From: Paul Burton <paul.burton@imgtec.com>
To: <linux-mips@linux-mips.org>, Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>,
Paolo Bonzini <pbonzini@redhat.com>,
<linux-kernel@vger.kernel.org>,
James Hogan <james.hogan@imgtec.com>
Subject: [PATCH v2 20/26] MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0
Date: Tue, 30 Aug 2016 18:29:23 +0100 [thread overview]
Message-ID: <20160830172929.16948-21-paul.burton@imgtec.com> (raw)
In-Reply-To: <20160830172929.16948-1-paul.burton@imgtec.com>
On MIPS64 we define the default CAC_BASE as one of the xkphys regions of
the virtual address space. Since the CCA is encoded in bits 61:59 of
xkphys addresses, fixing CAC_BASE to any particular one prevents us from
dynamically changing the CCA as we do for MIPS32 where CAC_BASE is
placed within kseg0. In order to make the kernel more generic, drop the
current kludge that gives CAC_BASE CCA=3 if CONFIG_DMA_NONCOHERENT is
selected (disregarding CONFIG_DMA_MAYBE_COHERENT) & CCA=5 (which is not
standardised by the architecture) otherwise. Instead read Config.K0 and
generate the appropriate offset into xkphys, presuming that either the
bootloader or early kernel code will have configured Config.K0
appropriately. This seems like the best option for a generic
implementation.
The ip27 spaces.h is adjusted to set its former value of CAC_BASE, since
it's the only user of CAC_BASE from assembly (in its smp_slave_setup
macro). This allows the generic case to focus solely on C code without
breaking ip27.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/include/asm/addrspace.h | 3 +--
arch/mips/include/asm/mach-generic/spaces.h | 8 +++-----
arch/mips/include/asm/mach-ip27/spaces.h | 1 +
3 files changed, 5 insertions(+), 7 deletions(-)
diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h
index c5b04e7..4856adc 100644
--- a/arch/mips/include/asm/addrspace.h
+++ b/arch/mips/include/asm/addrspace.h
@@ -126,8 +126,7 @@
#define PHYS_TO_XKSEG_UNCACHED(p) PHYS_TO_XKPHYS(K_CALG_UNCACHED, (p))
#define PHYS_TO_XKSEG_CACHED(p) PHYS_TO_XKPHYS(K_CALG_COH_SHAREABLE, (p))
#define XKPHYS_TO_PHYS(p) ((p) & TO_PHYS_MASK)
-#define PHYS_TO_XKPHYS(cm, a) (_CONST64_(0x8000000000000000) | \
- (_CONST64_(cm) << 59) | (a))
+#define PHYS_TO_XKPHYS(cm, a) (XKPHYS | (_ACAST64_(cm) << 59) | (a))
/*
* The ultimate limited of the 64-bit MIPS architecture: 2 bits for selecting
diff --git a/arch/mips/include/asm/mach-generic/spaces.h b/arch/mips/include/asm/mach-generic/spaces.h
index afc96ec..952b0fd 100644
--- a/arch/mips/include/asm/mach-generic/spaces.h
+++ b/arch/mips/include/asm/mach-generic/spaces.h
@@ -12,6 +12,8 @@
#include <linux/const.h>
+#include <asm/mipsregs.h>
+
/*
* This gives the physical RAM offset.
*/
@@ -52,11 +54,7 @@
#ifdef CONFIG_64BIT
#ifndef CAC_BASE
-#ifdef CONFIG_DMA_NONCOHERENT
-#define CAC_BASE _AC(0x9800000000000000, UL)
-#else
-#define CAC_BASE _AC(0xa800000000000000, UL)
-#endif
+#define CAC_BASE PHYS_TO_XKPHYS(read_c0_config() & CONF_CM_CMASK, 0)
#endif
#ifndef IO_BASE
diff --git a/arch/mips/include/asm/mach-ip27/spaces.h b/arch/mips/include/asm/mach-ip27/spaces.h
index b18802a..4775a11 100644
--- a/arch/mips/include/asm/mach-ip27/spaces.h
+++ b/arch/mips/include/asm/mach-ip27/spaces.h
@@ -19,6 +19,7 @@
#define IO_BASE 0x9200000000000000
#define MSPEC_BASE 0x9400000000000000
#define UNCAC_BASE 0x9600000000000000
+#define CAC_BASE 0xa800000000000000
#define TO_MSPEC(x) (MSPEC_BASE | ((x) & TO_PHYS_MASK))
#define TO_HSPEC(x) (HSPEC_BASE | ((x) & TO_PHYS_MASK))
--
2.9.3
next prev parent reply other threads:[~2016-08-30 17:35 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-30 17:29 [PATCH v2 00/26] MIPS generic kernels, SEAD-3 & Boston support Paul Burton
2016-08-30 17:29 ` [PATCH v2 01/26] MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC Paul Burton
2016-08-30 17:29 ` [PATCH v2 02/26] MIPS: PCI: Make pcibios_set_cache_line_size an initcall Paul Burton
2016-08-30 17:29 ` [PATCH v2 03/26] MIPS: PCI: Inline pcibios_assign_all_busses Paul Burton
2016-08-30 17:29 ` [PATCH v2 04/26] MIPS: PCI: Split pci.c into pci.c & pci-legacy.c Paul Burton
2016-08-30 17:29 ` [PATCH v2 05/26] MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY Paul Burton
2016-08-30 17:29 ` [PATCH v2 06/26] MIPS: PCI: Support generic drivers Paul Burton
2016-08-30 17:29 ` [PATCH v2 07/26] MIPS: Sanitise coherentio semantics Paul Burton
2016-08-30 17:29 ` [PATCH v2 08/26] MIPS: dma-default: Don't check hw_coherentio if device is non-coherent Paul Burton
2016-08-30 17:29 ` [PATCH v2 09/26] MIPS: Support per-device DMA coherence Paul Burton
2016-08-30 17:29 ` [PATCH v2 10/26] MIPS: Print CM error reports upon bus errors Paul Burton
2016-08-30 17:29 ` [PATCH v2 11/26] dt-bindings: Document mti,mips-cpc binding Paul Burton
2016-08-30 17:29 ` [PATCH v2 12/26] MIPS: CPC: Provide a default mips_cpc_default_phys_base Paul Burton
2016-08-31 10:21 ` Sergei Shtylyov
2016-08-30 17:29 ` [PATCH v2 13/26] dt-bindings: Document mti,mips-cdmm binding Paul Burton
2016-08-30 17:29 ` [PATCH v2 14/26] MIPS: CDMM: Allow CDMM base address to be specified via DT Paul Burton
2016-08-30 17:29 ` [PATCH v2 15/26] irqchip: mips-cpu: Replace magic 0x100 with IE_SW0 Paul Burton
2016-08-30 17:29 ` [PATCH v2 16/26] irqchip: mips-cpu: Prepare for non-legacy IRQ domains Paul Burton
2016-08-30 17:29 ` [PATCH v2 17/26] irqchip: mips-cpu: Introduce IPI IRQ domain support Paul Burton
2016-09-01 19:46 ` Jason Cooper
2016-08-30 17:29 ` [PATCH v2 18/26] MIPS: smp-mt: Use CPU interrupt controller " Paul Burton
2016-08-30 17:29 ` [PATCH v2 19/26] MIPS: Stengthen IPI IRQ domain sanity check Paul Burton
2016-08-30 17:29 ` Paul Burton [this message]
2016-08-30 17:29 ` [PATCH v2 21/26] MIPS: Support generating Flattened Image Trees (.itb) Paul Burton
2016-08-30 17:29 ` [PATCH v2 22/26] MIPS: generic: Introduce generic DT-based board support Paul Burton
2016-08-30 17:29 ` [PATCH v2 23/26] MIPS: generic: Convert SEAD-3 to a generic board Paul Burton
2016-08-30 17:29 ` [PATCH v2 24/26] dt-bindings: Document img,boston-clock binding Paul Burton
2016-08-30 17:29 ` [PATCH v2 25/26] clk: boston: Add a driver for MIPS Boston board clocks Paul Burton
2016-08-30 17:29 ` [PATCH v2 26/26] MIPS: generic: Support MIPS Boston development boards Paul Burton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160830172929.16948-21-paul.burton@imgtec.com \
--to=paul.burton@imgtec.com \
--cc=james.hogan@imgtec.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=pbonzini@redhat.com \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®