From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Rob Herring <robh+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Mike Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>
Cc: devicetree@vger.kernel.org,
Andre Przywara <andre.przywara@arm.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
Maxime Ripard <maxime.ripard@free-electrons.com>
Subject: [PATCH 13/13] arm64: dts: add Pine64 support
Date: Tue, 26 Jul 2016 22:30:41 +0200 [thread overview]
Message-ID: <20160726203041.29366-14-maxime.ripard@free-electrons.com> (raw)
In-Reply-To: <20160726203041.29366-1-maxime.ripard@free-electrons.com>
From: Andre Przywara <andre.przywara@arm.com>
The Pine64 is a cost-efficient development board based on the
Allwinner A64 SoC.
There are three models: the basic version with Fast Ethernet and
512 MB of DRAM (Pine64) and two Pine64+ versions, which both
feature Gigabit Ethernet and additional connectors for touchscreens
and a camera. Or as my son put it: "Those are smaller and these are
missing." ;-)
The two Pine64+ models just differ in the amount of DRAM
(1GB vs. 2GB). Since U-Boot will figure out the right size for us and
patches the DT accordingly we just need to provide one DT for the
Pine64+.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
[Maxime: Removed the common DTSI and include directly the pine64 DTS]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/allwinner/Makefile | 5 ++
.../boot/dts/allwinner/sun50i-a64-pine64-plus.dts | 50 ++++++++++++++++
.../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 70 ++++++++++++++++++++++
4 files changed, 126 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/Makefile
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 6e199c903676..ddcbf5a2c17e 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -1,4 +1,5 @@
dts-dirs += al
+dts-dirs += allwinner
dts-dirs += altera
dts-dirs += amd
dts-dirs += amlogic
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
new file mode 100644
index 000000000000..1e29a5ae8282
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
new file mode 100644
index 000000000000..790d14daaa6a
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun50i-a64-pine64.dts"
+
+/ {
+ model = "Pine64+";
+ compatible = "pine64,pine64-plus", "allwinner,sun50i-a64";
+
+ /* TODO: Camera, Ethernet PHY, touchscreen, etc. */
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
new file mode 100644
index 000000000000..da9bca51f5a9
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -0,0 +1,70 @@
+/*
+ * Copyright (c) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+
+/ {
+ model = "Pine64";
+ compatible = "pine64,pine64", "allwinner,sun50i-a64";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "okay";
+};
--
2.9.2
next prev parent reply other threads:[~2016-07-26 20:34 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-26 20:30 [PATCH 00/13] arm64: Allwinner A64 support based on sunxi-ng Maxime Ripard
2016-07-26 20:30 ` [PATCH 01/13] clk: sunxi-ng: mux: Rename mux macro to be consistent Maxime Ripard
2016-07-26 20:30 ` [PATCH 02/13] clk: sunxi-ng: mux: Add mux table support Maxime Ripard
2016-07-26 20:30 ` [PATCH 03/13] clk: sunxi-ng: sun8i: Rename DDR and video plls Maxime Ripard
2016-07-27 7:57 ` kbuild test robot
2016-07-26 20:30 ` [PATCH 04/13] clk: sunxi-ng: sun8i: Fix register offset Maxime Ripard
2016-07-26 20:30 ` [PATCH 05/13] clk: sunxi-ng: sun8i: Rename H3 only clocks Maxime Ripard
2016-07-26 20:30 ` [PATCH 06/13] clk: sunxi-ng: sun8i: Move fixed factors around Maxime Ripard
2016-07-26 20:30 ` [PATCH 07/13] clk: sunxi-ng: sun8i: Prefix clock defines by SoC Name Maxime Ripard
2016-07-26 20:30 ` [PATCH 08/13] clk: sunxi-ng: Add A64 clocks Maxime Ripard
2016-07-29 21:15 ` Rob Herring
2016-07-26 20:30 ` [PATCH 09/13] arm64: sunxi: Kconfig: add essential pinctrl driver Maxime Ripard
2016-07-26 20:30 ` [PATCH 10/13] arm64: Kconfig: sunxi: add PINCTRL Maxime Ripard
2016-07-26 20:30 ` [PATCH 11/13] Documentation: devicetree: add vendor prefix for Pine64 Maxime Ripard
2016-07-26 20:30 ` [PATCH 12/13] arm64: dts: add Allwinner A64 SoC .dtsi Maxime Ripard
2016-09-08 8:41 ` Andre Przywara
2016-09-09 20:04 ` Maxime Ripard
2016-07-26 20:30 ` Maxime Ripard [this message]
2016-07-27 8:46 ` [PATCH 00/13] arm64: Allwinner A64 support based on sunxi-ng Jean-Francois Moine
2016-07-28 20:07 ` Maxime Ripard
2016-07-29 5:48 ` Jean-Francois Moine
2016-07-31 8:51 ` Maxime Ripard
2016-08-01 1:43 ` André Przywara
2016-08-01 8:30 ` Jean-Francois Moine
2016-08-01 9:13 ` Chen-Yu Tsai
2016-08-01 12:00 ` Jean-Francois Moine
2016-08-01 12:01 ` Chen-Yu Tsai
2016-08-01 12:11 ` Jean-Francois Moine
2016-08-01 10:44 ` Andre Przywara
2016-08-01 9:11 ` Chen-Yu Tsai
2016-08-11 0:36 ` André Przywara
2016-08-23 19:31 ` Maxime Ripard
2016-08-24 23:54 ` André Przywara
2016-08-26 22:18 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160726203041.29366-14-maxime.ripard@free-electrons.com \
--to=maxime.ripard@free-electrons.com \
--cc=andre.przywara@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®