From: Paul Gortmaker <paul.gortmaker@windriver.com>
To: <linux-kernel@vger.kernel.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
<linux-clk@vger.kernel.org>
Subject: [PATCH 03/10] clk: mvebu: make cp110-system-controller explicitly non-modular
Date: Mon, 4 Jul 2016 17:12:13 -0400 [thread overview]
Message-ID: <20160704211220.5685-4-paul.gortmaker@windriver.com> (raw)
In-Reply-To: <20160704211220.5685-1-paul.gortmaker@windriver.com>
The Kconfig currently controlling compilation of this code is:
drivers/clk/mvebu/Kconfig:config ARMADA_CP110_SYSCON
drivers/clk/mvebu/Kconfig: bool
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.
Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: linux-clk@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
---
drivers/clk/mvebu/cp110-system-controller.c | 34 +++--------------------------
1 file changed, 3 insertions(+), 31 deletions(-)
diff --git a/drivers/clk/mvebu/cp110-system-controller.c b/drivers/clk/mvebu/cp110-system-controller.c
index 7fa42d6b2b92..15c8b76cc27f 100644
--- a/drivers/clk/mvebu/cp110-system-controller.c
+++ b/drivers/clk/mvebu/cp110-system-controller.c
@@ -30,7 +30,7 @@
#include <linux/clk-provider.h>
#include <linux/mfd/syscon.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
@@ -362,45 +362,17 @@ fail0:
return ret;
}
-static int cp110_syscon_clk_remove(struct platform_device *pdev)
-{
- int i;
-
- of_clk_del_provider(pdev->dev.of_node);
-
- for (i = 0; i < CP110_MAX_GATABLE_CLOCKS; i++) {
- struct clk *clk = cp110_clks[CP110_MAX_CORE_CLOCKS + i];
-
- if (clk)
- cp110_unregister_gate(clk);
- }
-
- clk_unregister_fixed_factor(cp110_clks[CP110_CORE_NAND]);
- clk_unregister_fixed_factor(cp110_clks[CP110_CORE_CORE]);
- clk_unregister_fixed_factor(cp110_clks[CP110_CORE_EIP]);
- clk_unregister_fixed_factor(cp110_clks[CP110_CORE_PPV2]);
- clk_unregister_fixed_rate(cp110_clks[CP110_CORE_APLL]);
-
- return 0;
-}
-
static const struct of_device_id cp110_syscon_of_match[] = {
{ .compatible = "marvell,cp110-system-controller0", },
{ }
};
-MODULE_DEVICE_TABLE(of, armada8k_pcie_of_match);
static struct platform_driver cp110_syscon_driver = {
.probe = cp110_syscon_clk_probe,
- .remove = cp110_syscon_clk_remove,
.driver = {
.name = "marvell-cp110-system-controller0",
.of_match_table = cp110_syscon_of_match,
+ .suppress_bind_attrs = true,
},
};
-
-module_platform_driver(cp110_syscon_driver);
-
-MODULE_DESCRIPTION("Marvell CP110 System Controller 0 driver");
-MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>");
-MODULE_LICENSE("GPL");
+builtin_platform_driver(cp110_syscon_driver);
--
2.8.4
next prev parent reply other threads:[~2016-07-04 21:12 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-04 21:12 [PATCH 00/10] clk: fix/remove module usage in non-modular code Paul Gortmaker
2016-07-04 21:12 ` [PATCH 01/10] clk: meson8b: make it explicitly non-modular Paul Gortmaker
2016-07-06 22:21 ` Michael Turquette
2016-07-04 21:12 ` [PATCH 02/10] clk: meson: make gxbb " Paul Gortmaker
2016-07-06 22:21 ` Michael Turquette
2016-07-04 21:12 ` Paul Gortmaker [this message]
2016-11-04 20:32 ` [PATCH 03/10] clk: mvebu: make cp110-system-controller " Stephen Boyd
2016-07-04 21:12 ` [PATCH 04/10] clk: mvebu: make ap806-system-controller " Paul Gortmaker
2016-11-04 20:33 ` Stephen Boyd
2016-07-04 21:12 ` [PATCH 05/10] clk: oxnas: make it " Paul Gortmaker
2016-07-06 13:11 ` Neil Armstrong
2016-07-06 22:21 ` Michael Turquette
2016-07-04 21:12 ` [PATCH 06/10] clk: samsung make clk-exynos-audss " Paul Gortmaker
2016-07-05 9:04 ` Krzysztof Kozlowski
2016-07-05 13:32 ` Paul Gortmaker
2016-07-05 11:02 ` Geert Uytterhoeven
2016-07-05 13:17 ` Paul Gortmaker
2016-07-07 13:12 ` Sylwester Nawrocki
2016-07-04 21:12 ` [PATCH 07/10] clk: samsung: make clk-s5pv210-audss " Paul Gortmaker
2016-07-06 10:49 ` Sylwester Nawrocki
2016-07-13 10:32 ` Sylwester Nawrocki
2016-07-13 21:59 ` Michael Turquette
2016-07-04 21:12 ` [PATCH 08/10] clk: sunxi: make clk-* " Paul Gortmaker
2016-07-04 21:36 ` Boris Brezillon
2016-07-05 6:13 ` Maxime Ripard
2016-07-06 22:22 ` Michael Turquette
2016-07-04 21:12 ` [PATCH 09/10] clk: tegra: make clk-tegra124-dfll-fcpu " Paul Gortmaker
2016-11-04 20:33 ` Stephen Boyd
2016-07-04 21:12 ` [PATCH 10/10] clk: ti: make clk-dra7-atl " Paul Gortmaker
2016-11-04 20:35 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160704211220.5685-4-paul.gortmaker@windriver.com \
--to=paul.gortmaker@windriver.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@codeaurora.org \
--cc=thomas.petazzoni@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome