Re: [PATCH 1/4] rtc: mcp795: fix invalid month setting.

[Alexandre Belloni <alexandre.belloni@free-electrons.com>]

Hi,

On 05/12/2016 at 14:11:50 +0100, Emil Bartczak wrote :
> The 10 month register was always set to value 0 in the RTC hardware.
> Due to the bug month November or December became February.

All your patches are missing your SoB, see Developer's Certificate of
Origin 1.1 in Documentation/SubmittingPatches

> ---
>  drivers/rtc/rtc-mcp795.c | 12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/rtc/rtc-mcp795.c b/drivers/rtc/rtc-mcp795.c
> index 4021fd0..266328b 100644
> --- a/drivers/rtc/rtc-mcp795.c
> +++ b/drivers/rtc/rtc-mcp795.c
> @@ -29,7 +29,7 @@
>  #define MCP795_EEWREN	0x06
>  #define MCP795_SRREAD	0x05
>  #define MCP795_SRWRITE	0x01
> -#define MCP795_READ		0x13
> +#define MCP795_READ	0x13

Unrelated change

>  #define MCP795_WRITE	0x12
>  #define MCP795_UNLOCK	0x14
>  #define MCP795_IDWRITE	0x32
> @@ -39,6 +39,7 @@
>  
>  #define MCP795_ST_BIT	0x80
>  #define MCP795_24_BIT	0x40
> +#define MCP795_LP_BIT	0x20
>  
>  static int mcp795_rtcc_read(struct device *dev, u8 addr, u8 *buf, u8 count)
>  {
> @@ -108,7 +109,8 @@ static int mcp795_set_time(struct device *dev, struct rtc_time *tim)
>  	data[1] = (data[1] & 0x80) | ((tim->tm_min / 10) << 4) | (tim->tm_min % 10);
>  	data[2] = ((tim->tm_hour / 10) << 4) | (tim->tm_hour % 10);
>  	data[4] = ((tim->tm_mday / 10) << 4) | ((tim->tm_mday) % 10);
> -	data[5] = (data[5] & 0x10) | (tim->tm_mon / 10) | (tim->tm_mon % 10);
> +	data[5] = (data[5] & MCP795_LP_BIT) |

You changed 0x10 in MCP795_LP_BIT which you defined as 0x20, is that
right?

This is also an unrelated change.

> +			((tim->tm_mon / 10) << 4) | (tim->tm_mon % 10);
>  
>  	if (tim->tm_year > 100)
>  		tim->tm_year -= 100;
> @@ -137,11 +139,11 @@ static int mcp795_read_time(struct device *dev, struct rtc_time *tim)
>  	if (ret)
>  		return ret;
>  
> -	tim->tm_sec		= ((data[0] & 0x70) >> 4) * 10 + (data[0] & 0x0f);
> -	tim->tm_min		= ((data[1] & 0x70) >> 4) * 10 + (data[1] & 0x0f);
> +	tim->tm_sec	= ((data[0] & 0x70) >> 4) * 10 + (data[0] & 0x0f);
> +	tim->tm_min	= ((data[1] & 0x70) >> 4) * 10 + (data[1] & 0x0f);
>  	tim->tm_hour	= ((data[2] & 0x30) >> 4) * 10 + (data[2] & 0x0f);
>  	tim->tm_mday	= ((data[4] & 0x30) >> 4) * 10 + (data[4] & 0x0f);
> -	tim->tm_mon		= ((data[5] & 0x10) >> 4) * 10 + (data[5] & 0x0f);
> +	tim->tm_mon	= ((data[5] & 0x10) >> 4) * 10 + (data[5] & 0x0f);

All those whitespace changes are actually confusing. Please do them in a
separate patch or in your last patch.

>  	tim->tm_year	= ((data[6] & 0xf0) >> 4) * 10 + (data[6] & 0x0f) + 100; /* Assume we are in 20xx */
>  
>  	dev_dbg(dev, "Read from mcp795: %04d-%02d-%02d %02d:%02d:%02d\n",
> -- 
> 2.7.4
> 

-- 
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com