From: Mike Travis <travis@sgi.com>
To: Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
Thomas Gleixner <tglx@linutronix.de>,
Andrew Morton <akpm@linux-foundation.org>,
Len Brown <len.brown@intel.com>,
Dimitri Sivanich <sivanich@sgi.com>
Cc: Russ Anderson <rja@sgi.com>, John Estabrook <estabrook@sgi.com>,
Andrew Banman <abanman@sgi.com>, Nathan Zimmer <nzimmer@sgi.com>,
x86@kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 16/21] X86_64, UV: Add obtaining GAM Range Table from UV BIOS
Date: Thu, 28 Apr 2016 18:10:47 -0500 [thread overview]
Message-ID: <20160428231034.425804755@asylum.americas.sgi.com> (raw)
In-Reply-To: <20160428231031.265120287@asylum.americas.sgi.com>
[-- Attachment #1: uv4_get_uv_systab --]
[-- Type: text/plain, Size: 6738 bytes --]
UV4 uses a GAM (globally addressed memory) architecture that supports
variable sized memory per node. This replaces the old "M" value (number
of address bits per node) with a range table for conversions between
addresses and physical node (pnode) id's. This table is obtained from UV
BIOS via the EFI UVsystab table. Support for older EFI UVsystab tables
is maintained.
Signed-off-by: Mike Travis <travis@sgi.com>
Tested-by: Dimitri Sivanich <sivanich@sgi.com>
Tested-by: John Estabrook <estabrook@sgi.com>
Tested-by: Gary Kroening <gfk@sgi.com>
Tested-by: Nathan Zimmer <nzimmer@sgi.com>
---
arch/x86/include/asm/uv/bios.h | 59 ++++++++++++++++++++++++++++++++++++++--
arch/x86/platform/uv/bios_uv.c | 48 +++++++++++++++-----------------
arch/x86/platform/uv/uv_sysfs.c | 2 -
3 files changed, 81 insertions(+), 28 deletions(-)
--- linux.orig/arch/x86/include/asm/uv/bios.h
+++ linux/arch/x86/include/asm/uv/bios.h
@@ -51,15 +51,66 @@ enum {
BIOS_STATUS_UNAVAIL = -EBUSY
};
+/* Address map parameters */
+struct uv_gam_parameters {
+ u64 mmr_base;
+ u64 gru_base;
+ u8 mmr_shift; /* Convert PNode to MMR space offset */
+ u8 gru_shift; /* Convert PNode to GRU space offset */
+ u8 gpa_shift; /* Size of offset field in GRU phys addr */
+ u8 unused1;
+};
+
+/* UV_TABLE_GAM_RANGE_ENTRY values */
+#define UV_GAM_RANGE_TYPE_UNUSED 0 /* End of table */
+#define UV_GAM_RANGE_TYPE_RAM 1 /* Normal RAM */
+#define UV_GAM_RANGE_TYPE_NVRAM 2 /* Non-volatile memory */
+#define UV_GAM_RANGE_TYPE_NV_WINDOW 3 /* NVMDIMM block window */
+#define UV_GAM_RANGE_TYPE_NV_MAILBOX 4 /* NVMDIMM mailbox */
+#define UV_GAM_RANGE_TYPE_HOLE 5 /* Unused address range */
+#define UV_GAM_RANGE_TYPE_MAX 6
+
+/* The structure stores PA bits 56:26, for 64MB granularity */
+#define UV_GAM_RANGE_SHFT 26 /* 64MB */
+
+struct uv_gam_range_entry {
+ char type; /* Entry type: GAM_RANGE_TYPE_UNUSED, etc. */
+ char unused1;
+ u16 nasid; /* HNasid */
+ u16 sockid; /* Socket ID, high bits of APIC ID */
+ u16 pnode; /* Index to MMR and GRU spaces */
+ u32 pxm; /* ACPI proximity domain number */
+ u32 limit; /* PA bits 56:26 (UV_GAM_RANGE_SHFT) */
+};
+
+#define UV_SYSTAB_SIG "UVST"
+#define UV_SYSTAB_VERSION_1 1 /* UV1/2/3 BIOS version */
+#define UV_SYSTAB_VERSION_UV4 0x400 /* UV4 BIOS base version */
+#define UV_SYSTAB_VERSION_UV4_1 0x401 /* + gpa_shift */
+#define UV_SYSTAB_VERSION_UV4_2 0x402 /* + TYPE_NVRAM/WINDOW/MBOX */
+#define UV_SYSTAB_VERSION_UV4_LATEST UV_SYSTAB_VERSION_UV4_2
+
+#define UV_SYSTAB_TYPE_UNUSED 0 /* End of table (offset == 0) */
+#define UV_SYSTAB_TYPE_GAM_PARAMS 1 /* GAM PARAM conversions */
+#define UV_SYSTAB_TYPE_GAM_RNG_TBL 2 /* GAM entry table */
+#define UV_SYSTAB_TYPE_MAX 3
+
/*
* The UV system table describes specific firmware
* capabilities available to the Linux kernel at runtime.
*/
struct uv_systab {
- char signature[4]; /* must be "UVST" */
+ char signature[4]; /* must be UV_SYSTAB_SIG */
u32 revision; /* distinguish different firmware revs */
u64 function; /* BIOS runtime callback function ptr */
+ u32 size; /* systab size (starting with _VERSION_UV4) */
+ struct {
+ u32 type:8; /* type of entry */
+ u32 offset:24; /* byte offset from struct start to entry */
+ } entry[1]; /* additional entries follow */
};
+extern struct uv_systab *uv_systab;
+/* (... end of definitions from UV BIOS ...) */
enum {
BIOS_FREQ_BASE_PLATFORM = 0,
@@ -99,7 +150,11 @@ extern s64 uv_bios_change_memprotect(u64
extern s64 uv_bios_reserved_page_pa(u64, u64 *, u64 *, u64 *);
extern int uv_bios_set_legacy_vga_target(bool decode, int domain, int bus);
+#ifdef CONFIG_EFI
extern void uv_bios_init(void);
+#else
+void uv_bios_init(void) { }
+#endif
extern unsigned long sn_rtc_cycles_per_second;
extern int uv_type;
@@ -107,7 +162,7 @@ extern long sn_partition_id;
extern long sn_coherency_id;
extern long sn_region_size;
extern long system_serial_number;
-#define partition_coherence_id() (sn_coherency_id)
+#define uv_partition_coherence_id() (sn_coherency_id)
extern struct kobject *sgi_uv_kobj; /* /sys/firmware/sgi_uv */
--- linux.orig/arch/x86/platform/uv/bios_uv.c
+++ linux/arch/x86/platform/uv/bios_uv.c
@@ -21,19 +21,20 @@
#include <linux/efi.h>
#include <linux/export.h>
+#include <linux/slab.h>
#include <asm/efi.h>
#include <linux/io.h>
#include <asm/uv/bios.h>
#include <asm/uv/uv_hub.h>
-static struct uv_systab uv_systab;
+struct uv_systab *uv_systab;
s64 uv_bios_call(enum uv_bios_cmd which, u64 a1, u64 a2, u64 a3, u64 a4, u64 a5)
{
- struct uv_systab *tab = &uv_systab;
+ struct uv_systab *tab = uv_systab;
s64 ret;
- if (!tab->function)
+ if (!tab || !tab->function)
/*
* BIOS does not support UV systab
*/
@@ -183,34 +184,31 @@ int uv_bios_set_legacy_vga_target(bool d
}
EXPORT_SYMBOL_GPL(uv_bios_set_legacy_vga_target);
-
#ifdef CONFIG_EFI
void uv_bios_init(void)
{
- struct uv_systab *tab;
-
- if ((efi.uv_systab == EFI_INVALID_TABLE_ADDR) ||
- (efi.uv_systab == (unsigned long)NULL)) {
- printk(KERN_CRIT "No EFI UV System Table.\n");
- uv_systab.function = (unsigned long)NULL;
+ uv_systab = NULL;
+ if ((efi.uv_systab == EFI_INVALID_TABLE_ADDR) || !efi.uv_systab) {
+ pr_crit("UV: UVsystab: missing\n");
return;
}
- tab = (struct uv_systab *)ioremap(efi.uv_systab,
- sizeof(struct uv_systab));
- if (strncmp(tab->signature, "UVST", 4) != 0)
- printk(KERN_ERR "bad signature in UV system table!");
-
- /*
- * Copy table to permanent spot for later use.
- */
- memcpy(&uv_systab, tab, sizeof(struct uv_systab));
- iounmap(tab);
+ uv_systab = ioremap(efi.uv_systab, sizeof(struct uv_systab));
+ if (!uv_systab || strncmp(uv_systab->signature, UV_SYSTAB_SIG, 4)) {
+ pr_err("UV: UVsystab: bad signature!\n");
+ iounmap(uv_systab);
+ return;
+ }
- printk(KERN_INFO "EFI UV System Table Revision %d\n",
- uv_systab.revision);
+ if (uv_systab->revision >= UV_SYSTAB_VERSION_UV4) {
+ iounmap(uv_systab);
+ uv_systab = ioremap(efi.uv_systab, uv_systab->size);
+ if (!uv_systab) {
+ pr_err("UV: UVsystab: ioremap(%d) failed!\n",
+ uv_systab->size);
+ return;
+ }
+ }
+ pr_info("UV: UVsystab: Revision:%x\n", uv_systab->revision);
}
-#else /* !CONFIG_EFI */
-
-void uv_bios_init(void) { }
#endif
--- linux.orig/arch/x86/platform/uv/uv_sysfs.c
+++ linux/arch/x86/platform/uv/uv_sysfs.c
@@ -34,7 +34,7 @@ static ssize_t partition_id_show(struct
static ssize_t coherence_id_show(struct kobject *kobj,
struct kobj_attribute *attr, char *buf)
{
- return snprintf(buf, PAGE_SIZE, "%ld\n", partition_coherence_id());
+ return snprintf(buf, PAGE_SIZE, "%ld\n", uv_partition_coherence_id());
}
static struct kobj_attribute partition_id_attr =
--
next prev parent reply other threads:[~2016-04-28 23:12 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-28 23:10 [PATCH 00/21] X86_64, UV: Update kernel for SGI UV4 support Mike Travis
2016-04-28 23:10 ` [PATCH 01/21] X86_64, UV: Add Initial UV4 definitions Mike Travis
2016-04-28 23:10 ` [PATCH 02/21] X86_64, UV: Add UV Architecture Defines Mike Travis
2016-04-28 23:10 ` [PATCH 03/21] X86_64, UV: Add UV4 Specific Defines Mike Travis
2016-04-28 23:10 ` [PATCH 04/21] X86_64, UV: Add UV MMR Illegal Access Function Mike Travis
2016-04-28 23:10 ` [PATCH 05/21] X86_64, UV: Prep for UV4 MMR updates Mike Travis
2016-04-28 23:10 ` [PATCH 06/21] X86_64, UV: Add UV4 Specific MMR definitions Mike Travis
2016-04-28 23:10 ` [PATCH 07/21] X86_64, UV: Enable/Disable UV1 only workaround code Mike Travis
2016-04-29 7:40 ` Ingo Molnar
2016-04-28 23:10 ` [PATCH 08/21] X86_64, UV: Clean up redunduncies after merge of UV4 MMR definitions Mike Travis
2016-04-28 23:10 ` [PATCH 09/21] X86_64, UV: Update MMIOH setup function to work for both UV3 and UV4 Mike Travis
2016-04-28 23:10 ` [PATCH 10/21] X86_64, UV: Create per cpu info structs to replace per hub info structs Mike Travis
2016-04-28 23:10 ` [PATCH 11/21] X86_64, UV: Move scir info to the per cpu info struct Mike Travis
2016-04-28 23:10 ` [PATCH 12/21] X86_64, UV: Move blade local processor ID " Mike Travis
2016-04-28 23:10 ` [PATCH 13/21] X86_64, UV: Allocate common per node hub info structs on local node Mike Travis
2016-04-28 23:10 ` [PATCH 14/21] X86_64, UV: Fold blade info into per node hub info structs Mike Travis
2016-04-28 23:10 ` [PATCH 15/21] X86_64, UV: Add UV4 addressing discovery function Mike Travis
2016-04-28 23:10 ` Mike Travis [this message]
2016-04-28 23:10 ` [PATCH 17/21] X86_64, UV: Support UV4 socket address changes Mike Travis
2016-04-28 23:10 ` [PATCH 18/21] X86_64, UV: Build GAM reference tables Mike Travis
2016-04-28 23:10 ` [PATCH 19/21] X86_64, UV: Update physical address conversions for UV4 Mike Travis
2016-04-28 23:10 ` [PATCH 20/21] X86_64, UV: Remove Obsolete GRU MMR address translation Mike Travis
2016-04-28 23:10 ` [PATCH 21/21] X86_64, UV: Fix incorrect nodes and pnodes for cpuless and memoryless nodes Mike Travis
-- strict thread matches above, loose matches on Subject: below --
2016-04-29 21:54 [PATCH 00/21] X86_64, UV: Update kernel for SGI UV4 support Mike Travis
2016-04-29 21:54 ` [PATCH 16/21] X86_64, UV: Add obtaining GAM Range Table from UV BIOS Mike Travis
2016-04-28 0:54 [PATCH 00/21] X86_64, UV: Update kernel for SGI UV4 support Mike Travis
2016-04-28 0:55 ` [PATCH 16/21] X86_64, UV: Add obtaining GAM Range Table from UV BIOS Mike Travis
2016-04-28 8:55 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160428231034.425804755@asylum.americas.sgi.com \
--to=travis@sgi.com \
--cc=abanman@sgi.com \
--cc=akpm@linux-foundation.org \
--cc=estabrook@sgi.com \
--cc=hpa@zytor.com \
--cc=len.brown@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=nzimmer@sgi.com \
--cc=rja@sgi.com \
--cc=sivanich@sgi.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®