* [PATCH] mmc: sdhci-of-at91: fix MMC_DDR_52 timing selection
@ 2017-03-28 9:00 Ludovic Desroches
2017-03-30 19:30 ` Ulf Hansson
0 siblings, 1 reply; 2+ messages in thread
From: Ludovic Desroches @ 2017-03-28 9:00 UTC (permalink / raw)
To: adrian.hunter, ulf.hansson
Cc: linux-mmc, linux-kernel, nicolas.ferre, Ludovic Desroches, # 4 . 4+
The controller has different timings for MMC_TIMING_UHS_DDR50 and
MMC_TIMING_MMC_DDR52. Configuring the controller with SDHCI_CTRL_UHS_DDR50,
when MMC_TIMING_MMC_DDR52 timings are requested, is not correct and can
lead to unexpected behavior.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Fixes: bb5f8ea4d514 ("mmc: sdhci-of-at91: introduce driver for the Atmel SDMMC")
Cc: <stable@vger.kernel.org> # 4.4+
---
Hi,
Here is the proper fix (I hope!) to the issue I have since commit e173f8911f09
("mmc: core: Update CMD13 polling policy when switch to HS DDR mode"). This
commit was probably not the root cause but causes some side effect due to a
bad timing configuration.
I can't explain how it was working before but for sure I was not configuring
properly the controller timings.
Regards
drivers/mmc/host/sdhci-of-at91.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
index 814571f..7611fd6 100644
--- a/drivers/mmc/host/sdhci-of-at91.c
+++ b/drivers/mmc/host/sdhci-of-at91.c
@@ -29,6 +29,8 @@
#include "sdhci-pltfm.h"
+#define SDMMC_MC1R 0x204
+#define SDMMC_MC1R_DDR BIT(3)
#define SDMMC_CACR 0x230
#define SDMMC_CACR_CAPWREN BIT(0)
#define SDMMC_CACR_KEY (0x46 << 8)
@@ -101,11 +103,18 @@ static void sdhci_at91_set_power(struct sdhci_host *host, unsigned char mode,
sdhci_set_power_noreg(host, mode, vdd);
}
+void sdhci_at91_set_uhs_signaling(struct sdhci_host *host, unsigned int timing)
+{
+ if (timing == MMC_TIMING_MMC_DDR52)
+ sdhci_writeb(host, SDMMC_MC1R_DDR, SDMMC_MC1R);
+ sdhci_set_uhs_signaling(host, timing);
+}
+
static const struct sdhci_ops sdhci_at91_sama5d2_ops = {
.set_clock = sdhci_at91_set_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
- .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .set_uhs_signaling = sdhci_at91_set_uhs_signaling,
.set_power = sdhci_at91_set_power,
};
--
2.9.0
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] mmc: sdhci-of-at91: fix MMC_DDR_52 timing selection
2017-03-28 9:00 [PATCH] mmc: sdhci-of-at91: fix MMC_DDR_52 timing selection Ludovic Desroches
@ 2017-03-30 19:30 ` Ulf Hansson
0 siblings, 0 replies; 2+ messages in thread
From: Ulf Hansson @ 2017-03-30 19:30 UTC (permalink / raw)
To: Ludovic Desroches
Cc: Adrian Hunter, linux-mmc, linux-kernel, nicolas.ferre, # 4 . 4+
On 28 March 2017 at 11:00, Ludovic Desroches
<ludovic.desroches@microchip.com> wrote:
> The controller has different timings for MMC_TIMING_UHS_DDR50 and
> MMC_TIMING_MMC_DDR52. Configuring the controller with SDHCI_CTRL_UHS_DDR50,
> when MMC_TIMING_MMC_DDR52 timings are requested, is not correct and can
> lead to unexpected behavior.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
> Fixes: bb5f8ea4d514 ("mmc: sdhci-of-at91: introduce driver for the Atmel SDMMC")
> Cc: <stable@vger.kernel.org> # 4.4+
Thanks, applied for fixes!
And thanks for really getting to bottom to fix this issue properly!
Kind regards
Uffe
> ---
>
> Hi,
>
> Here is the proper fix (I hope!) to the issue I have since commit e173f8911f09
> ("mmc: core: Update CMD13 polling policy when switch to HS DDR mode"). This
> commit was probably not the root cause but causes some side effect due to a
> bad timing configuration.
>
> I can't explain how it was working before but for sure I was not configuring
> properly the controller timings.
>
> Regards
>
>
> drivers/mmc/host/sdhci-of-at91.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
> index 814571f..7611fd6 100644
> --- a/drivers/mmc/host/sdhci-of-at91.c
> +++ b/drivers/mmc/host/sdhci-of-at91.c
> @@ -29,6 +29,8 @@
>
> #include "sdhci-pltfm.h"
>
> +#define SDMMC_MC1R 0x204
> +#define SDMMC_MC1R_DDR BIT(3)
> #define SDMMC_CACR 0x230
> #define SDMMC_CACR_CAPWREN BIT(0)
> #define SDMMC_CACR_KEY (0x46 << 8)
> @@ -101,11 +103,18 @@ static void sdhci_at91_set_power(struct sdhci_host *host, unsigned char mode,
> sdhci_set_power_noreg(host, mode, vdd);
> }
>
> +void sdhci_at91_set_uhs_signaling(struct sdhci_host *host, unsigned int timing)
> +{
> + if (timing == MMC_TIMING_MMC_DDR52)
> + sdhci_writeb(host, SDMMC_MC1R_DDR, SDMMC_MC1R);
> + sdhci_set_uhs_signaling(host, timing);
> +}
> +
> static const struct sdhci_ops sdhci_at91_sama5d2_ops = {
> .set_clock = sdhci_at91_set_clock,
> .set_bus_width = sdhci_set_bus_width,
> .reset = sdhci_reset,
> - .set_uhs_signaling = sdhci_set_uhs_signaling,
> + .set_uhs_signaling = sdhci_at91_set_uhs_signaling,
> .set_power = sdhci_at91_set_power,
> };
>
> --
> 2.9.0
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-03-30 19:30 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-03-28 9:00 [PATCH] mmc: sdhci-of-at91: fix MMC_DDR_52 timing selection Ludovic Desroches
2017-03-30 19:30 ` Ulf Hansson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®