From: Joshua Clayton <stillcompiling@gmail.com>
To: Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: rtc-linux@googlegroups.com, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 1/3] rtc: Add functions to set and read rtc offset
Date: Tue, 23 Feb 2016 10:47:13 -0800 [thread overview]
Message-ID: <20160223104713.01508e11@jclayton-pc> (raw)
In-Reply-To: <1454704873-31066-1-git-send-email-stillcompiling@gmail.com>
On Fri, 5 Feb 2016 12:41:11 -0800
Joshua Clayton <stillcompiling@gmail.com> wrote:
Alexandre,
in case you didn't see, I made the change you requested.
The rtc_read_offset function checks for a read_offset function
and returns -EINVAL if not there, instead of an offset of 0.
I just didn't put together a cover letter this time around.
> A number of rtc devices, such as the NXP pcf2123 include a facility
> to adjust the clock in order to compensate for temperature or a
> crystal, capacitor, etc, that results in the rtc clock not running
> at exactly 32.768 kHz.
>
> Data sheets I have seen refer to this as a clock offset, and measure
> it in parts per million, however they often reference ppm to 2 digits
> of precision, which makes integer ppm less than ideal.
>
> We use parts per billion, which more than covers the precision needed
> and works nicely within 32 bits
>
> Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
> ---
> drivers/rtc/interface.c | 54
> +++++++++++++++++++++++++++++++++++++++++++++++++
> include/linux/rtc.h | 4 ++++ 2 files changed, 58 insertions(+)
>
> diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
> index 5836751..9ef5f6f 100644
> --- a/drivers/rtc/interface.c
> +++ b/drivers/rtc/interface.c
> @@ -939,4 +939,58 @@ void
> rtc_t4e40602412d61b7ef4162621a1a15be32126baeeimer_cancel(struct
> rtc_device *rtc, struct rtc_timer *timer)
> mutex_unlock(&rtc->ops_lock); }
> +/**
> + * rtc_read_offset - Read the amount of rtc offset in parts per
> billion
> + * @ rtc: rtc device to be used
> + * @ offset: the offset in parts per billion
> + *
> + * see below for details.
> + *
> + * Kernel interface to read rtc clock offset
> + * Returns 0 on success, or a negative number on error.
> + * If read_offset() is not implemented for the rtc, return -EINVAL
> + */
> +int rtc_read_offset(struct rtc_device *rtc, long *offset)
> +{
> + int ret;
> +
> + if (!rtc->ops)
> + return -ENODEV;
> +
> + if (!rtc->ops->read_offset)
> + return -EINVAL;
> +
> + mutex_lock(&rtc->ops_lock);
> + ret = rtc->ops->read_offset(rtc->dev.parent, offset);
> + mutex_unlock(&rtc->ops_lock);
> + return ret;
> +}
>
> +/**
> + * rtc_set_offset - Adjusts the duration of the average second
> + * @ rtc: rtc device to be used
> + * @ offset: the offset in parts per billion
> + *
> + * Some rtc's allow an adjustment to the average duration of a second
> + * to compensate for differences in the actual clock rate due to
> temperature,
> + * the crystal, capacitor, etc.
> + *
> + * Kernel interface to adjust an rtc clock offset.
> + * Return 0 on success, or a negative number on error.
> + * If the rtc offset is not setable (or not implemented), return
> -EINVAL
> + */
> +int rtc_set_offset(struct rtc_device *rtc, long offset)
> +{
> + int ret;
> +
> + if (!rtc->ops)
> + return -ENODEV;
> +
> + if (!rtc->ops->set_offset)
> + return -EINVAL;
> +
> + mutex_lock(&rtc->ops_lock);
> + ret = rtc->ops->set_offset(rtc->dev.parent, offset);
> + mutex_unlock(&rtc->ops_lock);
> + return ret;
> +}
> diff --git a/include/linux/rtc.h b/include/linux/rtc.h
> index 3359f04..b693ada 100644
> --- a/include/linux/rtc.h
> +++ b/include/linux/rtc.h
> @@ -89,6 +89,8 @@ struct rtc_class_ops {
> int (*set_mmss)(struct device *, unsigned long secs);
> int (*read_callback)(struct device *, int data);
> int (*alarm_irq_enable)(struct device *, unsigned int
> enabled);
> + int (*read_offset)(struct device *, long *offset);
> + int (*set_offset)(struct device *, long offset);
> };
>
> #define RTC_DEVICE_NAME_SIZE 20
> @@ -208,6 +210,8 @@ void rtc_timer_init(struct rtc_timer *timer, void
> (*f)(void *p), void *data); int rtc_timer_start(struct rtc_device
> *rtc, struct rtc_timer *timer, ktime_t expires, ktime_t period);
> void rtc_timer_cancel(struct rtc_device *rtc, struct rtc_timer
> *timer); +int rtc_read_offset(struct rtc_device *rtc, long *offset);
> +int rtc_set_offset(struct rtc_device *rtc, long offset);
> void rtc_timer_do_work(struct work_struct *work);
>
> static inline bool is_leap_year(unsigned int year)
Thanks,
Joshua
next prev parent reply other threads:[~2016-02-23 18:47 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-04 18:31 [PATCH v2 0/8] rtc: enable adjustment of clock offset Joshua Clayton
[not found] ` <0000-cover-letter.patch>
2016-01-04 18:31 ` [PATCH v2 1/8] rtc-pcf2123: define registers and bit macros Joshua Clayton
2016-01-04 18:31 ` [PATCH v2 2/8] rtc-pcf2123: clean up reads from the chip Joshua Clayton
2016-01-04 18:31 ` [PATCH v2 3/8] rtc-pcf2123: clean up writes to the rtc chip Joshua Clayton
2016-01-04 18:31 ` [PATCH v2 4/8] rtc-pcf2123: refactor chip reset into a function Joshua Clayton
2016-01-04 18:31 ` [PATCH v2 5/8] rtc-pcf2123: avoid resetting the clock if possible Joshua Clayton
2016-01-04 18:31 ` [PATCH v2 6/8] rtc: Add functions to set and read clock offset Joshua Clayton
2016-01-04 18:31 ` [PATCH v2 7/8] rtc: implement a sysfs interface for " Joshua Clayton
2016-01-31 11:41 ` Alexandre Belloni
2016-02-01 20:56 ` Joshua Clayton
2016-02-02 10:41 ` Alexandre Belloni
2016-02-03 17:16 ` [PATCH v3 1/3] rtc: Add functions to set and read rtc offset Joshua Clayton
2016-02-04 22:07 ` Alexandre Belloni
2016-02-04 23:32 ` Joshua Clayton
2016-02-05 14:39 ` Alexandre Belloni
2016-02-05 20:41 ` [PATCH v4 " Joshua Clayton
2016-02-05 20:41 ` [PATCH v4 2/3] rtc: implement a sysfs interface for clock offset Joshua Clayton
2016-02-05 20:41 ` [PATCH v4 3/3] rtc-pcf2123: implement read_offset and set_offset Joshua Clayton
2016-02-23 18:47 ` Joshua Clayton [this message]
2016-02-23 21:44 ` [PATCH v4 1/3] rtc: Add functions to set and read rtc offset Alexandre Belloni
2016-02-03 17:16 ` [PATCH v3 2/3] rtc: implement a sysfs interface for clock offset Joshua Clayton
2016-02-04 22:12 ` Alexandre Belloni
2016-02-03 17:16 ` [PATCH v3 3/3] rtc-pcf2123: implement read_offset and set_offset Joshua Clayton
2016-01-04 18:31 ` [PATCH v2 8/8] " Joshua Clayton
2016-01-26 14:56 ` [PATCH v2 0/8] rtc: enable adjustment of clock offset Joshua Clayton
2016-01-26 16:00 ` Alexandre Belloni
2016-01-31 11:29 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160223104713.01508e11@jclayton-pc \
--to=stillcompiling@gmail.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@free-electrons.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rtc-linux@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome