* [PATCH] staging: tsl2x7x: Moved contents of the header to the source file.
@ 2017-03-23 11:53 Arushi Singhal
2017-03-23 11:59 ` Lars-Peter Clausen
2017-03-25 8:10 ` kbuild test robot
0 siblings, 2 replies; 3+ messages in thread
From: Arushi Singhal @ 2017-03-23 11:53 UTC (permalink / raw)
To: jic23
Cc: Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler,
Greg Kroah-Hartman, linux-iio, devel, linux-kernel,
outreachy-kernel
Moved the contents of the header(tsl2x7x.h) into the source file
tsl2x7x_core.c with the exception of the platform data struct which is
supposed to be used from somewhere else other than the driver.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
---
drivers/staging/iio/light/tsl2x7x.h | 57 -------------------------------
drivers/staging/iio/light/tsl2x7x_core.c | 58 ++++++++++++++++++++++++++++++++
2 files changed, 58 insertions(+), 57 deletions(-)
diff --git a/drivers/staging/iio/light/tsl2x7x.h b/drivers/staging/iio/light/tsl2x7x.h
index ecae92211216..7b71003ddb33 100644
--- a/drivers/staging/iio/light/tsl2x7x.h
+++ b/drivers/staging/iio/light/tsl2x7x.h
@@ -23,63 +23,6 @@
#define __TSL2X7X_H
#include <linux/pm.h>
-/* Max number of segments allowable in LUX table */
-#define TSL2X7X_MAX_LUX_TABLE_SIZE 9
-#define MAX_DEFAULT_TABLE_BYTES (sizeof(int) * TSL2X7X_MAX_LUX_TABLE_SIZE)
-
-struct iio_dev;
-
-struct tsl2x7x_lux {
- unsigned int ratio;
- unsigned int ch0;
- unsigned int ch1;
-};
-
-/**
- * struct tsl2x7x_default_settings - power on defaults unless
- * overridden by platform data.
- * @als_time: ALS Integration time - multiple of 50mS
- * @als_gain: Index into the ALS gain table.
- * @als_gain_trim: default gain trim to account for
- * aperture effects.
- * @wait_time: Time between PRX and ALS cycles
- * in 2.7 periods
- * @prx_time: 5.2ms prox integration time -
- * decrease in 2.7ms periods
- * @prx_gain: Proximity gain index
- * @prox_config: Prox configuration filters.
- * @als_cal_target: Known external ALS reading for
- * calibration.
- * @interrupts_en: Enable/Disable - 0x00 = none, 0x10 = als,
- * 0x20 = prx, 0x30 = bth
- * @persistence: H/W Filters, Number of 'out of limits'
- * ADC readings PRX/ALS.
- * @als_thresh_low: CH0 'low' count to trigger interrupt.
- * @als_thresh_high: CH0 'high' count to trigger interrupt.
- * @prox_thres_low: Low threshold proximity detection.
- * @prox_thres_high: High threshold proximity detection
- * @prox_pulse_count: Number if proximity emitter pulses
- * @prox_max_samples_cal: Used for prox cal.
- */
-struct tsl2x7x_settings {
- int als_time;
- int als_gain;
- int als_gain_trim;
- int wait_time;
- int prx_time;
- int prox_gain;
- int prox_config;
- int als_cal_target;
- u8 interrupts_en;
- u8 persistence;
- int als_thresh_low;
- int als_thresh_high;
- int prox_thres_low;
- int prox_thres_high;
- int prox_pulse_count;
- int prox_max_samples_cal;
-};
-
/**
* struct tsl2X7X_platform_data - Platform callback, glass and defaults
* @platform_power: Suspend/resume platform callback
diff --git a/drivers/staging/iio/light/tsl2x7x_core.c b/drivers/staging/iio/light/tsl2x7x_core.c
index ea15bc1c300c..21cbf7e95c4e 100644
--- a/drivers/staging/iio/light/tsl2x7x_core.c
+++ b/drivers/staging/iio/light/tsl2x7x_core.c
@@ -32,6 +32,64 @@
#include <linux/iio/sysfs.h>
#include "tsl2x7x.h"
+/* Max number of segments allowable in LUX table */
+#define TSL2X7X_MAX_LUX_TABLE_SIZE 9
+#define MAX_DEFAULT_TABLE_BYTES (sizeof(int) * TSL2X7X_MAX_LUX_TABLE_SIZE)
+
+struct iio_dev;
+
+struct tsl2x7x_lux {
+ unsigned int ratio;
+ unsigned int ch0;
+ unsigned int ch1;
+};
+
+/**
+ * struct tsl2x7x_default_settings - power on defaults unless
+ * overridden by platform data.
+ * @als_time: ALS Integration time - multiple of 50mS
+ * @als_gain: Index into the ALS gain table.
+ * @als_gain_trim: default gain trim to account for
+ * aperture effects.
+ * @wait_time: Time between PRX and ALS cycles
+ * in 2.7 periods
+ * @prx_time: 5.2ms prox integration time -
+ * decrease in 2.7ms periods
+ * @prx_gain: Proximity gain index
+ * @prox_config: Prox configuration filters.
+ * @als_cal_target: Known external ALS reading for
+ * calibration.
+ * @interrupts_en: Enable/Disable - 0x00 = none, 0x10 = als,
+ * 0x20 = prx, 0x30 = bth
+ * @persistence: H/W Filters, Number of 'out of limits'
+ * ADC readings PRX/ALS.
+ * @als_thresh_low: CH0 'low' count to trigger interrupt.
+ * @als_thresh_high: CH0 'high' count to trigger interrupt.
+ * @prox_thres_low: Low threshold proximity detection.
+ * @prox_thres_high: High threshold proximity detection
+ * @prox_pulse_count: Number if proximity emitter pulses
+ * @prox_max_samples_cal: Used for prox cal.
+ */
+
+struct tsl2x7x_settings {
+ int als_time;
+ int als_gain;
+ int als_gain_trim;
+ int wait_time;
+ int prx_time;
+ int prox_gain;
+ int prox_config;
+ int als_cal_target;
+ u8 interrupts_en;
+ u8 persistence;
+ int als_thresh_low;
+ int als_thresh_high;
+ int prox_thres_low;
+ int prox_thres_high;
+ int prox_pulse_count;
+ int prox_max_samples_cal;
+};
+
/* Cal defs*/
#define PROX_STAT_CAL 0
#define PROX_STAT_SAMP 1
--
2.11.0
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] staging: tsl2x7x: Moved contents of the header to the source file.
2017-03-23 11:53 [PATCH] staging: tsl2x7x: Moved contents of the header to the source file Arushi Singhal
@ 2017-03-23 11:59 ` Lars-Peter Clausen
2017-03-25 8:10 ` kbuild test robot
1 sibling, 0 replies; 3+ messages in thread
From: Lars-Peter Clausen @ 2017-03-23 11:59 UTC (permalink / raw)
To: Arushi Singhal, jic23
Cc: Hartmut Knaack, Peter Meerwald-Stadler, Greg Kroah-Hartman,
linux-iio, devel, linux-kernel, outreachy-kernel
On 03/23/2017 12:53 PM, Arushi Singhal wrote:
> Moved the contents of the header(tsl2x7x.h) into the source file
> tsl2x7x_core.c with the exception of the platform data struct which is
> supposed to be used from somewhere else other than the driver.
The platform_data struct uses the other structs though.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] staging: tsl2x7x: Moved contents of the header to the source file.
2017-03-23 11:53 [PATCH] staging: tsl2x7x: Moved contents of the header to the source file Arushi Singhal
2017-03-23 11:59 ` Lars-Peter Clausen
@ 2017-03-25 8:10 ` kbuild test robot
1 sibling, 0 replies; 3+ messages in thread
From: kbuild test robot @ 2017-03-25 8:10 UTC (permalink / raw)
To: Arushi Singhal
Cc: kbuild-all, jic23, devel, Lars-Peter Clausen, linux-iio,
Greg Kroah-Hartman, linux-kernel, outreachy-kernel,
Peter Meerwald-Stadler, Hartmut Knaack
[-- Attachment #1: Type: text/plain, Size: 2161 bytes --]
Hi Arushi,
[auto build test ERROR on iio/togreg]
[also build test ERROR on v4.11-rc3 next-20170324]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Arushi-Singhal/staging-tsl2x7x-Moved-contents-of-the-header-to-the-source-file/20170325-152616
base: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git togreg
config: x86_64-randconfig-x004-201712 (attached as .config)
compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901
reproduce:
# save the attached .config to linux build tree
make ARCH=x86_64
All errors (new ones prefixed by >>):
In file included from drivers/staging/iio/light/tsl2x7x_core.c:33:0:
>> drivers/staging/iio/light/tsl2x7x.h:39:40: error: 'TSL2X7X_MAX_LUX_TABLE_SIZE' undeclared here (not in a function)
struct tsl2x7x_lux platform_lux_table[TSL2X7X_MAX_LUX_TABLE_SIZE];
^~~~~~~~~~~~~~~~~~~~~~~~~~
vim +/TSL2X7X_MAX_LUX_TABLE_SIZE +39 drivers/staging/iio/light/tsl2x7x.h
3c97c08b Jon Brenner 2012-04-24 33 *
3c97c08b Jon Brenner 2012-04-24 34 */
3c97c08b Jon Brenner 2012-04-24 35 struct tsl2X7X_platform_data {
3c97c08b Jon Brenner 2012-04-24 36 int (*platform_power)(struct device *dev, pm_message_t);
3c97c08b Jon Brenner 2012-04-24 37 int (*power_on)(struct iio_dev *indio_dev);
3c97c08b Jon Brenner 2012-04-24 38 int (*power_off)(struct i2c_client *dev);
3c97c08b Jon Brenner 2012-04-24 @39 struct tsl2x7x_lux platform_lux_table[TSL2X7X_MAX_LUX_TABLE_SIZE];
3c97c08b Jon Brenner 2012-04-24 40 struct tsl2x7x_settings *platform_default_settings;
3c97c08b Jon Brenner 2012-04-24 41 };
3c97c08b Jon Brenner 2012-04-24 42
:::::: The code at line 39 was first introduced by commit
:::::: 3c97c08b5735ac05ebc0cbd0aa7722393f50b846 staging: iio: add TAOS tsl2x7x driver
:::::: TO: Jon Brenner <jbrenner@taosinc.com>
:::::: CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 26691 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-03-25 8:10 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-03-23 11:53 [PATCH] staging: tsl2x7x: Moved contents of the header to the source file Arushi Singhal
2017-03-23 11:59 ` Lars-Peter Clausen
2017-03-25 8:10 ` kbuild test robot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®