From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
To: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>,
Vince Weaver <vincent.weaver@maine.edu>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Ingo Molnar <mingo@redhat.com>,
Arnaldo Carvalho de Melo <acme@kernel.org>,
"dvyukov@google.com" <dvyukov@google.com>,
pmladek@suse.com
Subject: Re: perf: fuzzer BUG: KASAN: stack-out-of-bounds in __unwind_start
Date: Tue, 29 Nov 2016 09:36:00 -0800 [thread overview]
Message-ID: <20161129173600.GW3924@linux.vnet.ibm.com> (raw)
In-Reply-To: <20161129171725.dql7evlzqiit63a3@treble>
On Tue, Nov 29, 2016 at 11:17:25AM -0600, Josh Poimboeuf wrote:
> On Tue, Nov 29, 2016 at 08:51:52AM -0800, Paul E. McKenney wrote:
> > On Tue, Nov 29, 2016 at 09:09:17AM -0600, Josh Poimboeuf wrote:
> > > On Tue, Nov 29, 2016 at 06:07:34AM -0800, Paul E. McKenney wrote:
> > > > On Tue, Nov 29, 2016 at 10:16:50AM +0100, Peter Zijlstra wrote:
> > > > > On Mon, Nov 28, 2016 at 11:52:41PM -0600, Josh Poimboeuf wrote:
> > > > > > > We used to do that, but the resulting NMIs were problematic on some
> > > > > > > platforms. Perhaps things have gotten better?
> > > > > >
> > > > > > Did a little digging on git blame and found the following commit (which
> > > > > > seems to be the cause of the KASAN warning and missing stack dump):
> > > > > >
> > > > > > bc1dce514e9b ("rcu: Don't use NMIs to dump other CPUs' stacks")
> > > > > >
> > > > > > I presume this commit is still needed because of the NMI printk deadlock
> > > > > > issues which were discussed at Kernel Summit. I guess those issues need
> > > > > > to be sorted out before the above commit can be reverted.
> > > > >
> > > > > so printk should more or less work from NMI, esp. after:
> > > > >
> > > > > 42a0bb3f7138 ("printk/nmi: generic solution for safe printk in NMI")
> > > >
> > > > And of course bc1dce514e9b doesn't revert cleanly, but see hand reversion
> > > > below. Also, 42a0bb3f7138's commit log calls out MN10300 and Xtensa as
> > > > needing more work. Has that happened?
> > >
> > > Petr M, any idea?
> >
> > My Not-yet-signed-off-by is due to this concern, FWIW.
>
> I think Petr's replies have addressed that now.
>
> > > > But I really like the fact that RCU CPU stall warnings dump only those
> > > > stacks that are likely to be involved, and the patch below goes back
> > > > to dumping everyone. Shouldn't be that hard to fix, though...
> > >
> > > There's a new trigger_single_cpu_backtrace() function which can be used
> > > for that.
> >
> > Even better, thank you! Killed an hour or so of coding, but I must
> > confess that it was a mercy killing. ;-)
>
> Ha :-)
>
> > Much nicer (but completely untested) patch below.
>
> The kernel/rcu/tree.h changes seem intended for another patch?
Indeed it was, thank you for catching this, fixed.
> Otherwise:
>
> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
>
> Also I think this will fix the KASAN warnings reported by Vince, so you
> might add:
>
> Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Added both of these, thank you!
Updated (but still untested) commit below.
Thanx, Paul
------------------------------------------------------------------------
commit d3df9bc5fb5d838b049f32a476721eadbc349553
Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Date: Tue Nov 29 05:49:06 2016 -0800
rcu: Once again use NMI-based stack traces in stall warnings
This commit is for all intents and purposes a revert of bc1dce514e9b
("rcu: Don't use NMIs to dump other CPUs' stacks"). The reason to suppose
that this can now safely be reverted is the presence of 42a0bb3f7138
("printk/nmi: generic solution for safe printk in NMI"), which is said
to have made NMI-based stack dumps safe.
However, this reversion keeps one nice property of bc1dce514e9b
("rcu: Don't use NMIs to dump other CPUs' stacks"), namely that
only those CPUs blocking the grace period are dumped. The new
trigger_single_cpu_backtrace() is used to make this happen, as
suggested by Josh Poimboeuf.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Not-yet-signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index 91a68e4e6671..ba0e4825be9d 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -1396,7 +1396,10 @@ static void rcu_check_gp_kthread_starvation(struct rcu_state *rsp)
}
/*
- * Dump stacks of all tasks running on stalled CPUs.
+ * Dump stacks of all tasks running on stalled CPUs. First try using
+ * NMIs, but fall back to manual remote stack tracing on architectures
+ * that don't support NMI-based stack dumps. The NMI-triggered stack
+ * traces are more accurate because they are printed by the target CPU.
*/
static void rcu_dump_cpu_stacks(struct rcu_state *rsp)
{
@@ -1406,11 +1409,10 @@ static void rcu_dump_cpu_stacks(struct rcu_state *rsp)
rcu_for_each_leaf_node(rsp, rnp) {
raw_spin_lock_irqsave_rcu_node(rnp, flags);
- if (rnp->qsmask != 0) {
- for_each_leaf_node_possible_cpu(rnp, cpu)
- if (rnp->qsmask & leaf_node_cpu_bit(rnp, cpu))
+ for_each_leaf_node_possible_cpu(rnp, cpu)
+ if (rnp->qsmask & leaf_node_cpu_bit(rnp, cpu))
+ if (!trigger_single_cpu_backtrace(cpu))
dump_cpu_task(cpu);
- }
raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
}
}
next prev parent reply other threads:[~2016-11-29 17:36 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-24 17:33 Vince Weaver
2016-11-28 21:54 ` Josh Poimboeuf
2016-11-29 0:40 ` Paul E. McKenney
2016-11-29 5:52 ` Josh Poimboeuf
2016-11-29 9:16 ` Peter Zijlstra
2016-11-29 14:07 ` Paul E. McKenney
2016-11-29 15:09 ` Josh Poimboeuf
2016-11-29 16:12 ` Petr Mladek
2016-11-29 18:01 ` Paul E. McKenney
2016-11-29 16:51 ` Paul E. McKenney
2016-11-29 17:17 ` Josh Poimboeuf
2016-11-29 17:36 ` Paul E. McKenney [this message]
2016-11-30 9:29 ` Petr Mladek
2016-11-29 10:28 ` Paul E. McKenney
2016-11-29 12:43 ` Peter Zijlstra
2016-11-29 15:10 ` Paul E. McKenney
2016-11-29 16:29 ` Petr Mladek
2016-11-29 17:10 ` Peter Zijlstra
2016-11-29 19:39 ` Paul E. McKenney
2016-11-29 19:52 ` Peter Zijlstra
2016-11-29 20:07 ` Paul E. McKenney
2016-11-29 20:32 ` Paul E. McKenney
2016-11-30 19:13 ` Josh Poimboeuf
2016-11-30 19:49 ` Paul E. McKenney
2016-12-01 5:52 ` Peter Zijlstra
2016-12-01 12:33 ` Paul E. McKenney
2016-12-01 16:41 ` Peter Zijlstra
2016-12-01 17:00 ` Paul E. McKenney
2016-11-30 10:01 ` Petr Mladek
2016-11-30 11:06 ` Peter Zijlstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161129173600.GW3924@linux.vnet.ibm.com \
--to=paulmck@linux.vnet.ibm.com \
--cc=acme@kernel.org \
--cc=dvyukov@google.com \
--cc=jpoimboe@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
--cc=pmladek@suse.com \
--cc=vincent.weaver@maine.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome