* Re: [PATCH] HID: sony: Add touchpad support for Sony's NSG-MR5U and NSG-MR7U remotes
[not found] ` <20170201085358.GE31658@mail.corp.redhat.com>
@ 2017-02-01 8:56 ` Benjamin Tissoires
0 siblings, 0 replies; only message in thread
From: Benjamin Tissoires @ 2017-02-01 8:56 UTC (permalink / raw)
To: Todd K; +Cc: Jiri Kosina, linux-input, linux-kernel
On Feb 01 2017 or thereabouts, Benjamin Tissoires wrote:
> On Jan 30 2017 or thereabouts, Todd K wrote:
> > On Mon, Jan 30, 2017 at 10:56:18AM +0100, Benjamin Tissoires wrote:
> > > Hi,
> > >
> > > On Jan 27 2017 or thereabouts, Todd Kelner wrote:
> > > > Sony's NSG-MR5U and NSG-MR7U remote controls have a full keyboard and a
> > > > touchpad. The keyboard is already supported by the existing Linux kernel
> > > > and drivers but the touchpad is not recognized. This patch adds the code
> > > > needed to bring full functionality to the touchpad.
> > > >
> > > > Note that these remotes use the vendor code for SMK even though they are
> > > > Sony branded.
> > > >
> > >
> > > Thanks for the patch. There are some changes I'd like to be in before we
> > > merge it. Please see inline.
> > >
> > > > Signed-off-by: Todd Kelner <tsopdump@gmail.com>
> > > > ---
> > > > drivers/hid/hid-core.c | 2 +
> > > > drivers/hid/hid-ids.h | 2 +
> > > > drivers/hid/hid-sony.c | 124 +++++++++++++++++++++++++++++++++++++++++++++----
> > > > 3 files changed, 118 insertions(+), 10 deletions(-)
> > > >
> > > > diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
> > > > index cff060b..4dfef41 100644
> > > > --- a/drivers/hid/hid-core.c
> > > > +++ b/drivers/hid/hid-core.c
> > > > @@ -2054,6 +2054,8 @@ static const struct hid_device_id hid_have_special_driver[] = {
> > > > { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE) },
> > > > { HID_USB_DEVICE(USB_VENDOR_ID_SKYCABLE, USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER) },
> > > > { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SMK, USB_DEVICE_ID_SMK_PS3_BDREMOTE) },
> > > > + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SMK, USB_DEVICE_ID_SMK_NSG_MR5U_REMOTE) },
> > > > + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SMK, USB_DEVICE_ID_SMK_NSG_MR7U_REMOTE) },
> > > > { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_BUZZ_CONTROLLER) },
> > > > { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_WIRELESS_BUZZ_CONTROLLER) },
> > > > { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_MOTION_CONTROLLER) },
> > > > diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
> > > > index 54bd22d..864ec34 100644
> > > > --- a/drivers/hid/hid-ids.h
> > > > +++ b/drivers/hid/hid-ids.h
> > > > @@ -904,6 +904,8 @@
> > > >
> > > > #define USB_VENDOR_ID_SMK 0x0609
> > > > #define USB_DEVICE_ID_SMK_PS3_BDREMOTE 0x0306
> > > > +#define USB_DEVICE_ID_SMK_NSG_MR5U_REMOTE 0x0368
> > > > +#define USB_DEVICE_ID_SMK_NSG_MR7U_REMOTE 0x0369
> > > >
> > > > #define USB_VENDOR_ID_SONY 0x054c
> > > > #define USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE 0x024b
> > > > diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
> > > > index f405b07..e6a8ef2 100644
> > > > --- a/drivers/hid/hid-sony.c
> > > > +++ b/drivers/hid/hid-sony.c
> > > > @@ -54,6 +54,8 @@
> > > > #define NAVIGATION_CONTROLLER_BT BIT(10)
> > > > #define SINO_LITE_CONTROLLER BIT(11)
> > > > #define FUTUREMAX_DANCE_MAT BIT(12)
> > > > +#define NSG_MR5U_REMOTE_BT BIT(13)
> > > > +#define NSG_MR7U_REMOTE_BT BIT(14)
> > > >
> > > > #define SIXAXIS_CONTROLLER (SIXAXIS_CONTROLLER_USB | SIXAXIS_CONTROLLER_BT)
> > > > #define MOTION_CONTROLLER (MOTION_CONTROLLER_USB | MOTION_CONTROLLER_BT)
> > > > @@ -70,8 +72,11 @@
> > > > MOTION_CONTROLLER)
> > > > #define SONY_BT_DEVICE (SIXAXIS_CONTROLLER_BT | DUALSHOCK4_CONTROLLER_BT |\
> > > > MOTION_CONTROLLER_BT | NAVIGATION_CONTROLLER_BT)
> > > > +#define NSG_MRXU_REMOTE (NSG_MR5U_REMOTE_BT | NSG_MR7U_REMOTE_BT)
> > > >
> > > > #define MAX_LEDS 4
> > > > +#define NSG_MRXU_MAX_X 1667
> > > > +#define NSG_MRXU_MAX_Y 1868
> > > >
> > > > /*
> > > > * The Sixaxis reports both digital and analog values for each button on the
> > > > @@ -1063,7 +1068,7 @@ struct motion_output_report_02 {
> > > > #define DS4_INPUT_REPORT_BATTERY_OFFSET 30
> > > > #define DS4_INPUT_REPORT_TOUCHPAD_OFFSET 33
> > > >
> > > > -#define DS4_TOUCHPAD_SUFFIX " Touchpad"
> > > > +#define TOUCHPAD_SUFFIX " Touchpad"
> > > >
> > > > static DEFINE_SPINLOCK(sony_dev_list_lock);
> > > > static LIST_HEAD(sony_device_list);
> > > > @@ -1240,6 +1245,10 @@ static u8 *sony_report_fixup(struct hid_device *hdev, u8 *rdesc,
> > > > hid_info(hdev, "Using modified Dualshock 4 Bluetooth report descriptor\n");
> > > > rdesc = dualshock4_bt_rdesc;
> > > > *rsize = sizeof(dualshock4_bt_rdesc);
> > > > + } else if (sc->quirks & NSG_MRXU_REMOTE && *rsize == 359 &&
> > > > + rdesc[358] == 0x00) {
> > > > + hid_info(hdev, "Removing trailing 0x00 from NSG_MRxU report descriptor\n");
> > > > + (*rsize)--;
> > >
> > > I think this is generic for bluetooth HID devices (at least all I have
> > > seen) and should probably be fixed in the hidp implementation directly,
> > > not for each device
> > >
> > I wasn't sure if this might cause a problem. If it is a common
> > occurrence and doesn't cause problems, I'll remove this part of the code.
> >
> > > > }
> > > >
> > > > if (sc->quirks & SIXAXIS_CONTROLLER)
> > > > @@ -1383,6 +1392,70 @@ static void dualshock4_parse_report(struct sony_sc *sc, u8 *rd, int size)
> > > > }
> > > > }
> > > >
> > > > +static void nsg_mrxu_parse_report(struct sony_sc *sc, u8 *rd, int size)
> > > > +{
> > > > + int n, offset;
> > > > + u8 active;
> > > > +
> > > > + /*
> > > > + * The NSG-MRxU multi-touch trackpad data starts at offset 1 and
> > > > + * the touch-related data starts at offset 2.
> > > > + * Bit 0 is set when touchpad button is pressed.
> > > > + * Bit 3 is set when a touch is active and the drag (Fn) key is pressed.
> > > > + * This drag key is mapped to BTN_LEFT.
> > > > + * Bit 4 is set when only the first touch point is active.
> > > > + * Bit 6 is set when only the second touch point is active.
> > > > + * Bits 5 and 7 are set when both touch points are active.
> > > > + * The next 3 bytes are two 12 bit X/Y coordinates for the first touch.
> > > > + * The bytes at offset 7-9 are the second touch X/Y coordinates.
> > > > + */
> > >
> > > Well, it seems weird that the PS would implement a specific raw protocol
> > > for these remotes. Any chances you can not rely on the report
> > > descriptors and use more generic HID processing? (otherwise, any change
> > > in the protocol would require a new implementation, while HID should
> > > mask that).
> > >
> > Sony is using a vendor-specific usage page for its touchpad so that is
> > one of the main reasons why the touchpad isn't natively supported in
> > Linux. There's a similar touchpad on Sony's Dualshock 4 controller and
> > support for it was recently added to hid-sony.c so I was following that
> > as an example. If there's a better way to do this, I'm willing to give
> > it a shot if you can point me in the right direction.
>
> Oh, OK. Then in that case you are following the correct path.
>
> >
> > > > + offset = 1;
> > > > +
> > > > + input_report_key(sc->touchpad, BTN_LEFT, rd[offset] & 0x0F);
> > > > + active = (rd[offset] >> 4);
> > > > +
> > > > + offset++;
> > > > +
> > > > + for (n = 0; n < 2; n++) {
> > > > + u16 x, y;
> > > > + u8 contactx, contacty;
> > > > + unsigned int rel_axis;
> > > > +
> > > > + x = rd[offset] | ((rd[offset+1] & 0x0F) << 8);
> > > > + y = ((rd[offset+1] & 0xF0) >> 4) | (rd[offset+2] << 4);
> > > > +
> > > > + input_mt_slot(sc->touchpad, n);
> > > > + input_mt_report_slot_state(sc->touchpad, MT_TOOL_FINGER, active & 0x03);
> > > > +
> > > > + if (active & 0x03) {
> > > > + contactx = rd[offset+3] & 0x0F;
> > > > + contacty = rd[offset+3] >> 4;
> > > > + input_report_abs(sc->touchpad, ABS_MT_TOUCH_MAJOR,
> > > > + max(contactx, contacty));
> > > > + input_report_abs(sc->touchpad, ABS_MT_TOUCH_MINOR,
> > > > + max(contactx, contacty));
> > > > + input_report_abs(sc->touchpad, ABS_MT_ORIENTATION,
> > > > + (bool) (contactx > contacty));
> > > > + input_report_abs(sc->touchpad, ABS_MT_POSITION_X, x);
> > > > + input_report_abs(sc->touchpad, ABS_MT_POSITION_Y,
> > > > + NSG_MRXU_MAX_Y - y);
> > > > + if (n == 0)
> > > > + rel_axis = REL_X;
> > > > + else
> > > > + rel_axis = REL_Y;
> > > > +
> > > > + input_report_rel(sc->touchpad, rel_axis, rd[offset+4]);
> > > > + }
> > > > +
> > > > + offset += 5;
> > > > + active >>= 2;
> > > > + }
> > > > +
> > > > + input_mt_sync_frame(sc->touchpad);
> > > > +
> > > > + input_sync(sc->touchpad);
> > > > +}
> > > > +
> > > > static int sony_raw_event(struct hid_device *hdev, struct hid_report *report,
> > > > u8 *rd, int size)
> > > > {
> > > > @@ -1459,6 +1532,10 @@ static int sony_raw_event(struct hid_device *hdev, struct hid_report *report,
> > > > }
> > > >
> > > > dualshock4_parse_report(sc, rd, size);
> > > > +
> > > > + } else if (sc->quirks & NSG_MRXU_REMOTE && rd[0] == 0x02) {
> > > > + nsg_mrxu_parse_report(sc, rd, size);
> > > > + return 1;
> > > > }
> > > >
> > > > if (sc->defer_initialization) {
> > > > @@ -1529,30 +1606,37 @@ static int sony_register_touchpad(struct sony_sc *sc, int touch_count,
> > > > sc->touchpad->id.product = sc->hdev->product;
> > > > sc->touchpad->id.version = sc->hdev->version;
> > > >
> > > > - /* Append a suffix to the controller name as there are various
> > > > - * DS4 compatible non-Sony devices with different names.
> > > > - */
> > > > - name_sz = strlen(sc->hdev->name) + sizeof(DS4_TOUCHPAD_SUFFIX);
> > > > + /* Append a suffix to the controller name to make it more unique */
> > > > + name_sz = strlen(sc->hdev->name) + sizeof(TOUCHPAD_SUFFIX);
> > > > name = kzalloc(name_sz, GFP_KERNEL);
> > > > if (!name) {
> > > > ret = -ENOMEM;
> > > > goto err;
> > > > }
> > > > - snprintf(name, name_sz, "%s" DS4_TOUCHPAD_SUFFIX, sc->hdev->name);
> > > > + snprintf(name, name_sz, "%s" TOUCHPAD_SUFFIX, sc->hdev->name);
> > > > sc->touchpad->name = name;
> > > >
> > > > - ret = input_mt_init_slots(sc->touchpad, touch_count, 0);
> > > > - if (ret < 0)
> > > > - goto err;
> > > > -
> > > > /* We map the button underneath the touchpad to BTN_LEFT. */
> > > > __set_bit(EV_KEY, sc->touchpad->evbit);
> > > > __set_bit(BTN_LEFT, sc->touchpad->keybit);
> > > > + __clear_bit(BTN_MIDDLE, sc->touchpad->keybit);
> > > > + __clear_bit(BTN_RIGHT, sc->touchpad->keybit);
> > > > __set_bit(INPUT_PROP_BUTTONPAD, sc->touchpad->propbit);
> > > >
> > > > + if (sc->quirks & NSG_MRXU_REMOTE) {
> > > > + __set_bit(EV_REL, sc->touchpad->evbit);
> > > > + input_set_abs_params(sc->touchpad, ABS_MT_TOUCH_MAJOR, 0, 15, 0, 0);
> > > > + input_set_abs_params(sc->touchpad, ABS_MT_TOUCH_MINOR, 0, 15, 0, 0);
> > > > + input_set_abs_params(sc->touchpad, ABS_MT_ORIENTATION, 0, 1, 0, 0);
> > > > + }
> > > > +
> > > > input_set_abs_params(sc->touchpad, ABS_MT_POSITION_X, 0, w, 0, 0);
> > > > input_set_abs_params(sc->touchpad, ABS_MT_POSITION_Y, 0, h, 0, 0);
> > > >
> > > > + ret = input_mt_init_slots(sc->touchpad, touch_count, INPUT_MT_POINTER);
> > > > + if (ret < 0)
> > > > + goto err;
> > > > +
> > >
> > > Ideally, I'd prefer see this fix for the multitouch protocol in a
> > > separate patch (moving input_mt_init_slot after the initialization of MT
> > > axes).
> > >
> > OK, I'll put this back where it was originally and submit a separate
> > patch to move it so it follows the set bit calls.
> >
> > > > ret = input_register_device(sc->touchpad);
> > > > if (ret < 0)
> > > > goto err;
> > > > @@ -2586,6 +2670,20 @@ static int sony_input_configured(struct hid_device *hdev,
> > > > }
> > > >
> > > > sony_init_output_report(sc, dualshock4_send_output_report);
> > > > + } else if (sc->quirks & NSG_MRXU_REMOTE) {
> > > > + /*
> > > > + * The NSG-MRxU touchpad supports 2 touches and has a
> > > > + * resolution of 1667x1868
> > > > + */
> > > > + ret = sony_register_touchpad(sc, 2,
> > > > + NSG_MRXU_MAX_X, NSG_MRXU_MAX_Y);
> > >
> > > Isn't the resolution part of the report descriptors?
> > >
> > The resolution doesn't appear to be listed in the descriptor. All it
> > lists are the logical min/max, i.e. -2047 to +2047 for both axes.
>
> If the device is following a custom protocol, it makes sense. So no
> worries there.
>
> >
> > > > + if (ret) {
> > > > + hid_err(sc->hdev,
> > > > + "Unable to initialize multi-touch slots: %d\n",
> > > > + ret);
> > > > + goto err_stop;
> > > > + }
> > > > +
> > > > } else if (sc->quirks & MOTION_CONTROLLER) {
> > > > sony_init_output_report(sc, motion_send_output_report);
> > > > } else {
> > > > @@ -2830,6 +2928,12 @@ static const struct hid_device_id sony_devices[] = {
> > > > /* Nyko Core Controller for PS3 */
> > > > { HID_USB_DEVICE(USB_VENDOR_ID_SINO_LITE, USB_DEVICE_ID_SINO_LITE_CONTROLLER),
> > > > .driver_data = SIXAXIS_CONTROLLER_USB | SINO_LITE_CONTROLLER },
> > > > + /* SMK-Link NSG-MR5U Remote Control */
> > > > + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SMK, USB_DEVICE_ID_SMK_NSG_MR5U_REMOTE),
> > > > + .driver_data = NSG_MR5U_REMOTE_BT },
> > > > + /* SMK-Link NSG-MR7U Remote Control */
> > > > + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SMK, USB_DEVICE_ID_SMK_NSG_MR7U_REMOTE),
> > > > + .driver_data = NSG_MR7U_REMOTE_BT },
> > > > { }
> > > > };
> > > > MODULE_DEVICE_TABLE(hid, sony_devices);
> > > > --
> > > > 2.7.4
> > > >
> > >
> > > Cheers,
> > > Benjamin
> > >
> > Thanks for reviewing the patch and sending feedback on it.
> >
> > If you can let me know how/if the touchpad can be handled in a more
> > generic fashion, I'll update my code before sending a new patch.
> >
>
> I don't think you'll be able to fix this without tinkering too much for
> no gain. Please just resubmit with the few other comments, and that
> should be good.
Actually, don't forget to put Jiri in CC of all your emails, and also
linux-input@vger.kernel.org. That's a requirement to be included in the
upstream kernel.
Cheers,
Benjamin
> > Thanks again,
> > Todd
^ permalink raw reply [flat|nested] only message in thread