From: Joshua Clayton <stillcompiling@gmail.com>
To: Alexandre Belloni <alexandre.belloni@free-electrons.com>,
Alessandro Zummo <a.zummo@towertech.it>
Cc: rtc-linux@googlegroups.com, linux-kernel@vger.kernel.org,
Joshua Clayton <stillcompiling@gmail.com>
Subject: [PATCH v2 2/8] rtc-pcf2123: clean up reads from the chip
Date: Mon, 4 Jan 2016 10:31:20 -0800 [thread overview]
Message-ID: <d4add810d4260d2d741e6b2960e44e664f7898c9.1451929910.git.stillcompiling@gmail.com> (raw)
In-Reply-To: <cover.1451928661.git.stillcompiling@gmail.com>
In-Reply-To: <0000-cover-letter.patch>
Put read operations into a function.
This improves modularity and readability.
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
---
drivers/rtc/rtc-pcf2123.c | 36 +++++++++++++++++++-----------------
1 file changed, 19 insertions(+), 17 deletions(-)
diff --git a/drivers/rtc/rtc-pcf2123.c b/drivers/rtc/rtc-pcf2123.c
index be3ec83..4c4b3fc 100644
--- a/drivers/rtc/rtc-pcf2123.c
+++ b/drivers/rtc/rtc-pcf2123.c
@@ -128,12 +128,23 @@ static inline void pcf2123_delay_trec(void)
ndelay(30);
}
+static int pcf2123_read(struct device *dev, u8 reg, u8 *rxbuf, size_t size)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ int ret;
+
+ reg |= PCF2123_READ;
+ ret = spi_write_then_read(spi, ®, 1, rxbuf, size);
+ pcf2123_delay_trec();
+
+ return ret;
+}
+
static ssize_t pcf2123_show(struct device *dev, struct device_attribute *attr,
char *buffer)
{
- struct spi_device *spi = to_spi_device(dev);
struct pcf2123_sysfs_reg *r;
- u8 txbuf[1], rxbuf[1];
+ u8 rxbuf[1];
unsigned long reg;
int ret;
@@ -143,11 +154,10 @@ static ssize_t pcf2123_show(struct device *dev, struct device_attribute *attr,
if (ret)
return ret;
- txbuf[0] = PCF2123_READ | reg;
- ret = spi_write_then_read(spi, txbuf, 1, rxbuf, 1);
+ ret = pcf2123_read(dev, reg, rxbuf, 1);
if (ret < 0)
return -EIO;
- pcf2123_delay_trec();
+
return sprintf(buffer, "0x%x\n", rxbuf[0]);
}
@@ -182,16 +192,12 @@ static ssize_t pcf2123_store(struct device *dev, struct device_attribute *attr,
static int pcf2123_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
- struct spi_device *spi = to_spi_device(dev);
- u8 txbuf[1], rxbuf[7];
+ u8 rxbuf[7];
int ret;
- txbuf[0] = PCF2123_READ | PCF2123_REG_SC;
- ret = spi_write_then_read(spi, txbuf, sizeof(txbuf),
- rxbuf, sizeof(rxbuf));
+ ret = pcf2123_read(dev, PCF2123_REG_SC, rxbuf, sizeof(rxbuf));
if (ret < 0)
return ret;
- pcf2123_delay_trec();
tm->tm_sec = bcd2bin(rxbuf[0] & 0x7F);
tm->tm_min = bcd2bin(rxbuf[1] & 0x7F);
@@ -297,16 +303,12 @@ static int pcf2123_probe(struct spi_device *spi)
pcf2123_delay_trec();
/* See if the counter was actually stopped */
- txbuf[0] = PCF2123_READ | PCF2123_REG_CTRL1;
- dev_dbg(&spi->dev, "checking for presence of RTC (0x%02X)\n",
- txbuf[0]);
- ret = spi_write_then_read(spi, txbuf, 1 * sizeof(u8),
- rxbuf, 2 * sizeof(u8));
+ dev_dbg(&spi->dev, "checking for presence of RTC\n");
+ ret = pcf2123_read(&spi->dev, PCF2123_REG_CTRL1, rxbuf, sizeof(rxbuf));
dev_dbg(&spi->dev, "received data from RTC (0x%02X 0x%02X)\n",
rxbuf[0], rxbuf[1]);
if (ret < 0)
goto kfree_exit;
- pcf2123_delay_trec();
if (!(rxbuf[0] & 0x20)) {
dev_err(&spi->dev, "chip not found\n");
--
2.5.0
next prev parent reply other threads:[~2016-01-04 18:31 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-04 18:31 [PATCH v2 0/8] rtc: enable adjustment of clock offset Joshua Clayton
[not found] ` <0000-cover-letter.patch>
2016-01-04 18:31 ` [PATCH v2 1/8] rtc-pcf2123: define registers and bit macros Joshua Clayton
2016-01-04 18:31 ` Joshua Clayton [this message]
2016-01-04 18:31 ` [PATCH v2 3/8] rtc-pcf2123: clean up writes to the rtc chip Joshua Clayton
2016-01-04 18:31 ` [PATCH v2 4/8] rtc-pcf2123: refactor chip reset into a function Joshua Clayton
2016-01-04 18:31 ` [PATCH v2 5/8] rtc-pcf2123: avoid resetting the clock if possible Joshua Clayton
2016-01-04 18:31 ` [PATCH v2 6/8] rtc: Add functions to set and read clock offset Joshua Clayton
2016-01-04 18:31 ` [PATCH v2 7/8] rtc: implement a sysfs interface for " Joshua Clayton
2016-01-31 11:41 ` Alexandre Belloni
2016-02-01 20:56 ` Joshua Clayton
2016-02-02 10:41 ` Alexandre Belloni
2016-02-03 17:16 ` [PATCH v3 1/3] rtc: Add functions to set and read rtc offset Joshua Clayton
2016-02-04 22:07 ` Alexandre Belloni
2016-02-04 23:32 ` Joshua Clayton
2016-02-05 14:39 ` Alexandre Belloni
2016-02-05 20:41 ` [PATCH v4 " Joshua Clayton
2016-02-05 20:41 ` [PATCH v4 2/3] rtc: implement a sysfs interface for clock offset Joshua Clayton
2016-02-05 20:41 ` [PATCH v4 3/3] rtc-pcf2123: implement read_offset and set_offset Joshua Clayton
2016-02-23 18:47 ` [PATCH v4 1/3] rtc: Add functions to set and read rtc offset Joshua Clayton
2016-02-23 21:44 ` Alexandre Belloni
2016-02-03 17:16 ` [PATCH v3 2/3] rtc: implement a sysfs interface for clock offset Joshua Clayton
2016-02-04 22:12 ` Alexandre Belloni
2016-02-03 17:16 ` [PATCH v3 3/3] rtc-pcf2123: implement read_offset and set_offset Joshua Clayton
2016-01-04 18:31 ` [PATCH v2 8/8] " Joshua Clayton
2016-01-26 14:56 ` [PATCH v2 0/8] rtc: enable adjustment of clock offset Joshua Clayton
2016-01-26 16:00 ` Alexandre Belloni
2016-01-31 11:29 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d4add810d4260d2d741e6b2960e44e664f7898c9.1451929910.git.stillcompiling@gmail.com \
--to=stillcompiling@gmail.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@free-electrons.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rtc-linux@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome