From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: peppe.cavallaro@st.com, alexandre.torgue@st.com, netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Corentin Labbe <clabbe.montjoie@gmail.com>
Subject: [PATCH v2 01/16] net: stmmac: fix the typo on MAC_RNABLE_RX
Date: Wed, 8 Feb 2017 09:31:06 +0100 [thread overview]
Message-ID: <20170208083121.27949-2-clabbe.montjoie@gmail.com> (raw)
In-Reply-To: <20170208083121.27949-1-clabbe.montjoie@gmail.com>
the define MAC_RNABLE_RX have a typo, rename it to MAC_ENABLE_RX
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
---
drivers/net/ethernet/stmicro/stmmac/common.h | 2 +-
drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index 75e2666..262a1c4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -343,7 +343,7 @@ struct dma_features {
/* Common MAC defines */
#define MAC_CTRL_REG 0x00000000 /* MAC Control */
#define MAC_ENABLE_TX 0x00000008 /* Transmitter Enable */
-#define MAC_RNABLE_RX 0x00000004 /* Receiver Enable */
+#define MAC_ENABLE_RX 0x00000004 /* Receiver Enable */
/* Default LPI timers */
#define STMMAC_DEFAULT_LIT_LS 0x3E8
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
index 84e3e84..a414bde 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
@@ -261,9 +261,9 @@ void stmmac_set_mac(void __iomem *ioaddr, bool enable)
u32 value = readl(ioaddr + MAC_CTRL_REG);
if (enable)
- value |= MAC_RNABLE_RX | MAC_ENABLE_TX;
+ value |= MAC_ENABLE_RX | MAC_ENABLE_TX;
else
- value &= ~(MAC_ENABLE_TX | MAC_RNABLE_RX);
+ value &= ~(MAC_ENABLE_TX | MAC_ENABLE_RX);
writel(value, ioaddr + MAC_CTRL_REG);
}
--
2.10.2
next prev parent reply other threads:[~2017-02-08 8:37 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-08 8:31 [PATCH v2 00/16] net: stmmac: misc fix Corentin Labbe
2017-02-08 8:31 ` Corentin Labbe [this message]
2017-02-08 8:31 ` [PATCH v2 02/16] net: stmmac: Remove the bus_setup function pointer Corentin Labbe
2017-02-08 13:17 ` Giuseppe CAVALLARO
2017-02-08 8:31 ` [PATCH v2 03/16] net: stmmac: fix some typos in comments Corentin Labbe
2017-02-08 8:31 ` [PATCH v2 04/16] net: stmmac: remove freesoftware address Corentin Labbe
2017-02-08 13:17 ` Giuseppe CAVALLARO
2017-02-08 8:31 ` [PATCH v2 05/16] net: stmmac: remplace asm/io.h by linux/io.h Corentin Labbe
2017-02-08 8:31 ` [PATCH v2 06/16] net: stmmac: fix some code style problem Corentin Labbe
2017-02-08 10:41 ` Joe Perches
2017-02-08 15:06 ` Corentin Labbe
2017-02-08 11:57 ` Sergei Shtylyov
2017-02-08 8:31 ` [PATCH v2 07/16] net: stmmac: replace stmmac_mdio_busy_wait by readl_poll_timeout Corentin Labbe
2017-02-08 8:31 ` [PATCH v2 08/16] net: stmmac: Use readl_poll_timeout Corentin Labbe
2017-02-08 13:18 ` Giuseppe CAVALLARO
2017-02-08 8:31 ` [PATCH v2 09/16] net: stmmac: replace ENOSYS by EINVAL Corentin Labbe
2017-02-08 8:31 ` [PATCH v2 10/16] net: stmmac: Correct the error message about invalid speed Corentin Labbe
2017-02-08 13:18 ` Giuseppe CAVALLARO
2017-02-08 8:31 ` [PATCH v2 11/16] net: stmmac: Rewrite two test against NULL value Corentin Labbe
2017-02-08 8:31 ` [PATCH v2 12/16] net: stmmac: rename rx_crc to rx_crc_errors Corentin Labbe
2017-02-08 8:31 ` [PATCH v2 13/16] net: stmmac: print phy information Corentin Labbe
2017-02-08 13:18 ` Giuseppe CAVALLARO
2017-02-08 8:31 ` [PATCH v2 14/16] net: stmmac: remove dead code in stmmac_tx_clean Corentin Labbe
2017-02-08 8:31 ` [PATCH v2 15/16] net: stmmac: remove unused variable in sysfs_display_ring Corentin Labbe
2017-02-08 8:31 ` [PATCH v2 16/16] net: stmmac: replace unsigned by u32 Corentin Labbe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170208083121.27949-2-clabbe.montjoie@gmail.com \
--to=clabbe.montjoie@gmail.com \
--cc=alexandre.torgue@st.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®