mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: MyungJoo Ham <myungjoo.ham@samsung.com>,
	Chanwoo Choi <cw00.choi@samsung.com>
Cc: Hans de Goede <hdegoede@redhat.com>, Takashi Iwai <tiwai@suse.de>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 3/3] extcon: intel-cht-wc: Ignore failure to detect charger-type on host mode exit
Date: Mon,  3 Apr 2017 13:26:30 +0200	[thread overview]
Message-ID: <20170403112630.30625-3-hdegoede@redhat.com> (raw)
In-Reply-To: <20170403112630.30625-1-hdegoede@redhat.com>

When we leave host-mode because the id-pin is no longer connected to
ground, the 5v boost converter is normally still on, so we will see
Vbus, but it is not from a charger (normally) so the charger-type
detection will fail.

This commit silences the cht_wc_extcon_get_charger() false-positive
errors when we're leaving host mode.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/extcon/extcon-intel-cht-wc.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/extcon/extcon-intel-cht-wc.c b/drivers/extcon/extcon-intel-cht-wc.c
index 8651f63..0e1f2c7 100644
--- a/drivers/extcon/extcon-intel-cht-wc.c
+++ b/drivers/extcon/extcon-intel-cht-wc.c
@@ -98,6 +98,7 @@ struct cht_wc_extcon_data {
 	struct regmap *regmap;
 	struct extcon_dev *edev;
 	unsigned int previous_cable;
+	bool usb_host;
 };
 
 static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts)
@@ -114,7 +115,8 @@ static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts)
 	return USB_ID_FLOAT;
 }
 
-static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext)
+static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext,
+				     bool ignore_errors)
 {
 	int ret, usbsrc, status;
 	unsigned long timeout;
@@ -137,6 +139,9 @@ static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext)
 	} while (time_before(jiffies, timeout));
 
 	if (status != CHT_WC_USBSRC_STS_SUCCESS) {
+		if (ignore_errors)
+			return EXTCON_CHG_USB_SDP; /* Save fallback */
+
 		if (status == CHT_WC_USBSRC_STS_FAIL)
 			dev_warn(ext->dev, "Could not detect charger type\n");
 		else
@@ -206,6 +211,8 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
 {
 	int ret, pwrsrc_sts, id;
 	unsigned int cable = EXTCON_NONE;
+	/* Ignore errors in host mode, as the 5v boost converter is on then */
+	bool ignore_get_charger_errors = ext->usb_host;
 
 	ret = regmap_read(ext->regmap, CHT_WC_PWRSRC_STS, &pwrsrc_sts);
 	if (ret) {
@@ -226,7 +233,7 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
 		goto set_state;
 	}
 
-	ret = cht_wc_extcon_get_charger(ext);
+	ret = cht_wc_extcon_get_charger(ext, ignore_get_charger_errors);
 	if (ret >= 0)
 		cable = ret;
 
@@ -241,8 +248,8 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
 		ext->previous_cable = cable;
 	}
 
-	extcon_set_state_sync(ext->edev, EXTCON_USB_HOST,
-			      id == USB_ID_GND || id == USB_RID_A);
+	ext->usb_host = id == USB_ID_GND || id == USB_RID_A;
+	extcon_set_state_sync(ext->edev, EXTCON_USB_HOST, ext->usb_host);
 }
 
 static irqreturn_t cht_wc_extcon_isr(int irq, void *data)
-- 
2.9.3

  parent reply	other threads:[~2017-04-03 11:26 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20170403112709epcas3p331d80584db95bebe4d0ce2a020ffdbf0@epcas3p3.samsung.com>
2017-04-03 11:26 ` [PATCH 1/3] extcon: intel-cht-wc: Make error messages consistent Hans de Goede
2017-04-03 11:26   ` [PATCH 2/3] extcon: intel-cht-wc: Disable external 5v boost converter on probe Hans de Goede
2017-04-04  6:31     ` Chanwoo Choi
2017-04-04 10:52       ` Hans de Goede
2017-04-03 11:26   ` Hans de Goede [this message]
2017-04-04  6:19   ` [PATCH 1/3] extcon: intel-cht-wc: Make error messages consistent Chanwoo Choi
2017-04-04  8:53     ` Hans de Goede
2017-04-04 11:58       ` Chanwoo Choi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170403112630.30625-3-hdegoede@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=cw00.choi@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=myungjoo.ham@samsung.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®