Re: [PATCHv3 00/12] usb: ulpi bus

[Felipe Balbi <balbi@ti.com>]

[-- Attachment #1: Type: text/plain, Size: 1280 bytes --]

Hi,

On Tue, Apr 28, 2015 at 04:24:35PM +0300, Heikki Krogerus wrote:
> Hi,
> 
> I took the liberty of adding David's ACK to everything except 9/12, including to
> the 1/12 (removing the module handling has no functional affect).
> 
> Changes since v2:
> - remove module handling from the bus driver as suggested by Paul Bolle.
> - reordered the gpio requests in BYT quirk as suggested by David Cohen.
> 
> Major changes since v1:
> - calling dwc3_phy_setup earlier and registering the ULPI interface there.
> - new property to dwc3 for selecting the interface in case of UTMI+ and ULPI as
>   suggested by Felipe
> - dwc3 soft reset before registration of the ULPI interface to sync the clocks
>   as suggested by David
> - Including support for the BYT boards that have the GPIOs controlling the reset
>   and cs signals.
> 
> Heikki Krogerus (12):
>   usb: add bus type for USB ULPI
>   usb: dwc3: USB2 PHY register access bits
>   usb: dwc3: ULPI or UTMI+ select
>   usb: dwc3: store driver data earlier
>   usb: dwc3: cache hwparams earlier
>   usb: dwc3: soft reset to it's own function
>   usb: dwc3: setup phys earlier

up to patch 7/12, I've applied to my testing/next. I'll wait for a
revised 8/12 before applying the rest.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]