From: Axel Haslam <ahaslam@baylibre.com>
To: gregkh@linuxfoundation.org, nsekhar@ti.com, khilman@baylibre.com,
david@lechnology.com
Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
Axel Haslam <ahaslam@baylibre.com>
Subject: [PATCH v6 3/5] USB: ohci: da8xx: Allow a regulator to handle VBUS
Date: Mon, 21 Nov 2016 17:30:12 +0100 [thread overview]
Message-ID: <20161121163014.28008-4-ahaslam@baylibre.com> (raw)
In-Reply-To: <20161121163014.28008-1-ahaslam@baylibre.com>
Using a regulator to handle VBUS will eliminate the need for
platform data and callbacks, and make the driver more generic
allowing different types of regulators to handle VBUS.
The regulator equivalents to the platform callbacks are:
set_power -> regulator_enable/regulator_disable
get_power -> regulator_is_enabled
get_oci -> regulator_get_error_flags
ocic_notify -> regulator event notification
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
drivers/usb/host/ohci-da8xx.c | 97 +++++++++++++++++++++++++++++++++++++++++--
1 file changed, 94 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index 90763ad..d0eb754 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -20,6 +20,7 @@
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
#include <linux/platform_data/usb-davinci.h>
+#include <linux/regulator/consumer.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <asm/unaligned.h>
@@ -36,8 +37,12 @@ static int (*orig_ohci_hub_control)(struct usb_hcd *hcd, u16 typeReq,
static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf);
struct da8xx_ohci_hcd {
+ struct usb_hcd *hcd;
struct clk *usb11_clk;
struct phy *usb11_phy;
+ struct regulator *vbus_reg;
+ struct notifier_block nb;
+ unsigned int reg_enabled;
};
#define to_da8xx_ohci(hcd) (struct da8xx_ohci_hcd *)(hcd_to_ohci(hcd)->priv)
@@ -83,56 +88,103 @@ static void ohci_da8xx_disable(struct usb_hcd *hcd)
static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on)
{
+ struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
+ int ret;
if (hub && hub->set_power)
return hub->set_power(1, on);
+ if (!da8xx_ohci->vbus_reg)
+ return 0;
+
+ if (on && !da8xx_ohci->reg_enabled) {
+ ret = regulator_enable(da8xx_ohci->vbus_reg);
+ if (ret) {
+ dev_err(dev, "Failed to enable regulator: %d\n", ret);
+ return ret;
+ }
+ da8xx_ohci->reg_enabled = 1;
+
+ } else if (!on && da8xx_ohci->reg_enabled) {
+ ret = regulator_disable(da8xx_ohci->vbus_reg);
+ if (ret) {
+ dev_err(dev, "Failed to disable regulator: %d\n", ret);
+ return ret;
+ }
+ da8xx_ohci->reg_enabled = 0;
+ }
+
return 0;
}
static int ohci_da8xx_get_power(struct usb_hcd *hcd)
{
+ struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
if (hub && hub->get_power)
return hub->get_power(1);
+ if (da8xx_ohci->vbus_reg)
+ return regulator_is_enabled(da8xx_ohci->vbus_reg);
+
return 1;
}
static int ohci_da8xx_get_oci(struct usb_hcd *hcd)
{
+ struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
+ unsigned int flags;
+ int ret;
if (hub && hub->get_oci)
return hub->get_oci(1);
+ if (!da8xx_ohci->vbus_reg)
+ return 0;
+
+ ret = regulator_get_error_flags(da8xx_ohci->vbus_reg, &flags);
+ if (ret)
+ return ret;
+
+ if (flags & REGULATOR_ERROR_OVER_CURRENT)
+ return 1;
+
return 0;
}
static int ohci_da8xx_has_set_power(struct usb_hcd *hcd)
{
+ struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
if (hub && hub->set_power)
return 1;
+ if (da8xx_ohci->vbus_reg)
+ return 1;
+
return 0;
}
static int ohci_da8xx_has_oci(struct usb_hcd *hcd)
{
+ struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
if (hub && hub->get_oci)
return 1;
+ if (da8xx_ohci->vbus_reg)
+ return 1;
+
return 0;
}
@@ -160,15 +212,41 @@ static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub,
hub->set_power(port, 0);
}
+static int ohci_da8xx_regulator_event(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct da8xx_ohci_hcd *da8xx_ohci =
+ container_of(nb, struct da8xx_ohci_hcd, nb);
+ struct device *dev = da8xx_ohci->hcd->self.controller;
+
+ if (event & REGULATOR_EVENT_OVER_CURRENT) {
+ dev_warn(dev, "over current event\n");
+ ocic_mask |= 1;
+ ohci_da8xx_set_power(da8xx_ohci->hcd, 0);
+ }
+
+ return 0;
+}
+
static int ohci_da8xx_register_notify(struct usb_hcd *hcd)
{
+ struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
+ int ret = 0;
+
+ if (hub && hub->ocic_notify) {
+ ret = hub->ocic_notify(ohci_da8xx_ocic_handler);
+ } else if (da8xx_ohci->vbus_reg) {
+ da8xx_ohci->nb.notifier_call = ohci_da8xx_regulator_event;
+ ret = devm_regulator_register_notifier(da8xx_ohci->vbus_reg,
+ &da8xx_ohci->nb);
+ }
- if (hub && hub->ocic_notify)
- return hub->ocic_notify(ohci_da8xx_ocic_handler);
+ if (ret)
+ dev_err(dev, "Failed to register notifier: %d\n", ret);
- return 0;
+ return ret;
}
static void ohci_da8xx_unregister_notify(struct usb_hcd *hcd)
@@ -331,6 +409,7 @@ static int ohci_da8xx_probe(struct platform_device *pdev)
return -ENOMEM;
da8xx_ohci = to_da8xx_ohci(hcd);
+ da8xx_ohci->hcd = hcd;
da8xx_ohci->usb11_clk = devm_clk_get(&pdev->dev, "usb11");
if (IS_ERR(da8xx_ohci->usb11_clk)) {
@@ -348,6 +427,18 @@ static int ohci_da8xx_probe(struct platform_device *pdev)
goto err;
}
+ da8xx_ohci->vbus_reg = devm_regulator_get_optional(&pdev->dev, "vbus");
+ if (IS_ERR(da8xx_ohci->vbus_reg)) {
+ error = PTR_ERR(da8xx_ohci->vbus_reg);
+ if (error == -ENODEV) {
+ da8xx_ohci->vbus_reg = NULL;
+ } else {
+ dev_err(&pdev->dev,
+ "Failed to get regulator\n");
+ goto err;
+ }
+ }
+
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hcd->regs = devm_ioremap_resource(&pdev->dev, mem);
if (IS_ERR(hcd->regs)) {
--
2.9.3
next prev parent reply other threads:[~2016-11-21 16:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-21 16:30 [PATCH v6 0/5] USB: ohci-da8xx: Add device tree support Axel Haslam
2016-11-21 16:30 ` [PATCH v6 1/5] USB: ohci: da8xx: use ohci priv data instead of globals Axel Haslam
2016-11-22 20:46 ` David Lechner
2016-11-21 16:30 ` [PATCH v6 2/5] USB: ohci: da8xx: Add wrappers for platform callbacks Axel Haslam
2016-11-21 16:30 ` Axel Haslam [this message]
2016-11-22 20:37 ` [PATCH v6 3/5] USB: ohci: da8xx: Allow a regulator to handle VBUS David Lechner
2016-11-22 20:46 ` Axel Haslam
2016-11-22 20:58 ` David Lechner
2016-11-21 16:30 ` [PATCH v6 4/5] USB: ohci: da8xx: Add devicetree bindings Axel Haslam
2016-11-21 16:30 ` [PATCH v6 5/5] USB: ohci: da8xx: Allow probing from DT Axel Haslam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161121163014.28008-4-ahaslam@baylibre.com \
--to=ahaslam@baylibre.com \
--cc=david@lechnology.com \
--cc=gregkh@linuxfoundation.org \
--cc=khilman@baylibre.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=nsekhar@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome