Re: [PATCH v2] usb: musb: cppi_dma.c: use DIV_ROUND_UP macro in cppi_next_(r|t)x_segment()

[Bin Liu <b-liu@ti.com>]

On Sat, Mar 25, 2017 at 12:52:58PM +0300, Ivan Safonov wrote:
> DIV_ROUND_UP is bit useful than series of "/" and "%" operations.
> Replace "/%" sequence with DIV_ROUND_UP macro.
> 
> Signed-off-by: Ivan Safonov <insafonov@gmail.com>

Applied. Thanks.
-Bin.

> ---
> Changes in v2:
>  - little style fix
> 
>  drivers/usb/musb/cppi_dma.c | 11 +++++------
>  1 file changed, 5 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
> index c4fabe95..a13bd36 100644
> --- a/drivers/usb/musb/cppi_dma.c
> +++ b/drivers/usb/musb/cppi_dma.c
> @@ -582,9 +582,10 @@ cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx)
>  		maxpacket = length;
>  		n_bds = 1;
>  	} else {
> -		n_bds = length / maxpacket;
> -		if (!length || (length % maxpacket))
> -			n_bds++;
> +		if (length)
> +			n_bds = DIV_ROUND_UP(length, maxpacket);
> +		else
> +			n_bds = 1;
>  		n_bds = min(n_bds, (unsigned) NUM_TXCHAN_BD);
>  		length = min(n_bds * maxpacket, length);
>  	}
> @@ -790,9 +791,7 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket)
>  			n_bds = 0xffff / maxpacket;
>  			length = n_bds * maxpacket;
>  		} else {
> -			n_bds = length / maxpacket;
> -			if (length % maxpacket)
> -				n_bds++;
> +			n_bds = DIV_ROUND_UP(length, maxpacket);
>  		}
>  		if (n_bds == 1)
>  			onepacket = 1;
> -- 
> 2.10.2
>