mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Richard Guy Briggs <rgb@redhat.com>
To: linux-kernel@vger.kernel.org, linux-audit@redhat.com
Cc: Steven Rostedt <rostedt@goodmis.org>,
	Ingo Molnar <mingo@redhat.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Al Viro <viro@zeniv.linux.org.uk>, Eric Paris <eparis@redhat.com>,
	Paul Moore <pmoore@redhat.com>, Steve Grubb <sgrubb@redhat.com>
Subject: Re: [PATCH ALT4 V2 2/2] audit: filter PATH records keyed on filesystem magic
Date: Tue, 4 Apr 2017 06:02:25 -0400	[thread overview]
Message-ID: <20170404100225.GA18559@madcap2.tricolour.ca> (raw)
In-Reply-To: <c85d1ea09ed0779b623857443fc3443103c622e1.1491296039.git.rgb@redhat.com>

On 2017-04-04 05:21, Richard Guy Briggs wrote:
> Tracefs or debugfs were causing hundreds to thousands of PATH records to
> be associated with the init_module and finit_module SYSCALL records on a
> few modules when the following rule was in place for startup:
> 	-a always,exit -F arch=x86_64 -S init_module -F key=mod-load
> 
> Provide a method to ignore these large number of PATH records from
> overwhelming the logs if they are not of interest.  Introduce a new
> filter list "AUDIT_FILTER_PATH", with a new field type AUDIT_FSTYPE,
> which keys off the filesystem 4-octet hexadecimal magic identifier to
> filter specific filesystem PATH records.
> 
> An example rule would look like:
> 	-a never,path -F fstype=0x74726163 -F key=ignore_tracefs
> 	-a never,path -F fstype=0x64626720 -F key=ignore_debugfs
> 
> Arguably the better way to address this issue is to disable tracefs and
> debugfs on boot from production systems.
> 
> See: https://github.com/linux-audit/audit-kernel/issues/16

Sorry, this issue number is wrong.
See: https://github.com/linux-audit/audit-kernel/issues/8

> Test case: https://github.com/linux-audit/audit-testsuite/issues/42
> 
> Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
> ---
>  include/uapi/linux/audit.h |    8 ++++++--
>  kernel/auditfilter.c       |   39 ++++++++++++++++++++++++++++++++-------
>  kernel/auditsc.c           |   23 +++++++++++++++++++++++
>  3 files changed, 61 insertions(+), 9 deletions(-)
> 
> diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h
> index 3c02bb2..0464910 100644
> --- a/include/uapi/linux/audit.h
> +++ b/include/uapi/linux/audit.h
> @@ -155,8 +155,9 @@
>  #define AUDIT_FILTER_WATCH	0x03	/* Apply rule to file system watches */
>  #define AUDIT_FILTER_EXIT	0x04	/* Apply rule at syscall exit */
>  #define AUDIT_FILTER_TYPE	0x05	/* Apply rule at audit_log_start */
> +#define AUDIT_FILTER_PATH	0x06	/* Apply rule at __audit_inode_child */
>  
> -#define AUDIT_NR_FILTERS	6
> +#define AUDIT_NR_FILTERS	7
>  
>  #define AUDIT_FILTER_PREPEND	0x10	/* Prepend to front of list */
>  
> @@ -256,6 +257,7 @@
>  #define AUDIT_OBJ_LEV_HIGH	23
>  #define AUDIT_LOGINUID_SET	24
>  #define AUDIT_SESSIONID	25	/* Session ID */
> +#define AUDIT_FSTYPE	26	/* FileSystem Type */
>  
>  				/* These are ONLY useful when checking
>  				 * at syscall exit time (AUDIT_AT_EXIT). */
> @@ -334,12 +336,14 @@ enum {
>  #define AUDIT_FEATURE_BITMAP_EXECUTABLE_PATH	0x00000004
>  #define AUDIT_FEATURE_BITMAP_SESSIONID_FILTER	0x00000010
>  #define AUDIT_FEATURE_BITMAP_LOST_RESET		0x00000020
> +#define AUDIT_FEATURE_BITMAP_FILTER_PATH	0x00000040
>  
>  #define AUDIT_FEATURE_BITMAP_ALL (AUDIT_FEATURE_BITMAP_BACKLOG_LIMIT | \
>  				  AUDIT_FEATURE_BITMAP_BACKLOG_WAIT_TIME | \
>  				  AUDIT_FEATURE_BITMAP_EXECUTABLE_PATH | \
>  				  AUDIT_FEATURE_BITMAP_SESSIONID_FILTER | \
> -				  AUDIT_FEATURE_BITMAP_LOST_RESET)
> +				  AUDIT_FEATURE_BITMAP_LOST_RESET | \
> +				  AUDIT_FEATURE_BITMAP_FILTER_PATH)
>  
>  /* deprecated: AUDIT_VERSION_* */
>  #define AUDIT_VERSION_LATEST 		AUDIT_FEATURE_BITMAP_ALL
> diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
> index 239d11c..3e0ccf2 100644
> --- a/kernel/auditfilter.c
> +++ b/kernel/auditfilter.c
> @@ -56,7 +56,8 @@ struct list_head audit_filter_list[AUDIT_NR_FILTERS] = {
>  	LIST_HEAD_INIT(audit_filter_list[3]),
>  	LIST_HEAD_INIT(audit_filter_list[4]),
>  	LIST_HEAD_INIT(audit_filter_list[5]),
> -#if AUDIT_NR_FILTERS != 6
> +	LIST_HEAD_INIT(audit_filter_list[6]),
> +#if AUDIT_NR_FILTERS != 7
>  #error Fix audit_filter_list initialiser
>  #endif
>  };
> @@ -67,6 +68,7 @@ static struct list_head audit_rules_list[AUDIT_NR_FILTERS] = {
>  	LIST_HEAD_INIT(audit_rules_list[3]),
>  	LIST_HEAD_INIT(audit_rules_list[4]),
>  	LIST_HEAD_INIT(audit_rules_list[5]),
> +	LIST_HEAD_INIT(audit_rules_list[6]),
>  };
>  
>  DEFINE_MUTEX(audit_filter_mutex);
> @@ -263,6 +265,7 @@ static inline struct audit_entry *audit_to_entry_common(struct audit_rule_data *
>  #endif
>  	case AUDIT_FILTER_USER:
>  	case AUDIT_FILTER_TYPE:
> +	case AUDIT_FILTER_PATH:
>  		;
>  	}
>  	if (unlikely(rule->action == AUDIT_POSSIBLE)) {
> @@ -338,6 +341,21 @@ static int audit_field_valid(struct audit_entry *entry, struct audit_field *f)
>  		    entry->rule.listnr != AUDIT_FILTER_USER)
>  			return -EINVAL;
>  		break;
> +	case AUDIT_FSTYPE:
> +		if (entry->rule.listnr != AUDIT_FILTER_PATH)
> +			return -EINVAL;
> +		break;
> +	}
> +
> +	switch(entry->rule.listnr) {
> +	case AUDIT_FILTER_PATH:
> +		switch(f->type) {
> +		case AUDIT_FSTYPE:
> +		case AUDIT_FILTERKEY:
> +			break;
> +		default:
> +			return -EINVAL;
> +		}
>  	}
>  
>  	switch(f->type) {
> @@ -391,6 +409,7 @@ static int audit_field_valid(struct audit_entry *entry, struct audit_field *f)
>  			return -EINVAL;
>  	/* FALL THROUGH */
>  	case AUDIT_ARCH:
> +	case AUDIT_FSTYPE:
>  		if (f->op != Audit_not_equal && f->op != Audit_equal)
>  			return -EINVAL;
>  		break;
> @@ -910,10 +929,13 @@ static inline int audit_add_rule(struct audit_entry *entry)
>  #ifdef CONFIG_AUDITSYSCALL
>  	int dont_count = 0;
>  
> -	/* If either of these, don't count towards total */
> -	if (entry->rule.listnr == AUDIT_FILTER_USER ||
> -		entry->rule.listnr == AUDIT_FILTER_TYPE)
> +	/* If any of these, don't count towards total */
> +	switch(entry->rule.listnr) {
> +	case AUDIT_FILTER_USER:
> +	case AUDIT_FILTER_TYPE:
> +	case AUDIT_FILTER_PATH:
>  		dont_count = 1;
> +	}
>  #endif
>  
>  	mutex_lock(&audit_filter_mutex);
> @@ -989,10 +1011,13 @@ int audit_del_rule(struct audit_entry *entry)
>  #ifdef CONFIG_AUDITSYSCALL
>  	int dont_count = 0;
>  
> -	/* If either of these, don't count towards total */
> -	if (entry->rule.listnr == AUDIT_FILTER_USER ||
> -		entry->rule.listnr == AUDIT_FILTER_TYPE)
> +	/* If any of these, don't count towards total */
> +	switch(entry->rule.listnr) {
> +	case AUDIT_FILTER_USER:
> +	case AUDIT_FILTER_TYPE:
> +	case AUDIT_FILTER_PATH:
>  		dont_count = 1;
> +	}
>  #endif
>  
>  	mutex_lock(&audit_filter_mutex);
> diff --git a/kernel/auditsc.c b/kernel/auditsc.c
> index b3797c7..a12531f 100644
> --- a/kernel/auditsc.c
> +++ b/kernel/auditsc.c
> @@ -1868,10 +1868,33 @@ void __audit_inode_child(struct inode *parent,
>  	struct inode *inode = d_backing_inode(dentry);
>  	const char *dname = dentry->d_name.name;
>  	struct audit_names *n, *found_parent = NULL, *found_child = NULL;
> +	struct audit_entry *e;
> +	struct list_head *list = &audit_filter_list[AUDIT_FILTER_PATH];
> +	int i;
>  
>  	if (!context->in_syscall)
>  		return;
>  
> +        rcu_read_lock();
> +	if (!list_empty(list)) {
> +        	list_for_each_entry_rcu(e, list, list) {
> +			for (i = 0; i < e->rule.field_count; i++) {
> +                		struct audit_field *f = &e->rule.fields[i];
> +
> +                		if (f->type == AUDIT_FSTYPE) {
> +                        		if (audit_comparator(parent->i_sb->s_magic,
> +					    f->op, f->val)) {
> +                        			if (e->rule.action == AUDIT_NEVER) {
> +                                			rcu_read_unlock();
> +                                			return;
> +						}
> +                        		}
> +                		}
> +			}
> +        	}
> +	}
> +        rcu_read_unlock();
> +
>  	if (inode)
>  		handle_one(inode);
>  
> -- 
> 1.7.1
> 

- RGB

--
Richard Guy Briggs <rgb@redhat.com>
Sr. S/W Engineer, Kernel Security, Base Operating Systems
Remote, Ottawa, Red Hat Canada
IRC: rgb, SunRaycer
Voice: +1.647.777.2635, Internal: (81) 32635

  reply	other threads:[~2017-04-04 10:03 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-04  9:21 [PATCH ALT4 V2 1/2] audit: show fstype:pathname for entries with anonymous parents Richard Guy Briggs
2017-04-04  9:21 ` [PATCH ALT4 V2 2/2] audit: filter PATH records keyed on filesystem magic Richard Guy Briggs
2017-04-04 10:02   ` Richard Guy Briggs [this message]
2017-05-30 21:30   ` Paul Moore
2017-06-27 20:45     ` Richard Guy Briggs
2017-06-28 19:08       ` Paul Moore
2017-06-28 21:25         ` Richard Guy Briggs
2017-04-04 21:19 ` [PATCH ALT4 V2 1/2] audit: show fstype:pathname for entries with anonymous parents Paul Moore
2017-04-05  4:18   ` Richard Guy Briggs
2017-05-30 21:21 ` Paul Moore
2017-06-27 21:11   ` Richard Guy Briggs
2017-06-28 19:03     ` Paul Moore
2017-06-29 21:21       ` Richard Guy Briggs
2017-06-29 23:58         ` Steven Rostedt
2017-06-30 13:07           ` Richard Guy Briggs
2017-08-11  6:36       ` Richard Guy Briggs
2017-08-14  4:32         ` Richard Guy Briggs

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170404100225.GA18559@madcap2.tricolour.ca \
    --to=rgb@redhat.com \
    --cc=eparis@redhat.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-audit@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=pmoore@redhat.com \
    --cc=rostedt@goodmis.org \
    --cc=sgrubb@redhat.com \
    --cc=viro@zeniv.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®