From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: peppe.cavallaro@st.com, alexandre.torgue@st.com, netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Corentin Labbe <clabbe.montjoie@gmail.com>
Subject: [PATCH v2 00/16] net: stmmac: misc fix
Date: Wed, 8 Feb 2017 09:31:05 +0100 [thread overview]
Message-ID: <20170208083121.27949-1-clabbe.montjoie@gmail.com> (raw)
Hello
I am currently working on dwmac-sun8i glue driver for Allwinner H3/A83T/A64.
This serie is the result of all minor problem found in the stmmac driver.
All patch are tested on cubieboard2 via dwmac-sunxi and on pine64/orangepis via dwmac-sun8i.
Regards
Changes since v1:
- Removed netdev_dbg() in "net: stmmac: print phy information"
- Removed patch "net: stmmac: Implement NAPI for TX", it will be reworked
- Changed error message in "Correct the error message about invalid speed"
- Added some acked-by
Corentin Labbe (16):
net: stmmac: fix the typo on MAC_RNABLE_RX
net: stmmac: Remove the bus_setup function pointer
net: stmmac: fix some typos in comments
net: stmmac: remove freesoftware address
net: stmmac: remplace asm/io.h by linux/io.h
net: stmmac: fix some code style problem
net: stmmac: replace stmmac_mdio_busy_wait by readl_poll_timeout
net: stmmac: Use readl_poll_timeout
net: stmmac: replace ENOSYS by EINVAL
net: stmmac: Correct the error message about invalid speed
net: stmmac: Rewrite two test against NULL value
net: stmmac: rename rx_crc to rx_crc_errors
net: stmmac: print phy information
net: stmmac: remove dead code in stmmac_tx_clean
net: stmmac: remove unused variable in sysfs_display_ring
net: stmmac: replace unsigned by u32
drivers/net/ethernet/stmicro/stmmac/chain_mode.c | 4 --
drivers/net/ethernet/stmicro/stmmac/common.h | 8 +---
drivers/net/ethernet/stmicro/stmmac/descs.h | 4 --
drivers/net/ethernet/stmicro/stmmac/descs_com.h | 4 --
drivers/net/ethernet/stmicro/stmmac/dwmac100.h | 4 --
drivers/net/ethernet/stmicro/stmmac/dwmac1000.h | 4 --
.../net/ethernet/stmicro/stmmac/dwmac1000_core.c | 4 --
.../net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 4 --
.../net/ethernet/stmicro/stmmac/dwmac100_core.c | 4 --
drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c | 4 --
drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c | 2 +-
drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h | 4 --
drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c | 28 +++++-------
drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 6 +--
drivers/net/ethernet/stmicro/stmmac/mmc.h | 4 --
drivers/net/ethernet/stmicro/stmmac/mmc_core.c | 4 --
drivers/net/ethernet/stmicro/stmmac/norm_desc.c | 6 +--
drivers/net/ethernet/stmicro/stmmac/ring_mode.c | 4 --
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 4 --
.../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 6 +--
.../net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c | 4 --
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 49 ++++++--------------
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 52 ++++++++--------------
drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 4 --
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 6 +--
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c | 4 --
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h | 4 --
include/linux/stmmac.h | 1 -
28 files changed, 51 insertions(+), 185 deletions(-)
--
2.10.2
next reply other threads:[~2017-02-08 8:33 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-08 8:31 Corentin Labbe [this message]
2017-02-08 8:31 ` [PATCH v2 01/16] net: stmmac: fix the typo on MAC_RNABLE_RX Corentin Labbe
2017-02-08 8:31 ` [PATCH v2 02/16] net: stmmac: Remove the bus_setup function pointer Corentin Labbe
2017-02-08 13:17 ` Giuseppe CAVALLARO
2017-02-08 8:31 ` [PATCH v2 03/16] net: stmmac: fix some typos in comments Corentin Labbe
2017-02-08 8:31 ` [PATCH v2 04/16] net: stmmac: remove freesoftware address Corentin Labbe
2017-02-08 13:17 ` Giuseppe CAVALLARO
2017-02-08 8:31 ` [PATCH v2 05/16] net: stmmac: remplace asm/io.h by linux/io.h Corentin Labbe
2017-02-08 8:31 ` [PATCH v2 06/16] net: stmmac: fix some code style problem Corentin Labbe
2017-02-08 10:41 ` Joe Perches
2017-02-08 15:06 ` Corentin Labbe
2017-02-08 11:57 ` Sergei Shtylyov
2017-02-08 8:31 ` [PATCH v2 07/16] net: stmmac: replace stmmac_mdio_busy_wait by readl_poll_timeout Corentin Labbe
2017-02-08 8:31 ` [PATCH v2 08/16] net: stmmac: Use readl_poll_timeout Corentin Labbe
2017-02-08 13:18 ` Giuseppe CAVALLARO
2017-02-08 8:31 ` [PATCH v2 09/16] net: stmmac: replace ENOSYS by EINVAL Corentin Labbe
2017-02-08 8:31 ` [PATCH v2 10/16] net: stmmac: Correct the error message about invalid speed Corentin Labbe
2017-02-08 13:18 ` Giuseppe CAVALLARO
2017-02-08 8:31 ` [PATCH v2 11/16] net: stmmac: Rewrite two test against NULL value Corentin Labbe
2017-02-08 8:31 ` [PATCH v2 12/16] net: stmmac: rename rx_crc to rx_crc_errors Corentin Labbe
2017-02-08 8:31 ` [PATCH v2 13/16] net: stmmac: print phy information Corentin Labbe
2017-02-08 13:18 ` Giuseppe CAVALLARO
2017-02-08 8:31 ` [PATCH v2 14/16] net: stmmac: remove dead code in stmmac_tx_clean Corentin Labbe
2017-02-08 8:31 ` [PATCH v2 15/16] net: stmmac: remove unused variable in sysfs_display_ring Corentin Labbe
2017-02-08 8:31 ` [PATCH v2 16/16] net: stmmac: replace unsigned by u32 Corentin Labbe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170208083121.27949-1-clabbe.montjoie@gmail.com \
--to=clabbe.montjoie@gmail.com \
--cc=alexandre.torgue@st.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®