mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Paul Burton <paul.burton@imgtec.com>
To: <linux-mips@linux-mips.org>, Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	<linux-kernel@vger.kernel.org>,
	Sergey Ryazanov <ryazanov.s.a@gmail.com>,
	Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v2 02/26] MIPS: PCI: Make pcibios_set_cache_line_size an initcall
Date: Tue, 30 Aug 2016 18:29:05 +0100	[thread overview]
Message-ID: <20160830172929.16948-3-paul.burton@imgtec.com> (raw)
In-Reply-To: <20160830172929.16948-1-paul.burton@imgtec.com>

In preparation for allowing configurations in which pcibios_init is not
included, make pcibios_set_cache_line_size an initcall. arch_initcall is
used such that it runs before the pcibios_init subsys_initcall for
platforms that continue to use it.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---

Changes in v2: None

 arch/mips/pci/pci.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 5207c04..30320a4 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -220,7 +220,7 @@ out:
 	       "Skipping PCI bus scan due to resource conflict\n");
 }
 
-static void __init pcibios_set_cache_line_size(void)
+static int __init pcibios_set_cache_line_size(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 	unsigned int lsize;
@@ -238,14 +238,14 @@ static void __init pcibios_set_cache_line_size(void)
 	pci_dfl_cache_line_size = lsize >> 2;
 
 	pr_debug("PCI: pci_cache_line_size set to %d bytes\n", lsize);
+	return 0;
 }
+arch_initcall(pcibios_set_cache_line_size);
 
 static int __init pcibios_init(void)
 {
 	struct pci_controller *hose;
 
-	pcibios_set_cache_line_size();
-
 	/* Scan all of the recorded PCI controllers.  */
 	list_for_each_entry(hose, &controllers, list)
 		pcibios_scanbus(hose);
-- 
2.9.3

  parent reply	other threads:[~2016-08-30 17:30 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-30 17:29 [PATCH v2 00/26] MIPS generic kernels, SEAD-3 & Boston support Paul Burton
2016-08-30 17:29 ` [PATCH v2 01/26] MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC Paul Burton
2016-08-30 17:29 ` Paul Burton [this message]
2016-08-30 17:29 ` [PATCH v2 03/26] MIPS: PCI: Inline pcibios_assign_all_busses Paul Burton
2016-08-30 17:29 ` [PATCH v2 04/26] MIPS: PCI: Split pci.c into pci.c & pci-legacy.c Paul Burton
2016-08-30 17:29 ` [PATCH v2 05/26] MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY Paul Burton
2016-08-30 17:29 ` [PATCH v2 06/26] MIPS: PCI: Support generic drivers Paul Burton
2016-08-30 17:29 ` [PATCH v2 07/26] MIPS: Sanitise coherentio semantics Paul Burton
2016-08-30 17:29 ` [PATCH v2 08/26] MIPS: dma-default: Don't check hw_coherentio if device is non-coherent Paul Burton
2016-08-30 17:29 ` [PATCH v2 09/26] MIPS: Support per-device DMA coherence Paul Burton
2016-08-30 17:29 ` [PATCH v2 10/26] MIPS: Print CM error reports upon bus errors Paul Burton
2016-08-30 17:29 ` [PATCH v2 11/26] dt-bindings: Document mti,mips-cpc binding Paul Burton
2016-08-30 17:29 ` [PATCH v2 12/26] MIPS: CPC: Provide a default mips_cpc_default_phys_base Paul Burton
2016-08-31 10:21   ` Sergei Shtylyov
2016-08-30 17:29 ` [PATCH v2 13/26] dt-bindings: Document mti,mips-cdmm binding Paul Burton
2016-08-30 17:29 ` [PATCH v2 14/26] MIPS: CDMM: Allow CDMM base address to be specified via DT Paul Burton
2016-08-30 17:29 ` [PATCH v2 15/26] irqchip: mips-cpu: Replace magic 0x100 with IE_SW0 Paul Burton
2016-08-30 17:29 ` [PATCH v2 16/26] irqchip: mips-cpu: Prepare for non-legacy IRQ domains Paul Burton
2016-08-30 17:29 ` [PATCH v2 17/26] irqchip: mips-cpu: Introduce IPI IRQ domain support Paul Burton
2016-09-01 19:46   ` Jason Cooper
2016-08-30 17:29 ` [PATCH v2 18/26] MIPS: smp-mt: Use CPU interrupt controller " Paul Burton
2016-08-30 17:29 ` [PATCH v2 19/26] MIPS: Stengthen IPI IRQ domain sanity check Paul Burton
2016-08-30 17:29 ` [PATCH v2 20/26] MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0 Paul Burton
2016-08-30 17:29 ` [PATCH v2 21/26] MIPS: Support generating Flattened Image Trees (.itb) Paul Burton
2016-08-30 17:29 ` [PATCH v2 22/26] MIPS: generic: Introduce generic DT-based board support Paul Burton
2016-08-30 17:29 ` [PATCH v2 23/26] MIPS: generic: Convert SEAD-3 to a generic board Paul Burton
2016-08-30 17:29 ` [PATCH v2 24/26] dt-bindings: Document img,boston-clock binding Paul Burton
2016-08-30 17:29 ` [PATCH v2 25/26] clk: boston: Add a driver for MIPS Boston board clocks Paul Burton
2016-08-30 17:29 ` [PATCH v2 26/26] MIPS: generic: Support MIPS Boston development boards Paul Burton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160830172929.16948-3-paul.burton@imgtec.com \
    --to=paul.burton@imgtec.com \
    --cc=bhelgaas@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=ralf@linux-mips.org \
    --cc=ryazanov.s.a@gmail.com \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®