mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Palmer Dabbelt <palmer@dabbelt.com>
To: linux-kernel@vger.kernel.org
To: Arnd Bergmann <arnd@arndb.de>
To: olof@lixom.net
Cc: albert@sifive.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Subject: [PATCH 5/7] RISC-V: arch/riscv/lib
Date: Mon, 22 May 2017 17:41:05 -0700	[thread overview]
Message-ID: <20170523004107.536-6-palmer@dabbelt.com> (raw)
In-Reply-To: <20170523004107.536-1-palmer@dabbelt.com>

---
 arch/riscv/lib/Makefile  |   5 ++
 arch/riscv/lib/ashldi3.c |  42 ++++++++++++++++
 arch/riscv/lib/ashrdi3.c |  44 +++++++++++++++++
 arch/riscv/lib/delay.c   |  42 ++++++++++++++++
 arch/riscv/lib/libgcc.h  |  46 +++++++++++++++++
 arch/riscv/lib/lshrdi3.c |  42 ++++++++++++++++
 arch/riscv/lib/memcpy.S  |  99 +++++++++++++++++++++++++++++++++++++
 arch/riscv/lib/memset.S  | 119 ++++++++++++++++++++++++++++++++++++++++++++
 arch/riscv/lib/uaccess.S | 125 +++++++++++++++++++++++++++++++++++++++++++++++
 9 files changed, 564 insertions(+)
 create mode 100644 arch/riscv/lib/Makefile
 create mode 100644 arch/riscv/lib/ashldi3.c
 create mode 100644 arch/riscv/lib/ashrdi3.c
 create mode 100644 arch/riscv/lib/delay.c
 create mode 100644 arch/riscv/lib/libgcc.h
 create mode 100644 arch/riscv/lib/lshrdi3.c
 create mode 100644 arch/riscv/lib/memcpy.S
 create mode 100644 arch/riscv/lib/memset.S
 create mode 100644 arch/riscv/lib/uaccess.S

diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile
new file mode 100644
index 000000000000..f644e582f4b8
--- /dev/null
+++ b/arch/riscv/lib/Makefile
@@ -0,0 +1,5 @@
+lib-y	:= delay.o memcpy.o memset.o uaccess.o
+
+ifeq ($(CONFIG_64BIT),)
+lib-y += ashldi3.o ashrdi3.o lshrdi3.o
+endif
diff --git a/arch/riscv/lib/ashldi3.c b/arch/riscv/lib/ashldi3.c
new file mode 100644
index 000000000000..9fb71e82ff16
--- /dev/null
+++ b/arch/riscv/lib/ashldi3.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2014 Darius Rad <darius@bluespec.com>
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/export.h>
+
+#include "libgcc.h"
+
+long long __ashldi3(long long u, word_type b)
+{
+	DWunion uu, w;
+	word_type bm;
+
+	if (b == 0)
+		return u;
+
+	uu.ll = u;
+	bm = 32 - b;
+
+	if (bm <= 0) {
+		w.s.low = 0;
+		w.s.high = (unsigned int) uu.s.low << -bm;
+	} else {
+		const unsigned int carries = (unsigned int) uu.s.low >> bm;
+
+		w.s.low = (unsigned int) uu.s.low << b;
+		w.s.high = ((unsigned int) uu.s.high << b) | carries;
+	}
+
+	return w.ll;
+}
+EXPORT_SYMBOL(__ashldi3);
diff --git a/arch/riscv/lib/ashrdi3.c b/arch/riscv/lib/ashrdi3.c
new file mode 100644
index 000000000000..8a92e7e8de33
--- /dev/null
+++ b/arch/riscv/lib/ashrdi3.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2014 Darius Rad <darius@bluespec.com>
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/export.h>
+
+#include "libgcc.h"
+
+long long __ashrdi3(long long u, word_type b)
+{
+	DWunion uu, w;
+	word_type bm;
+
+	if (b == 0)
+		return u;
+
+	uu.ll = u;
+	bm = 32 - b;
+
+	if (bm <= 0) {
+		/* w.s.high = 1..1 or 0..0 */
+		w.s.high =
+		    uu.s.high >> 31;
+		w.s.low = uu.s.high >> -bm;
+	} else {
+		const unsigned int carries = (unsigned int) uu.s.high << bm;
+
+		w.s.high = uu.s.high >> b;
+		w.s.low = ((unsigned int) uu.s.low >> b) | carries;
+	}
+
+	return w.ll;
+}
+EXPORT_SYMBOL(__ashrdi3);
diff --git a/arch/riscv/lib/delay.c b/arch/riscv/lib/delay.c
new file mode 100644
index 000000000000..3c7bf85a0b04
--- /dev/null
+++ b/arch/riscv/lib/delay.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2012 Regents of the University of California
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/param.h>
+#include <linux/timex.h>
+#include <linux/export.h>
+
+void __delay(unsigned long cycles)
+{
+	u64 t0 = get_cycles();
+
+	while ((unsigned long)(get_cycles() - t0) < cycles)
+		cpu_relax();
+}
+
+void udelay(unsigned long usecs)
+{
+	u64 ucycles = (u64)usecs * timebase;
+	do_div(ucycles, 1000000U);
+	__delay((unsigned long)ucycles);
+}
+EXPORT_SYMBOL(udelay);
+
+void ndelay(unsigned long nsecs)
+{
+	u64 ncycles = (u64)nsecs * timebase;
+	do_div(ncycles, 1000000000U);
+	__delay((unsigned long)ncycles);
+}
+EXPORT_SYMBOL(ndelay);
diff --git a/arch/riscv/lib/libgcc.h b/arch/riscv/lib/libgcc.h
new file mode 100644
index 000000000000..2d3fa9d87922
--- /dev/null
+++ b/arch/riscv/lib/libgcc.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2012 Regents of the University of California
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef __ASM_LIBGCC_H
+#define __ASM_LIBGCC_H
+
+#include <asm/byteorder.h>
+
+typedef int word_type __attribute__ ((mode (__word__)));
+
+#ifdef __BIG_ENDIAN
+struct DWstruct {
+	int high, low;
+};
+#elif defined(__LITTLE_ENDIAN)
+struct DWstruct {
+	int low, high;
+};
+#else
+#error I feel sick.
+#endif
+
+typedef union {
+	struct DWstruct s;
+	long long ll;
+} DWunion;
+
+extern long long __ashldi3(long long u, word_type b);
+extern long long __ashrdi3(long long u, word_type b);
+extern word_type __cmpdi2(long long a, long long b);
+extern long long __lshrdi3(long long u, word_type b);
+extern long long __muldi3(long long u, long long v);
+extern word_type __ucmpdi2(unsigned long long a, unsigned long long b);
+
+#endif /* __ASM_LIBGCC_H */
diff --git a/arch/riscv/lib/lshrdi3.c b/arch/riscv/lib/lshrdi3.c
new file mode 100644
index 000000000000..ad4e132959f9
--- /dev/null
+++ b/arch/riscv/lib/lshrdi3.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2014 Darius Rad <darius@bluespec.com>
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/export.h>
+
+#include "libgcc.h"
+
+long long __lshrdi3(long long u, word_type b)
+{
+	DWunion uu, w;
+	word_type bm;
+
+	if (b == 0)
+		return u;
+
+	uu.ll = u;
+	bm = 32 - b;
+
+	if (bm <= 0) {
+		w.s.high = 0;
+		w.s.low = (unsigned int) uu.s.high >> -bm;
+	} else {
+		const unsigned int carries = (unsigned int) uu.s.high << bm;
+
+		w.s.high = (unsigned int) uu.s.high >> b;
+		w.s.low = ((unsigned int) uu.s.low >> b) | carries;
+	}
+
+	return w.ll;
+}
+EXPORT_SYMBOL(__lshrdi3);
diff --git a/arch/riscv/lib/memcpy.S b/arch/riscv/lib/memcpy.S
new file mode 100644
index 000000000000..1d789ff57d7d
--- /dev/null
+++ b/arch/riscv/lib/memcpy.S
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2013 Regents of the University of California
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm.h>
+
+/* void *memcpy(void *, const void *, size_t) */
+ENTRY(memcpy)
+	move t6, a0  /* Preserve return value */
+
+	/* Defer to byte-oriented copy for small sizes */
+	sltiu a3, a2, 128
+	bnez a3, 4f
+	/* Use word-oriented copy only if low-order bits match */
+	andi a3, t6, SZREG-1
+	andi a4, a1, SZREG-1
+	bne a3, a4, 4f
+
+	beqz a3, 2f  /* Skip if already aligned */
+	/* Round to nearest double word-aligned address
+	   greater than or equal to start address */
+	andi a3, a1, ~(SZREG-1)
+	addi a3, a3, SZREG
+	/* Handle initial misalignment */
+	sub a4, a3, a1
+1:
+	lb a5, 0(a1)
+	addi a1, a1, 1
+	sb a5, 0(t6)
+	addi t6, t6, 1
+	bltu a1, a3, 1b
+	sub a2, a2, a4  /* Update count */
+
+2:
+	andi a4, a2, ~((16*SZREG)-1)
+	beqz a4, 4f
+	add a3, a1, a4
+3:
+	REG_L a4,       0(a1)
+	REG_L a5,   SZREG(a1)
+	REG_L a6, 2*SZREG(a1)
+	REG_L a7, 3*SZREG(a1)
+	REG_L t0, 4*SZREG(a1)
+	REG_L t1, 5*SZREG(a1)
+	REG_L t2, 6*SZREG(a1)
+	REG_L t3, 7*SZREG(a1)
+	REG_L t4, 8*SZREG(a1)
+	REG_L t5, 9*SZREG(a1)
+	REG_S a4,       0(t6)
+	REG_S a5,   SZREG(t6)
+	REG_S a6, 2*SZREG(t6)
+	REG_S a7, 3*SZREG(t6)
+	REG_S t0, 4*SZREG(t6)
+	REG_S t1, 5*SZREG(t6)
+	REG_S t2, 6*SZREG(t6)
+	REG_S t3, 7*SZREG(t6)
+	REG_S t4, 8*SZREG(t6)
+	REG_S t5, 9*SZREG(t6)
+	REG_L a4, 10*SZREG(a1)
+	REG_L a5, 11*SZREG(a1)
+	REG_L a6, 12*SZREG(a1)
+	REG_L a7, 13*SZREG(a1)
+	REG_L t0, 14*SZREG(a1)
+	REG_L t1, 15*SZREG(a1)
+	addi a1, a1, 16*SZREG
+	REG_S a4, 10*SZREG(t6)
+	REG_S a5, 11*SZREG(t6)
+	REG_S a6, 12*SZREG(t6)
+	REG_S a7, 13*SZREG(t6)
+	REG_S t0, 14*SZREG(t6)
+	REG_S t1, 15*SZREG(t6)
+	addi t6, t6, 16*SZREG
+	bltu a1, a3, 3b
+	andi a2, a2, (16*SZREG)-1  /* Update count */
+
+4:
+	/* Handle trailing misalignment */
+	beqz a2, 6f
+	add a3, a1, a2
+5:
+	lb a4, 0(a1)
+	addi a1, a1, 1
+	sb a4, 0(t6)
+	addi t6, t6, 1
+	bltu a1, a3, 5b
+6:
+	ret
+END(memcpy)
diff --git a/arch/riscv/lib/memset.S b/arch/riscv/lib/memset.S
new file mode 100644
index 000000000000..9d5156899232
--- /dev/null
+++ b/arch/riscv/lib/memset.S
@@ -0,0 +1,119 @@
+/*
+ * Copyright (C) 2013 Regents of the University of California
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+
+#include <linux/linkage.h>
+#include <asm/asm.h>
+
+/* void *memset(void *, int, size_t) */
+ENTRY(memset)
+	move t0, a0  /* Preserve return value */
+
+	/* Defer to byte-oriented fill for small sizes */
+	sltiu a3, a2, 16
+	bnez a3, 4f
+
+	/* Round to nearest XLEN-aligned address
+	   greater than or equal to start address */
+	addi a3, t0, SZREG-1
+	andi a3, a3, ~(SZREG-1)
+	beq a3, t0, 2f  /* Skip if already aligned */
+	/* Handle initial misalignment */
+	sub a4, a3, t0
+1:
+	sb a1, 0(t0)
+	addi t0, t0, 1
+	bltu t0, a3, 1b
+	sub a2, a2, a4  /* Update count */
+
+2: /* Duff's device with 32 XLEN stores per iteration */
+	/* Broadcast value into all bytes */
+	andi a1, a1, 0xff
+	slli a3, a1, 8
+	or a1, a3, a1
+	slli a3, a1, 16
+	or a1, a3, a1
+#ifdef CONFIG_64BIT
+	slli a3, a1, 32
+	or a1, a3, a1
+#endif
+
+	/* Calculate end address */
+	andi a4, a2, ~(SZREG-1)
+	add a3, t0, a4
+
+	andi a4, a4, 31*SZREG  /* Calculate remainder */
+	beqz a4, 3f            /* Shortcut if no remainder */
+	neg a4, a4
+	addi a4, a4, 32*SZREG  /* Calculate initial offset */
+
+	/* Adjust start address with offset */
+	sub t0, t0, a4
+
+	/* Jump into loop body */
+	/* Assumes 32-bit instruction lengths */
+	la a5, 3f
+#ifdef CONFIG_64BIT
+	srli a4, a4, 1
+#endif
+	add a5, a5, a4
+	jr a5
+3:
+	REG_S a1,        0(t0)
+	REG_S a1,    SZREG(t0)
+	REG_S a1,  2*SZREG(t0)
+	REG_S a1,  3*SZREG(t0)
+	REG_S a1,  4*SZREG(t0)
+	REG_S a1,  5*SZREG(t0)
+	REG_S a1,  6*SZREG(t0)
+	REG_S a1,  7*SZREG(t0)
+	REG_S a1,  8*SZREG(t0)
+	REG_S a1,  9*SZREG(t0)
+	REG_S a1, 10*SZREG(t0)
+	REG_S a1, 11*SZREG(t0)
+	REG_S a1, 12*SZREG(t0)
+	REG_S a1, 13*SZREG(t0)
+	REG_S a1, 14*SZREG(t0)
+	REG_S a1, 15*SZREG(t0)
+	REG_S a1, 16*SZREG(t0)
+	REG_S a1, 17*SZREG(t0)
+	REG_S a1, 18*SZREG(t0)
+	REG_S a1, 19*SZREG(t0)
+	REG_S a1, 20*SZREG(t0)
+	REG_S a1, 21*SZREG(t0)
+	REG_S a1, 22*SZREG(t0)
+	REG_S a1, 23*SZREG(t0)
+	REG_S a1, 24*SZREG(t0)
+	REG_S a1, 25*SZREG(t0)
+	REG_S a1, 26*SZREG(t0)
+	REG_S a1, 27*SZREG(t0)
+	REG_S a1, 28*SZREG(t0)
+	REG_S a1, 29*SZREG(t0)
+	REG_S a1, 30*SZREG(t0)
+	REG_S a1, 31*SZREG(t0)
+	addi t0, t0, 32*SZREG
+	bltu t0, a3, 3b
+	andi a2, a2, SZREG-1  /* Update count */
+
+4:
+	/* Handle trailing misalignment */
+	beqz a2, 6f
+	add a3, t0, a2
+5:
+	sb a1, 0(t0)
+	addi t0, t0, 1
+	bltu t0, a3, 5b
+6:
+	ret
+END(memset)
diff --git a/arch/riscv/lib/uaccess.S b/arch/riscv/lib/uaccess.S
new file mode 100644
index 000000000000..971ae7d86f97
--- /dev/null
+++ b/arch/riscv/lib/uaccess.S
@@ -0,0 +1,125 @@
+#include <linux/linkage.h>
+#include <asm/asm.h>
+#include <asm/csr.h>
+
+	.altmacro
+	.macro fixup op reg addr lbl
+	LOCAL _epc
+_epc:
+	\op \reg, \addr
+	.section __ex_table,"a"
+	.balign SZPTR
+	PTR _epc, \lbl
+	.previous
+	.endm
+
+ENTRY(__copy_user)
+
+#ifdef CONFIG_RV_PUM
+	/* Enable access to user memory */
+	li t6, SR_SUM
+	csrs sstatus, t6
+#endif
+
+	add a3, a1, a2
+	/* Use word-oriented copy only if low-order bits match */
+	andi t0, a0, SZREG-1
+	andi t1, a1, SZREG-1
+	bne t0, t1, 2f
+
+	addi t0, a1, SZREG-1
+	andi t1, a3, ~(SZREG-1)
+	andi t0, t0, ~(SZREG-1)
+	/* a3: terminal address of source region
+	 * t0: lowest XLEN-aligned address in source
+	 * t1: highest XLEN-aligned address in source
+	 */
+	bgeu t0, t1, 2f
+	bltu a1, t0, 4f
+1:
+	fixup REG_L, t2, (a1), 10f
+	fixup REG_S, t2, (a0), 10f
+	addi a1, a1, SZREG
+	addi a0, a0, SZREG
+	bltu a1, t1, 1b
+2:
+	bltu a1, a3, 5f
+
+3:
+#ifdef CONFIG_RV_PUM
+	/* Disable access to user memory */
+	csrc sstatus, t6
+#endif
+	li a0, 0
+	ret
+4: /* Edge case: unalignment */
+	fixup lbu, t2, (a1), 10f
+	fixup sb, t2, (a0), 10f
+	addi a1, a1, 1
+	addi a0, a0, 1
+	bltu a1, t0, 4b
+	j 1b
+5: /* Edge case: remainder */
+	fixup lbu, t2, (a1), 10f
+	fixup sb, t2, (a0), 10f
+	addi a1, a1, 1
+	addi a0, a0, 1
+	bltu a1, a3, 5b
+	j 3b
+ENDPROC(__copy_user)
+
+
+ENTRY(__clear_user)
+
+#ifdef CONFIG_RV_PUM
+	/* Enable access to user memory */
+	li t6, SR_SUM
+	csrs sstatus, t6
+#endif
+
+	add a3, a0, a1
+	addi t0, a0, SZREG-1
+	andi t1, a3, ~(SZREG-1)
+	andi t0, t0, ~(SZREG-1)
+	/* a3: terminal address of target region
+	 * t0: lowest doubleword-aligned address in target region
+	 * t1: highest doubleword-aligned address in target region
+	 */
+	bgeu t0, t1, 2f
+	bltu a0, t0, 4f
+1:
+	fixup REG_S, zero, (a0), 10f
+	addi a0, a0, SZREG
+	bltu a0, t1, 1b
+2:
+	bltu a0, a3, 5f
+
+3:
+#ifdef CONFIG_RV_PUM
+	/* Disable access to user memory */
+	csrc sstatus, t6
+#endif
+	li a0, 0
+	ret
+4: /* Edge case: unalignment */
+	fixup sb, zero, (a0), 10f
+	addi a0, a0, 1
+	bltu a0, t0, 4b
+	j 1b
+5: /* Edge case: remainder */
+	fixup sb, zero, (a0), 10f
+	addi a0, a0, 1
+	bltu a0, a3, 5b
+	j 3b
+ENDPROC(__clear_user)
+
+	.section .fixup,"ax"
+	.balign 4
+10:
+#ifdef CONFIG_RV_PUM
+	/* Disable access to user memory */
+	csrs sstatus, t6
+#endif
+	sub a0, a3, a0
+	ret
+	.previous
-- 
2.13.0

  parent reply	other threads:[~2017-05-23  0:44 UTC|newest]

Thread overview: 200+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-23  0:41 RISC-V Linux Port v1 Palmer Dabbelt
2017-05-23  0:41 ` [PATCH 1/7] RISC-V: Top-Level Makefile for riscv{32,64} Palmer Dabbelt
2017-05-23 11:30   ` Arnd Bergmann
2017-05-27  0:57     ` Palmer Dabbelt
2017-05-29 10:50       ` Arnd Bergmann
2017-06-06  4:56         ` Palmer Dabbelt
2017-06-06 17:39           ` Karsten Merker
2017-06-06 17:57             ` Palmer Dabbelt
2017-05-23  0:41 ` [PATCH 2/7] RISC-V: arch/riscv Makefile and Kconfigs Palmer Dabbelt
2017-05-23  1:27   ` Olof Johansson
2017-05-23  1:31     ` Randy Dunlap
2017-05-23  4:49       ` Palmer Dabbelt
2017-05-23  4:49     ` Palmer Dabbelt
2017-05-23  5:16       ` [patches] " Olof Johansson
2017-05-23 21:07         ` Benjamin Herrenschmidt
2017-05-23  5:23   ` Olof Johansson
2017-05-23 15:29     ` Palmer Dabbelt
2017-05-23 10:51   ` Geert Uytterhoeven
2017-05-25  1:59     ` Palmer Dabbelt
2017-05-23 11:46   ` Arnd Bergmann
2017-05-27  0:57     ` Palmer Dabbelt
2017-05-29 11:17       ` Arnd Bergmann
2017-06-06  4:56         ` Palmer Dabbelt
2017-06-06  9:20           ` Arnd Bergmann
2017-06-06 20:38             ` Palmer Dabbelt
2017-05-23  0:41 ` [PATCH 3/7] RISC-V: Device Tree Documentation Palmer Dabbelt
2017-05-23 12:03   ` Arnd Bergmann
2017-05-27  0:57     ` Palmer Dabbelt
2017-05-23  0:41 ` [PATCH 4/7] RISC-V: arch/riscv/include Palmer Dabbelt
2017-05-23 12:55   ` Arnd Bergmann
2017-05-23 21:23     ` Benjamin Herrenschmidt
2017-06-03  2:00       ` Palmer Dabbelt
2017-06-01  0:56     ` Palmer Dabbelt
2017-06-01  9:00       ` Arnd Bergmann
2017-06-06  4:56         ` Palmer Dabbelt
2017-06-06  8:54           ` Arnd Bergmann
2017-06-06 19:07             ` Palmer Dabbelt
2017-05-23  0:41 ` Palmer Dabbelt [this message]
2017-05-23 10:47   ` [PATCH 5/7] RISC-V: arch/riscv/lib Geert Uytterhoeven
2017-05-23 22:07     ` Palmer Dabbelt
2017-05-23 11:19   ` Arnd Bergmann
2017-05-25  1:59     ` Palmer Dabbelt
2017-05-26  9:06       ` Arnd Bergmann
2017-06-06  4:56         ` Palmer Dabbelt
2017-06-06  9:31           ` Arnd Bergmann
2017-06-06 20:53             ` Palmer Dabbelt
2017-06-07  7:35               ` Arnd Bergmann
2017-06-23 23:24                 ` Palmer Dabbelt
2017-05-23  0:41 ` [PATCH 6/7] RISC-V: arch/riscv/kernel Palmer Dabbelt
2017-05-23  2:11   ` Olof Johansson
2017-05-25  1:59     ` Palmer Dabbelt
2017-05-25 19:51       ` Arnd Bergmann
2017-06-06  4:56         ` Palmer Dabbelt
2017-06-06  9:03           ` Arnd Bergmann
2017-06-06 20:38             ` Palmer Dabbelt
2017-05-23 13:35   ` Arnd Bergmann
2017-06-02 23:56     ` Palmer Dabbelt
2017-06-06  9:01       ` Arnd Bergmann
2017-06-06 20:37         ` Palmer Dabbelt
2017-05-25 17:05   ` Pavel Machek
2017-06-03  3:32     ` Palmer Dabbelt
2017-05-23  0:41 ` [PATCH 7/7] RISC-V: arch/riscv/mm Palmer Dabbelt
2017-05-23  1:28   ` Randy Dunlap
2017-05-23  2:17     ` Olof Johansson
2017-05-23  3:36       ` Palmer Dabbelt
2017-05-23  1:16 ` RISC-V Linux Port v1 Olof Johansson
2017-05-23  1:25   ` Randy Dunlap
2017-05-23  3:36     ` Palmer Dabbelt
2017-05-23  3:36   ` Palmer Dabbelt
2017-05-23  6:45     ` Tobias Klauser
2017-05-23 15:44       ` Palmer Dabbelt
2017-05-23  2:16 ` Randy Dunlap
2017-05-23  4:49   ` Palmer Dabbelt
2017-06-06 22:59 ` RISC-V Linux Port v2 Palmer Dabbelt
2017-06-06 22:59   ` [PATCH 01/17] drivers: support PCIe in RISCV Palmer Dabbelt
2017-06-07  7:17     ` Geert Uytterhoeven
2017-06-07 14:25     ` Christoph Hellwig
     [not found]       ` <CAMgXwTjXZ5dsxmJ2FyWhCRWo-3nyvKUDfhfV0nNC+oakF=AEsA@mail.gmail.com>
2017-06-07 17:40         ` Olof Johansson
2017-06-23 21:47           ` [patches] " Palmer Dabbelt
2017-06-06 22:59   ` [PATCH 02/17] pcie-xilinx: add missing 5th legacy interrupt Palmer Dabbelt
2017-06-07  7:18     ` Geert Uytterhoeven
2017-06-07  9:24     ` Marc Zyngier
2017-06-07 19:03       ` Wesley Terpstra
2017-06-06 22:59   ` [PATCH 03/17] base: fix order of OF initialization Palmer Dabbelt
2017-06-07  7:07     ` Geert Uytterhoeven
2017-06-07  9:35       ` Mark Rutland
2017-06-07 18:39         ` Wesley Terpstra
2017-06-07 21:10           ` Benjamin Herrenschmidt
2017-06-08  3:49           ` Frank Rowand
2017-06-08  9:05             ` Mark Rutland
2017-06-09  0:37               ` Frank Rowand
2017-06-06 22:59   ` [PATCH 04/17] Documentation: atomic_ops.txt is core-api/atomic_ops.rst Palmer Dabbelt
2017-06-07  7:19     ` Geert Uytterhoeven
2017-06-07  9:20     ` Will Deacon
2017-06-06 22:59   ` [PATCH 05/17] MAINTAINERS: Add RISC-V Palmer Dabbelt
2017-06-06 22:59   ` [PATCH 06/17] pci: Add generic pcibios_{fixup_bus,align_resource} Palmer Dabbelt
2017-06-07  7:19     ` Geert Uytterhoeven
2017-06-07  8:01       ` Arnd Bergmann
2017-06-24  2:01         ` Palmer Dabbelt
2017-06-08  8:12       ` Christoph Hellwig
2017-06-08  8:35         ` Arnd Bergmann
2017-06-24  2:01           ` Palmer Dabbelt
2017-06-06 22:59   ` [PATCH 07/17] lib: Add shared copies of some GCC library routines Palmer Dabbelt
2017-06-06 22:59   ` [PATCH 08/17] dts: include documentation for the RISC-V interrupt controllers Palmer Dabbelt
2017-06-07  7:11     ` Geert Uytterhoeven
2017-06-07 10:13       ` Mark Rutland
2017-06-07 18:57         ` Wesley Terpstra
2017-06-07 19:57           ` Rob Herring
2017-06-07 20:31             ` Wesley Terpstra
2017-06-08 10:52           ` Mark Rutland
2017-06-09 21:46             ` Wesley Terpstra
2017-06-09 21:58             ` Wesley Terpstra
2017-06-19 14:30               ` Mark Rutland
2017-06-07 22:27     ` Luis R. Rodriguez
2017-06-06 22:59   ` [PATCH 09/17] clocksource/timer-riscv: New RISC-V Clocksource Palmer Dabbelt
2017-06-07  7:12     ` Geert Uytterhoeven
2017-06-07  7:25       ` Arnd Bergmann
2017-06-23 23:24         ` Palmer Dabbelt
2017-06-07  9:43     ` Marc Zyngier
2017-06-24  2:02       ` Palmer Dabbelt
2017-06-06 23:00   ` [PATCH 10/17] irqchip: New RISC-V PLIC Driver Palmer Dabbelt
2017-06-07  7:13     ` Geert Uytterhoeven
2017-06-07  7:55       ` Arnd Bergmann
2017-06-24  0:45         ` Palmer Dabbelt
2017-06-07 10:52     ` Marc Zyngier
2017-06-09 13:47       ` Will Deacon
2017-06-27  1:09         ` Palmer Dabbelt
2017-06-25 20:49       ` Palmer Dabbelt
2017-06-06 23:00   ` [PATCH 11/17] irqchip: RISC-V Local Interrupt Controller Driver Palmer Dabbelt
2017-06-07  7:14     ` Geert Uytterhoeven
2017-06-06 23:00   ` [PATCH 12/17] tty: New RISC-V SBI Console Driver Palmer Dabbelt
2017-06-07  7:15     ` Geert Uytterhoeven
2017-06-07  7:58       ` Arnd Bergmann
2017-06-24  0:45         ` Palmer Dabbelt
2017-06-06 23:00   ` [PATCH 13/17] RISC-V: Add include subdirectory Palmer Dabbelt
2017-06-07  8:12     ` Arnd Bergmann
2017-06-24  2:01       ` Palmer Dabbelt
2017-06-24 15:42         ` Benjamin Herrenschmidt
2017-06-24 21:32           ` [patches] " Palmer Dabbelt
2017-06-25  3:01             ` Benjamin Herrenschmidt
2017-06-07 11:54     ` Peter Zijlstra
2017-06-07 12:25       ` Peter Zijlstra
2017-06-07 12:06     ` Peter Zijlstra
2017-06-07 12:18       ` Peter Zijlstra
2017-06-07 12:36       ` Peter Zijlstra
2017-06-07 12:58         ` Peter Zijlstra
2017-06-07 13:16           ` Will Deacon
2017-06-26 20:07             ` Palmer Dabbelt
2017-06-27  0:07               ` Daniel Lustig
2017-06-27  8:48                 ` Will Deacon
2017-06-07 16:35           ` Peter Zijlstra
2017-06-26 20:07           ` Palmer Dabbelt
2017-06-07 12:42     ` Peter Zijlstra
2017-06-07 13:17     ` Peter Zijlstra
2017-06-09  8:16       ` Peter Zijlstra
2017-06-26 20:07       ` Palmer Dabbelt
2017-06-06 23:00   ` [PATCH 14/17] RISC-V: lib files Palmer Dabbelt
2017-06-06 23:00   ` [PATCH 15/17] RISC-V: Add mm subdirectory Palmer Dabbelt
2017-06-06 23:00   ` [PATCH 16/17] RISC-V: Add kernel subdirectory Palmer Dabbelt
2017-06-06 23:00   ` [PATCH 17/17] RISC-V: Makefile and Kconfig Palmer Dabbelt
2017-06-07  9:23   ` RISC-V Linux Port v2 Will Deacon
2017-06-07 21:54     ` Palmer Dabbelt
2017-06-08 10:26       ` Will Deacon
2017-06-08 18:16         ` Palmer Dabbelt
2017-06-28 18:55   ` RISC-V Linux Port v3 Palmer Dabbelt
2017-06-28 18:55     ` [PATCH 1/9] RISC-V: Init and Halt Code Palmer Dabbelt
2017-06-29  9:44       ` Geert Uytterhoeven
2017-06-29 22:52         ` Palmer Dabbelt
2017-06-28 18:55     ` [PATCH 2/9] RISC-V: Atomic and Locking Code Palmer Dabbelt
2017-06-28 18:55     ` [PATCH 3/9] RISC-V: Generic library routines and assembly Palmer Dabbelt
2017-06-28 18:55     ` [PATCH 4/9] RISC-V: ELF and module implementation Palmer Dabbelt
2017-06-28 18:55     ` [PATCH 5/9] RISC-V: Task implementation Palmer Dabbelt
2017-06-28 23:32       ` James Hogan
2017-06-29 22:52         ` Palmer Dabbelt
2017-06-29  8:22       ` Tobias Klauser
2017-06-29 22:52         ` Palmer Dabbelt
2017-06-28 18:55     ` [PATCH 6/9] RISC-V: Device, timer, IRQs, and the SBI Palmer Dabbelt
2017-06-29  8:39       ` Tobias Klauser
2017-06-29 22:52         ` Palmer Dabbelt
2017-06-30  7:57           ` Tobias Klauser
2017-06-28 18:55     ` [PATCH 7/9] RISC-V: Paging and MMU Palmer Dabbelt
2017-06-28 23:09       ` James Hogan
2017-06-29 22:11         ` Palmer Dabbelt
2017-06-28 18:55     ` [PATCH 8/9] RISC-V: User-facing API Palmer Dabbelt
2017-06-28 21:49       ` Thomas Gleixner
2017-06-28 21:52         ` Thomas Gleixner
2017-06-29 17:22         ` Palmer Dabbelt
2017-06-28 22:42       ` James Hogan
2017-06-29 21:42         ` Palmer Dabbelt
2017-07-03 23:06           ` James Hogan
2017-07-05 16:49             ` Palmer Dabbelt
2017-06-28 18:55     ` [PATCH 9/9] RISC-V: Build Infastructure Palmer Dabbelt
2017-06-28 21:05       ` Karsten Merker
2017-06-28 21:13         ` Palmer Dabbelt
2017-06-28 21:25       ` James Hogan
2017-06-29 16:29         ` Palmer Dabbelt
2017-06-28 22:54       ` James Hogan
2017-06-29 22:11         ` Palmer Dabbelt
2017-06-07  7:29 ` RISC-V Linux Port v2 David Howells
2017-06-07 21:54   ` Palmer Dabbelt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170523004107.536-6-palmer@dabbelt.com \
    --to=palmer@dabbelt.com \
    --cc=albert@sifive.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®