mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH v2 0/4] net: dsa: mv88e6352: add support for VLAN Table Unit
@ 2015-06-24 18:50 Vivien Didelot
  2015-06-24 18:50 ` [PATCH v2 1/4] net: dsa: mv88e6xxx: add debugfs interface for VTU Vivien Didelot
                   ` (4 more replies)
  0 siblings, 5 replies; 7+ messages in thread
From: Vivien Didelot @ 2015-06-24 18:50 UTC (permalink / raw)
  To: netdev
  Cc: Vivien Didelot, David S. Miller, Scott Feldman, Jiri Pirko,
	Andrew Lunn, Florian Fainelli, Guenter Roeck, linux-kernel,
	Jerome Oufella, kernel

Hi all,

This patchset brings full support for hardware VLANs in DSA, and the Marvell
88E6352 and compatible switch chips.

Patches 1/4 to 3/4 are ready to be applied. However, patch 4/4 brought some
concerns about the management of the forwarding database [1]. That might be
updated in future patches though.

Below is an example of what can be done with this patchset.

    "VID 550: 1t 3u"
    "VID 1000: 2t"
    "VID 1200: 2t 4t"

The VLAN setup above can be achieved with the following bridge commands:

    bridge vlan add vid 550 dev swp1 master
    bridge vlan add vid 550 dev swp3 master untagged pvid
    bridge vlan add vid 1000 dev swp2 master
    bridge vlan add vid 1200 dev swp2 master
    bridge vlan add vid 1200 dev swp4 master

Removing the port 1 from VLAN 550 is done with:

    bridge vlan del vid 550 dev swp1

The bridge command would output the following setup:

    # bridge vlan
    port	vlan ids
    swp0	None
    swp0
    swp1	None
    swp1
    swp2	1000
		1200

    swp2	1000
		1200

    swp3	550 PVID Egress Untagged

    swp3	550 PVID Egress Untagged

    swp4	1200

    swp4	1200

    br0	None

Assuming that swp5 is the CPU port, the "vtu" debugfs file would show:

    # cat /sys/kernel/debug/dsa0/vtu
    VID  FID  SID  P0 P1 P2 P3 P4 P5 P6
    550  562  0    x  x  x  u  x  t  x
    1000 1012 0    x  x  t  x  x  t  x
    1200 1212 0    x  x  t  x  t  t  x

Cheers,
  -v

[1] https://lkml.org/lkml/2015/6/1/752

Vivien Didelot (4):
  net: dsa: mv88e6xxx: add debugfs interface for VTU
  net: dsa: add support for switchdev VLAN objects
  net: dsa: mv88e6xxx: add support to dump VLANs
  net: dsa: mv88e6xxx: add support to add/del VLANs

 drivers/net/dsa/mv88e6352.c |   3 +
 drivers/net/dsa/mv88e6xxx.c | 377 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/dsa/mv88e6xxx.h |  29 ++++
 include/net/dsa.h           |   9 ++
 net/dsa/dsa_priv.h          |   6 +
 net/dsa/slave.c             | 137 ++++++++++++++++
 6 files changed, 561 insertions(+)

-- 
2.4.4


^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2015-06-25  8:18 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-06-24 18:50 [PATCH v2 0/4] net: dsa: mv88e6352: add support for VLAN Table Unit Vivien Didelot
2015-06-24 18:50 ` [PATCH v2 1/4] net: dsa: mv88e6xxx: add debugfs interface for VTU Vivien Didelot
2015-06-24 18:50 ` [PATCH v2 2/4] net: dsa: add support for switchdev VLAN objects Vivien Didelot
2015-06-25  1:52   ` Scott Feldman
2015-06-24 18:50 ` [PATCH v2 3/4] net: dsa: mv88e6xxx: add support to dump VLANs Vivien Didelot
2015-06-24 18:50 ` [PATCH v2 4/4] net: dsa: mv88e6xxx: add support to add/del VLANs Vivien Didelot
2015-06-25  8:29 ` [PATCH v2 0/4] net: dsa: mv88e6352: add support for VLAN Table Unit David Miller

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®