2015-07-24 14:44 ` [PATCH 00/14] Enhance twl4030_charger functionality. - V2 Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150322232028.23789.60327.stgit@notabene.brown \
--to=neil@brown.name \
--cc=gta04-owner@goldelico.com \
--cc=inux-pm@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-api@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=neilb@suse.de \
--cc=pavel@ucw.cz \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome