[PATCH v2] usb: musb: cppi_dma.c: use DIV_ROUND_UP macro in cppi_next_(r|t)x_segment()

[Ivan Safonov <insafonov@gmail.com>]

DIV_ROUND_UP is bit useful than series of "/" and "%" operations.
Replace "/%" sequence with DIV_ROUND_UP macro.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
---
Changes in v2:
 - little style fix

 drivers/usb/musb/cppi_dma.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index c4fabe95..a13bd36 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -582,9 +582,10 @@ cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx)
 		maxpacket = length;
 		n_bds = 1;
 	} else {
-		n_bds = length / maxpacket;
-		if (!length || (length % maxpacket))
-			n_bds++;
+		if (length)
+			n_bds = DIV_ROUND_UP(length, maxpacket);
+		else
+			n_bds = 1;
 		n_bds = min(n_bds, (unsigned) NUM_TXCHAN_BD);
 		length = min(n_bds * maxpacket, length);
 	}
@@ -790,9 +791,7 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket)
 			n_bds = 0xffff / maxpacket;
 			length = n_bds * maxpacket;
 		} else {
-			n_bds = length / maxpacket;
-			if (length % maxpacket)
-				n_bds++;
+			n_bds = DIV_ROUND_UP(length, maxpacket);
 		}
 		if (n_bds == 1)
 			onepacket = 1;
-- 
2.10.2