[PATCH] ahci: qoriq: Adjust the default register values on ls1021a

[PATCH] ahci: qoriq: Adjust the default register values on ls1021a

[Yuantian.Tang]

From: Tang Yuantian <Yuantian.Tang@freescale.com>

Updated the registers' values to enhance SATA performance and
reliability on ls1021a soc.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
---
 drivers/ata/ahci_qoriq.c | 24 ++++++++++++++----------
 1 file changed, 14 insertions(+), 10 deletions(-)

diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c
index 256d911..7bdee9b 100644
--- a/drivers/ata/ahci_qoriq.c
+++ b/drivers/ata/ahci_qoriq.c
@@ -34,16 +34,20 @@
 
 /* port register default value */
 #define AHCI_PORT_PHY_1_CFG	0xa003fffe
-#define AHCI_PORT_PHY_2_CFG	0x28183411
-#define AHCI_PORT_PHY_3_CFG	0x0e081004
-#define AHCI_PORT_PHY_4_CFG	0x00480811
-#define AHCI_PORT_PHY_5_CFG	0x192c96a4
 #define AHCI_PORT_TRANS_CFG	0x08000029
-#define LS1043A_PORT_PHY2	0x28184d1f
-#define LS1043A_PORT_PHY3	0x0e081509
+
+/* for ls1021a */
+#define LS1021A_PORT_PHY2	0x28183414
+#define LS1021A_PORT_PHY3	0x0e080e06
+#define LS1021A_PORT_PHY4	0x064a080b
+#define LS1021A_PORT_PHY5	0x2aa86470
 
 #define SATA_ECC_DISABLE	0x00020000
 
+/* for ls1043a */
+#define LS1043A_PORT_PHY2	0x28184d1f
+#define LS1043A_PORT_PHY3	0x0e081509
+
 enum ahci_qoriq_type {
 	AHCI_LS1021A,
 	AHCI_LS1043A,
@@ -153,10 +157,10 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
 	case AHCI_LS1021A:
 		writel(SATA_ECC_DISABLE, qpriv->ecc_addr);
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
-		writel(AHCI_PORT_PHY_2_CFG, reg_base + PORT_PHY2);
-		writel(AHCI_PORT_PHY_3_CFG, reg_base + PORT_PHY3);
-		writel(AHCI_PORT_PHY_4_CFG, reg_base + PORT_PHY4);
-		writel(AHCI_PORT_PHY_5_CFG, reg_base + PORT_PHY5);
+		writel(LS1021A_PORT_PHY2, reg_base + PORT_PHY2);
+		writel(LS1021A_PORT_PHY3, reg_base + PORT_PHY3);
+		writel(LS1021A_PORT_PHY4, reg_base + PORT_PHY4);
+		writel(LS1021A_PORT_PHY5, reg_base + PORT_PHY5);
 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
 		break;
 
-- 
2.1.0.27.g96db324

Re: [PATCH] ahci: qoriq: Adjust the default register values on ls1021a

[Tejun Heo]

On Wed, Dec 16, 2015 at 02:00:35PM +0800, Yuantian.Tang@freescale.com wrote:
> From: Tang Yuantian <Yuantian.Tang@freescale.com>
> 
> Updated the registers' values to enhance SATA performance and
> reliability on ls1021a soc.
> 
> Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>

Applied to libata/for-4.5.

Thanks.

-- 
tejun