From: Palmer Dabbelt <palmer@dabbelt.com>
To: linux-arch@vger.kernel.org
To: linux-kernel@vger.kernel.org
To: Arnd Bergmann <arnd@arndb.de>
To: olof@lixom.net
Cc: albert@sifive.com
Cc: patches@groups.riscv.org
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Subject: [PATCH 10/17] irqchip: New RISC-V PLIC Driver
Date: Tue, 6 Jun 2017 16:00:00 -0700 [thread overview]
Message-ID: <20170606230007.19101-11-palmer@dabbelt.com> (raw)
In-Reply-To: <20170606230007.19101-1-palmer@dabbelt.com>
This patch adds a driver for the Platform Level Interrupt Controller
(PLIC) specified as part of the RISC-V supervisor level ISA manual.
The PLIC connocts global interrupt sources to the local interrupt
controller on each hart. A PLIC is present on all RISC-V systems.
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
---
drivers/irqchip/Kconfig | 12 ++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-riscv-plic.c | 253 +++++++++++++++++++++++++++++++++++++++
3 files changed, 266 insertions(+)
create mode 100644 drivers/irqchip/irq-riscv-plic.c
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 478f8ace2664..2906d63934ef 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -301,3 +301,15 @@ config QCOM_IRQ_COMBINER
help
Say yes here to add support for the IRQ combiner devices embedded
in Qualcomm Technologies chips.
+
+config RISCV_PLIC
+ bool "Platform-Level Interrupt Controller"
+ depends on RISCV
+ default y
+ help
+ This enables support for the PLIC chip found in standard RISC-V
+ systems. The PLIC is the top-most interrupt controller found in
+ the system, connected directly to the core complex. All other
+ interrupt sources (MSI, GPIO, etc) are subordinate to the PLIC.
+
+ If you don't know what to do here, say Y.
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index b64c59b838a0..bed94cc89146 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -76,3 +76,4 @@ obj-$(CONFIG_EZNPS_GIC) += irq-eznps.o
obj-$(CONFIG_ARCH_ASPEED) += irq-aspeed-vic.o
obj-$(CONFIG_STM32_EXTI) += irq-stm32-exti.o
obj-$(CONFIG_QCOM_IRQ_COMBINER) += qcom-irq-combiner.o
+obj-$(CONFIG_RISCV_PLIC) += irq-riscv-plic.o
diff --git a/drivers/irqchip/irq-riscv-plic.c b/drivers/irqchip/irq-riscv-plic.c
new file mode 100644
index 000000000000..906c8a62a911
--- /dev/null
+++ b/drivers/irqchip/irq-riscv-plic.c
@@ -0,0 +1,253 @@
+/*
+ * Copyright (C) 2017 SiFive
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+
+/* From the RISC-V Privlidged Spec v1.10:
+ *
+ * Global interrupt sources are assigned small unsigned integer identifiers,
+ * beginning at the value 1. An interrupt ID of 0 is reserved to mean “no
+ * interrupt”. Interrupt identifiers are also used to break ties when two or
+ * more interrupt sources have the same assigned priority. Smaller values of
+ * interrupt ID take precedence over larger values of interrupt ID.
+ *
+ * It's not defined what the largest device ID is, so we're just fixing
+ * MAX_DEVICES right here (which is named oddly, as there will never be a
+ * device 0).
+ */
+#define MAX_DEVICES 1024
+#define MAX_CONTEXTS 15872
+
+#define PRIORITY_BASE 0
+#define ENABLE_BASE 0x2000
+#define ENABLE_SIZE 0x80
+#define HART_BASE 0x200000
+#define HART_SIZE 0x1000
+
+struct plic_hart_context {
+ u32 threshold;
+ u32 claim;
+};
+
+struct plic_enable_context {
+ atomic_t mask[32]; // 32-bit * 32-entry
+};
+
+struct plic_priority {
+ u32 prio[MAX_DEVICES];
+};
+
+struct plic_data {
+ struct irq_chip chip;
+ struct irq_domain *domain;
+ u32 ndev;
+ void __iomem *reg;
+ int handlers;
+ struct plic_handler *handler;
+ char name[30];
+};
+
+struct plic_handler {
+ struct plic_hart_context *context;
+ struct plic_data *data;
+};
+
+static inline
+struct plic_hart_context *plic_hart_context(struct plic_data *data, size_t i)
+{
+ return (struct plic_hart_context *)((char *)data->reg + HART_BASE + HART_SIZE*i);
+}
+
+static inline
+struct plic_enable_context *plic_enable_context(struct plic_data *data, size_t i)
+{
+ return (struct plic_enable_context *)((char *)data->reg + ENABLE_BASE + ENABLE_SIZE*i);
+}
+
+static inline
+struct plic_priority *plic_priority(struct plic_data *data)
+{
+ return (struct plic_priority *)((char *)data->reg + PRIORITY_BASE);
+}
+
+static void plic_disable(struct plic_data *data, int i, int hwirq)
+{
+ struct plic_enable_context *enable = plic_enable_context(data, i);
+
+ atomic_and(~(1 << (hwirq % 32)), &enable->mask[hwirq / 32]);
+}
+
+static void plic_enable(struct plic_data *data, int i, int hwirq)
+{
+ struct plic_enable_context *enable = plic_enable_context(data, i);
+
+ atomic_or((1 << (hwirq % 32)), &enable->mask[hwirq / 32]);
+}
+
+// There is no need to mask/unmask PLIC interrupts
+// They are "masked" by reading claim and "unmasked" when writing it back.
+static void plic_irq_mask(struct irq_data *d) { }
+static void plic_irq_unmask(struct irq_data *d) { }
+
+static void plic_irq_enable(struct irq_data *d)
+{
+ struct plic_data *data = irq_data_get_irq_chip_data(d);
+ struct plic_priority *priority = plic_priority(data);
+ int i;
+
+ iowrite32(1, &priority->prio[d->hwirq]);
+ for (i = 0; i < data->handlers; ++i)
+ if (data->handler[i].context)
+ plic_enable(data, i, d->hwirq);
+}
+
+static void plic_irq_disable(struct irq_data *d)
+{
+ struct plic_data *data = irq_data_get_irq_chip_data(d);
+ struct plic_priority *priority = plic_priority(data);
+ int i;
+
+ iowrite32(0, &priority->prio[d->hwirq]);
+ for (i = 0; i < data->handlers; ++i)
+ if (data->handler[i].context)
+ plic_disable(data, i, d->hwirq);
+}
+
+static int plic_irqdomain_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ struct plic_data *data = d->host_data;
+
+ irq_set_chip_and_handler(irq, &data->chip, handle_simple_irq);
+ irq_set_chip_data(irq, data);
+ irq_set_noprobe(irq);
+
+ return 0;
+}
+
+static const struct irq_domain_ops plic_irqdomain_ops = {
+ .map = plic_irqdomain_map,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static void plic_chained_handle_irq(struct irq_desc *desc)
+{
+ struct plic_handler *handler = irq_desc_get_handler_data(desc);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct irq_domain *domain = handler->data->domain;
+ u32 what;
+
+ chained_irq_enter(chip, desc);
+
+ while ((what = ioread32(&handler->context->claim))) {
+ int irq = irq_find_mapping(domain, what);
+
+ if (irq > 0)
+ generic_handle_irq(irq);
+ else
+ handle_bad_irq(desc);
+ iowrite32(what, &handler->context->claim);
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+static int plic_init(struct device_node *node, struct device_node *parent)
+{
+ struct plic_data *data;
+ struct resource resource;
+ int i, ok = 0;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (WARN_ON(!data))
+ return -ENOMEM;
+
+ data->reg = of_iomap(node, 0);
+ if (WARN_ON(!data->reg))
+ return -EIO;
+
+ of_property_read_u32(node, "riscv,ndev", &data->ndev);
+ if (WARN_ON(!data->ndev))
+ return -EINVAL;
+
+ data->handlers = of_irq_count(node);
+ if (WARN_ON(!data->handlers))
+ return -EINVAL;
+
+ data->handler =
+ kcalloc(data->handlers, sizeof(*data->handler), GFP_KERNEL);
+ if (WARN_ON(!data->handler))
+ return -ENOMEM;
+
+ data->domain = irq_domain_add_linear(node, data->ndev+1, &plic_irqdomain_ops, data);
+ if (WARN_ON(!data->domain))
+ return -ENOMEM;
+
+ of_address_to_resource(node, 0, &resource);
+ snprintf(data->name, sizeof(data->name),
+ "riscv,plic0,%llx", resource.start);
+ data->chip.name = data->name;
+ data->chip.irq_mask = plic_irq_mask;
+ data->chip.irq_unmask = plic_irq_unmask;
+ data->chip.irq_enable = plic_irq_enable;
+ data->chip.irq_disable = plic_irq_disable;
+
+ for (i = 0; i < data->handlers; ++i) {
+ struct plic_handler *handler = &data->handler[i];
+ struct of_phandle_args parent;
+ int parent_irq, hwirq;
+
+ if (of_irq_parse_one(node, i, &parent))
+ continue;
+ // skip context holes
+ if (parent.args[0] == -1)
+ continue;
+
+ // skip any contexts that lead to inactive harts
+ if (of_device_is_compatible(parent.np, "riscv,cpu-intc") &&
+ parent.np->parent &&
+ riscv_of_processor_hart(parent.np->parent) < 0)
+ continue;
+
+ parent_irq = irq_create_of_mapping(&parent);
+ if (!parent_irq)
+ continue;
+
+ handler->context = plic_hart_context(data, i);
+ handler->data = data;
+ // hwirq prio must be > this to trigger an interrupt
+ iowrite32(0, &handler->context->threshold);
+
+ for (hwirq = 1; hwirq <= data->ndev; ++hwirq)
+ plic_disable(data, i, hwirq);
+ irq_set_chained_handler_and_data(parent_irq, plic_chained_handle_irq, handler);
+ ++ok;
+ }
+
+ printk(KERN_INFO "%s: mapped %d interrupts to %d/%d handlers\n",
+ data->name, data->ndev, ok, data->handlers);
+ WARN_ON(!ok);
+ return 0;
+}
+
+IRQCHIP_DECLARE(plic0, "riscv,plic0", plic_init);
--
2.13.0
next prev parent reply other threads:[~2017-06-06 23:02 UTC|newest]
Thread overview: 200+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-23 0:41 RISC-V Linux Port v1 Palmer Dabbelt
2017-05-23 0:41 ` [PATCH 1/7] RISC-V: Top-Level Makefile for riscv{32,64} Palmer Dabbelt
2017-05-23 11:30 ` Arnd Bergmann
2017-05-27 0:57 ` Palmer Dabbelt
2017-05-29 10:50 ` Arnd Bergmann
2017-06-06 4:56 ` Palmer Dabbelt
2017-06-06 17:39 ` Karsten Merker
2017-06-06 17:57 ` Palmer Dabbelt
2017-05-23 0:41 ` [PATCH 2/7] RISC-V: arch/riscv Makefile and Kconfigs Palmer Dabbelt
2017-05-23 1:27 ` Olof Johansson
2017-05-23 1:31 ` Randy Dunlap
2017-05-23 4:49 ` Palmer Dabbelt
2017-05-23 4:49 ` Palmer Dabbelt
2017-05-23 5:16 ` [patches] " Olof Johansson
2017-05-23 21:07 ` Benjamin Herrenschmidt
2017-05-23 5:23 ` Olof Johansson
2017-05-23 15:29 ` Palmer Dabbelt
2017-05-23 10:51 ` Geert Uytterhoeven
2017-05-25 1:59 ` Palmer Dabbelt
2017-05-23 11:46 ` Arnd Bergmann
2017-05-27 0:57 ` Palmer Dabbelt
2017-05-29 11:17 ` Arnd Bergmann
2017-06-06 4:56 ` Palmer Dabbelt
2017-06-06 9:20 ` Arnd Bergmann
2017-06-06 20:38 ` Palmer Dabbelt
2017-05-23 0:41 ` [PATCH 3/7] RISC-V: Device Tree Documentation Palmer Dabbelt
2017-05-23 12:03 ` Arnd Bergmann
2017-05-27 0:57 ` Palmer Dabbelt
2017-05-23 0:41 ` [PATCH 4/7] RISC-V: arch/riscv/include Palmer Dabbelt
2017-05-23 12:55 ` Arnd Bergmann
2017-05-23 21:23 ` Benjamin Herrenschmidt
2017-06-03 2:00 ` Palmer Dabbelt
2017-06-01 0:56 ` Palmer Dabbelt
2017-06-01 9:00 ` Arnd Bergmann
2017-06-06 4:56 ` Palmer Dabbelt
2017-06-06 8:54 ` Arnd Bergmann
2017-06-06 19:07 ` Palmer Dabbelt
2017-05-23 0:41 ` [PATCH 5/7] RISC-V: arch/riscv/lib Palmer Dabbelt
2017-05-23 10:47 ` Geert Uytterhoeven
2017-05-23 22:07 ` Palmer Dabbelt
2017-05-23 11:19 ` Arnd Bergmann
2017-05-25 1:59 ` Palmer Dabbelt
2017-05-26 9:06 ` Arnd Bergmann
2017-06-06 4:56 ` Palmer Dabbelt
2017-06-06 9:31 ` Arnd Bergmann
2017-06-06 20:53 ` Palmer Dabbelt
2017-06-07 7:35 ` Arnd Bergmann
2017-06-23 23:24 ` Palmer Dabbelt
2017-05-23 0:41 ` [PATCH 6/7] RISC-V: arch/riscv/kernel Palmer Dabbelt
2017-05-23 2:11 ` Olof Johansson
2017-05-25 1:59 ` Palmer Dabbelt
2017-05-25 19:51 ` Arnd Bergmann
2017-06-06 4:56 ` Palmer Dabbelt
2017-06-06 9:03 ` Arnd Bergmann
2017-06-06 20:38 ` Palmer Dabbelt
2017-05-23 13:35 ` Arnd Bergmann
2017-06-02 23:56 ` Palmer Dabbelt
2017-06-06 9:01 ` Arnd Bergmann
2017-06-06 20:37 ` Palmer Dabbelt
2017-05-25 17:05 ` Pavel Machek
2017-06-03 3:32 ` Palmer Dabbelt
2017-05-23 0:41 ` [PATCH 7/7] RISC-V: arch/riscv/mm Palmer Dabbelt
2017-05-23 1:28 ` Randy Dunlap
2017-05-23 2:17 ` Olof Johansson
2017-05-23 3:36 ` Palmer Dabbelt
2017-05-23 1:16 ` RISC-V Linux Port v1 Olof Johansson
2017-05-23 1:25 ` Randy Dunlap
2017-05-23 3:36 ` Palmer Dabbelt
2017-05-23 3:36 ` Palmer Dabbelt
2017-05-23 6:45 ` Tobias Klauser
2017-05-23 15:44 ` Palmer Dabbelt
2017-05-23 2:16 ` Randy Dunlap
2017-05-23 4:49 ` Palmer Dabbelt
2017-06-06 22:59 ` RISC-V Linux Port v2 Palmer Dabbelt
2017-06-06 22:59 ` [PATCH 01/17] drivers: support PCIe in RISCV Palmer Dabbelt
2017-06-07 7:17 ` Geert Uytterhoeven
2017-06-07 14:25 ` Christoph Hellwig
[not found] ` <CAMgXwTjXZ5dsxmJ2FyWhCRWo-3nyvKUDfhfV0nNC+oakF=AEsA@mail.gmail.com>
2017-06-07 17:40 ` Olof Johansson
2017-06-23 21:47 ` [patches] " Palmer Dabbelt
2017-06-06 22:59 ` [PATCH 02/17] pcie-xilinx: add missing 5th legacy interrupt Palmer Dabbelt
2017-06-07 7:18 ` Geert Uytterhoeven
2017-06-07 9:24 ` Marc Zyngier
2017-06-07 19:03 ` Wesley Terpstra
2017-06-06 22:59 ` [PATCH 03/17] base: fix order of OF initialization Palmer Dabbelt
2017-06-07 7:07 ` Geert Uytterhoeven
2017-06-07 9:35 ` Mark Rutland
2017-06-07 18:39 ` Wesley Terpstra
2017-06-07 21:10 ` Benjamin Herrenschmidt
2017-06-08 3:49 ` Frank Rowand
2017-06-08 9:05 ` Mark Rutland
2017-06-09 0:37 ` Frank Rowand
2017-06-06 22:59 ` [PATCH 04/17] Documentation: atomic_ops.txt is core-api/atomic_ops.rst Palmer Dabbelt
2017-06-07 7:19 ` Geert Uytterhoeven
2017-06-07 9:20 ` Will Deacon
2017-06-06 22:59 ` [PATCH 05/17] MAINTAINERS: Add RISC-V Palmer Dabbelt
2017-06-06 22:59 ` [PATCH 06/17] pci: Add generic pcibios_{fixup_bus,align_resource} Palmer Dabbelt
2017-06-07 7:19 ` Geert Uytterhoeven
2017-06-07 8:01 ` Arnd Bergmann
2017-06-24 2:01 ` Palmer Dabbelt
2017-06-08 8:12 ` Christoph Hellwig
2017-06-08 8:35 ` Arnd Bergmann
2017-06-24 2:01 ` Palmer Dabbelt
2017-06-06 22:59 ` [PATCH 07/17] lib: Add shared copies of some GCC library routines Palmer Dabbelt
2017-06-06 22:59 ` [PATCH 08/17] dts: include documentation for the RISC-V interrupt controllers Palmer Dabbelt
2017-06-07 7:11 ` Geert Uytterhoeven
2017-06-07 10:13 ` Mark Rutland
2017-06-07 18:57 ` Wesley Terpstra
2017-06-07 19:57 ` Rob Herring
2017-06-07 20:31 ` Wesley Terpstra
2017-06-08 10:52 ` Mark Rutland
2017-06-09 21:46 ` Wesley Terpstra
2017-06-09 21:58 ` Wesley Terpstra
2017-06-19 14:30 ` Mark Rutland
2017-06-07 22:27 ` Luis R. Rodriguez
2017-06-06 22:59 ` [PATCH 09/17] clocksource/timer-riscv: New RISC-V Clocksource Palmer Dabbelt
2017-06-07 7:12 ` Geert Uytterhoeven
2017-06-07 7:25 ` Arnd Bergmann
2017-06-23 23:24 ` Palmer Dabbelt
2017-06-07 9:43 ` Marc Zyngier
2017-06-24 2:02 ` Palmer Dabbelt
2017-06-06 23:00 ` Palmer Dabbelt [this message]
2017-06-07 7:13 ` [PATCH 10/17] irqchip: New RISC-V PLIC Driver Geert Uytterhoeven
2017-06-07 7:55 ` Arnd Bergmann
2017-06-24 0:45 ` Palmer Dabbelt
2017-06-07 10:52 ` Marc Zyngier
2017-06-09 13:47 ` Will Deacon
2017-06-27 1:09 ` Palmer Dabbelt
2017-06-25 20:49 ` Palmer Dabbelt
2017-06-06 23:00 ` [PATCH 11/17] irqchip: RISC-V Local Interrupt Controller Driver Palmer Dabbelt
2017-06-07 7:14 ` Geert Uytterhoeven
2017-06-06 23:00 ` [PATCH 12/17] tty: New RISC-V SBI Console Driver Palmer Dabbelt
2017-06-07 7:15 ` Geert Uytterhoeven
2017-06-07 7:58 ` Arnd Bergmann
2017-06-24 0:45 ` Palmer Dabbelt
2017-06-06 23:00 ` [PATCH 13/17] RISC-V: Add include subdirectory Palmer Dabbelt
2017-06-07 8:12 ` Arnd Bergmann
2017-06-24 2:01 ` Palmer Dabbelt
2017-06-24 15:42 ` Benjamin Herrenschmidt
2017-06-24 21:32 ` [patches] " Palmer Dabbelt
2017-06-25 3:01 ` Benjamin Herrenschmidt
2017-06-07 11:54 ` Peter Zijlstra
2017-06-07 12:25 ` Peter Zijlstra
2017-06-07 12:06 ` Peter Zijlstra
2017-06-07 12:18 ` Peter Zijlstra
2017-06-07 12:36 ` Peter Zijlstra
2017-06-07 12:58 ` Peter Zijlstra
2017-06-07 13:16 ` Will Deacon
2017-06-26 20:07 ` Palmer Dabbelt
2017-06-27 0:07 ` Daniel Lustig
2017-06-27 8:48 ` Will Deacon
2017-06-07 16:35 ` Peter Zijlstra
2017-06-26 20:07 ` Palmer Dabbelt
2017-06-07 12:42 ` Peter Zijlstra
2017-06-07 13:17 ` Peter Zijlstra
2017-06-09 8:16 ` Peter Zijlstra
2017-06-26 20:07 ` Palmer Dabbelt
2017-06-06 23:00 ` [PATCH 14/17] RISC-V: lib files Palmer Dabbelt
2017-06-06 23:00 ` [PATCH 15/17] RISC-V: Add mm subdirectory Palmer Dabbelt
2017-06-06 23:00 ` [PATCH 16/17] RISC-V: Add kernel subdirectory Palmer Dabbelt
2017-06-06 23:00 ` [PATCH 17/17] RISC-V: Makefile and Kconfig Palmer Dabbelt
2017-06-07 9:23 ` RISC-V Linux Port v2 Will Deacon
2017-06-07 21:54 ` Palmer Dabbelt
2017-06-08 10:26 ` Will Deacon
2017-06-08 18:16 ` Palmer Dabbelt
2017-06-28 18:55 ` RISC-V Linux Port v3 Palmer Dabbelt
2017-06-28 18:55 ` [PATCH 1/9] RISC-V: Init and Halt Code Palmer Dabbelt
2017-06-29 9:44 ` Geert Uytterhoeven
2017-06-29 22:52 ` Palmer Dabbelt
2017-06-28 18:55 ` [PATCH 2/9] RISC-V: Atomic and Locking Code Palmer Dabbelt
2017-06-28 18:55 ` [PATCH 3/9] RISC-V: Generic library routines and assembly Palmer Dabbelt
2017-06-28 18:55 ` [PATCH 4/9] RISC-V: ELF and module implementation Palmer Dabbelt
2017-06-28 18:55 ` [PATCH 5/9] RISC-V: Task implementation Palmer Dabbelt
2017-06-28 23:32 ` James Hogan
2017-06-29 22:52 ` Palmer Dabbelt
2017-06-29 8:22 ` Tobias Klauser
2017-06-29 22:52 ` Palmer Dabbelt
2017-06-28 18:55 ` [PATCH 6/9] RISC-V: Device, timer, IRQs, and the SBI Palmer Dabbelt
2017-06-29 8:39 ` Tobias Klauser
2017-06-29 22:52 ` Palmer Dabbelt
2017-06-30 7:57 ` Tobias Klauser
2017-06-28 18:55 ` [PATCH 7/9] RISC-V: Paging and MMU Palmer Dabbelt
2017-06-28 23:09 ` James Hogan
2017-06-29 22:11 ` Palmer Dabbelt
2017-06-28 18:55 ` [PATCH 8/9] RISC-V: User-facing API Palmer Dabbelt
2017-06-28 21:49 ` Thomas Gleixner
2017-06-28 21:52 ` Thomas Gleixner
2017-06-29 17:22 ` Palmer Dabbelt
2017-06-28 22:42 ` James Hogan
2017-06-29 21:42 ` Palmer Dabbelt
2017-07-03 23:06 ` James Hogan
2017-07-05 16:49 ` Palmer Dabbelt
2017-06-28 18:55 ` [PATCH 9/9] RISC-V: Build Infastructure Palmer Dabbelt
2017-06-28 21:05 ` Karsten Merker
2017-06-28 21:13 ` Palmer Dabbelt
2017-06-28 21:25 ` James Hogan
2017-06-29 16:29 ` Palmer Dabbelt
2017-06-28 22:54 ` James Hogan
2017-06-29 22:11 ` Palmer Dabbelt
2017-06-07 7:29 ` RISC-V Linux Port v2 David Howells
2017-06-07 21:54 ` Palmer Dabbelt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170606230007.19101-11-palmer@dabbelt.com \
--to=palmer@dabbelt.com \
--cc=albert@sifive.com \
--cc=linux-arch@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®