From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Oleksij Rempel <linux@rempel-privat.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>,
rtc-linux@googlegroups.com, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] rtc: asm9260: rework locking
Date: Wed, 31 Aug 2016 18:09:40 +0200 [thread overview]
Message-ID: <20160831160940.eb3ip4t3jfrga3lv@piout.net> (raw)
In-Reply-To: <5e6bfec7-d5b6-6311-9cab-76d9aa932408@rempel-privat.de>
On 31/08/2016 at 17:14:27 +0200, Oleksij Rempel wrote :
> Hi
>
> Am 31.08.2016 um 02:18 schrieb Alexandre Belloni:
> > The rtc-asm9260 driver uses a discrete spinlock (wrongly uninitialized).
> > Use the rtc mutex to lock mmio accesses instead.
> >
> > Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> > ---
> > drivers/rtc/rtc-asm9260.c | 16 ++--------------
> > 1 file changed, 2 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/rtc/rtc-asm9260.c b/drivers/rtc/rtc-asm9260.c
> > index 5219916ce11d..812f131da694 100644
> > --- a/drivers/rtc/rtc-asm9260.c
> > +++ b/drivers/rtc/rtc-asm9260.c
> > @@ -112,8 +112,6 @@ struct asm9260_rtc_priv {
> > void __iomem *iobase;
> > struct rtc_device *rtc;
> > struct clk *clk;
> > - /* io lock */
> > - spinlock_t lock;
> > };
> >
> > static irqreturn_t asm9260_rtc_irq(int irq, void *dev_id)
> > @@ -122,11 +120,13 @@ static irqreturn_t asm9260_rtc_irq(int irq, void *dev_id)
> > u32 isr;
> > unsigned long events = 0;
> >
> > + mutex_lock(&priv->rtc->ops_lock);
> > isr = ioread32(priv->iobase + HW_CIIR);
> > if (!isr)
> > return IRQ_NONE;
> >
> > iowrite32(0, priv->iobase + HW_CIIR);
> > + mutex_unlock(&priv->rtc->ops_lock);
>
> This means if we have shared or spurious interrupt we will get a
> deadlock here?
>
True, I'll fix that. I actually got it right at first and then I toyed
with sparse/smatch to see whether it was properly checking the locking.
Seems like my setup was not correct. Thanks for the review !
>
> > events |= RTC_AF | RTC_IRQF;
> >
> > @@ -139,9 +139,7 @@ static int asm9260_rtc_read_time(struct device *dev, struct rtc_time *tm)
> > {
> > struct asm9260_rtc_priv *priv = dev_get_drvdata(dev);
> > u32 ctime0, ctime1, ctime2;
> > - unsigned long irq_flags;
> >
> > - spin_lock_irqsave(&priv->lock, irq_flags);
> > ctime0 = ioread32(priv->iobase + HW_CTIME0);
> > ctime1 = ioread32(priv->iobase + HW_CTIME1);
> > ctime2 = ioread32(priv->iobase + HW_CTIME2);
> > @@ -155,7 +153,6 @@ static int asm9260_rtc_read_time(struct device *dev, struct rtc_time *tm)
> > ctime1 = ioread32(priv->iobase + HW_CTIME1);
> > ctime2 = ioread32(priv->iobase + HW_CTIME2);
> > }
> > - spin_unlock_irqrestore(&priv->lock, irq_flags);
> >
> > tm->tm_sec = (ctime0 >> BM_CTIME0_SEC_S) & BM_CTIME0_SEC_M;
> > tm->tm_min = (ctime0 >> BM_CTIME0_MIN_S) & BM_CTIME0_MIN_M;
> > @@ -174,9 +171,7 @@ static int asm9260_rtc_read_time(struct device *dev, struct rtc_time *tm)
> > static int asm9260_rtc_set_time(struct device *dev, struct rtc_time *tm)
> > {
> > struct asm9260_rtc_priv *priv = dev_get_drvdata(dev);
> > - unsigned long irq_flags;
> >
> > - spin_lock_irqsave(&priv->lock, irq_flags);
> > /*
> > * make sure SEC counter will not flip other counter on write time,
> > * real value will be written at the enf of sequence.
> > @@ -191,7 +186,6 @@ static int asm9260_rtc_set_time(struct device *dev, struct rtc_time *tm)
> > iowrite32(tm->tm_hour, priv->iobase + HW_HOUR);
> > iowrite32(tm->tm_min, priv->iobase + HW_MIN);
> > iowrite32(tm->tm_sec, priv->iobase + HW_SEC);
> > - spin_unlock_irqrestore(&priv->lock, irq_flags);
> >
> > return 0;
> > }
> > @@ -199,9 +193,7 @@ static int asm9260_rtc_set_time(struct device *dev, struct rtc_time *tm)
> > static int asm9260_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> > {
> > struct asm9260_rtc_priv *priv = dev_get_drvdata(dev);
> > - unsigned long irq_flags;
> >
> > - spin_lock_irqsave(&priv->lock, irq_flags);
> > alrm->time.tm_year = ioread32(priv->iobase + HW_ALYEAR);
> > alrm->time.tm_mon = ioread32(priv->iobase + HW_ALMON);
> > alrm->time.tm_mday = ioread32(priv->iobase + HW_ALDOM);
> > @@ -213,7 +205,6 @@ static int asm9260_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> >
> > alrm->enabled = ioread32(priv->iobase + HW_AMR) ? 1 : 0;
> > alrm->pending = ioread32(priv->iobase + HW_CIIR) ? 1 : 0;
> > - spin_unlock_irqrestore(&priv->lock, irq_flags);
> >
> > return rtc_valid_tm(&alrm->time);
> > }
> > @@ -221,9 +212,7 @@ static int asm9260_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> > static int asm9260_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> > {
> > struct asm9260_rtc_priv *priv = dev_get_drvdata(dev);
> > - unsigned long irq_flags;
> >
> > - spin_lock_irqsave(&priv->lock, irq_flags);
> > iowrite32(alrm->time.tm_year, priv->iobase + HW_ALYEAR);
> > iowrite32(alrm->time.tm_mon, priv->iobase + HW_ALMON);
> > iowrite32(alrm->time.tm_mday, priv->iobase + HW_ALDOM);
> > @@ -234,7 +223,6 @@ static int asm9260_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> > iowrite32(alrm->time.tm_sec, priv->iobase + HW_ALSEC);
> >
> > iowrite32(alrm->enabled ? 0 : BM_AMR_OFF, priv->iobase + HW_AMR);
> > - spin_unlock_irqrestore(&priv->lock, irq_flags);
> >
> > return 0;
> > }
> >
>
>
> --
> Regards,
> Oleksij
>
--
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
prev parent reply other threads:[~2016-08-31 16:09 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-31 0:18 [PATCH 1/2] rtc: asm9260: allow COMPILE_TEST Alexandre Belloni
2016-08-31 0:18 ` [PATCH 2/2] rtc: asm9260: rework locking Alexandre Belloni
2016-08-31 15:14 ` Oleksij Rempel
2016-08-31 16:09 ` Alexandre Belloni [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160831160940.eb3ip4t3jfrga3lv@piout.net \
--to=alexandre.belloni@free-electrons.com \
--cc=a.zummo@towertech.it \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@rempel-privat.de \
--cc=rtc-linux@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®