mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Alan Stern <stern@rowland.harvard.edu>,
	Bjorn Helgaas <bhelgaas@google.com>,
	gregkh@linuxfoundation.org, USB list <linux-usb@vger.kernel.org>,
	linux-pci@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>,
	"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>,
	linux-pm@vger.kernel.org
Subject: Re: [PATCH] usb: host: ehci: workaround PME bug on AMD EHCI controller
Date: Tue, 13 Jun 2017 12:28:49 -0500	[thread overview]
Message-ID: <20170613172849.GA7012@bhelgaas-glaptop.roam.corp.google.com> (raw)
In-Reply-To: <CAAd53p580X5_G6a05aAueHVxEoy5hpQrs6s2gtJA+gPEf2PqLg@mail.gmail.com>

[+cc Rafael, linux-pm]

On Tue, Jun 13, 2017 at 12:21:15PM +0800, Kai-Heng Feng wrote:
> On Mon, Jun 12, 2017 at 10:18 PM, Alan Stern <stern@rowland.harvard.edu> wrote:
> > Let's get some help from people who understand PCI well.
> >
> > Here's the general problem: Kai-Heng has a PCI-based USB host
> > controller that advertises wakeup capability from D3, but it doesn't
> > assert PME# from D3 when it should.  For "lspci -vv" output, see
> >
> >         http://marc.info/?l=linux-usb&m=149570231732519&w=2
> >
> > On Mon, 12 Jun 2017, Kai-Heng Feng wrote:
> >
> >> On Mon, Jun 12, 2017 at 3:04 PM, Kai-Heng Feng
> >> <kai.heng.feng@canonical.com> wrote:
> >> > On Fri, Jun 9, 2017 at 10:43 PM, Alan Stern <stern@rowland.harvard.edu> wrote:
> >> >> On Fri, 9 Jun 2017, Kai-Heng Feng wrote:
> >> >>
> >> >> Is this really the right solution?  Maybe it would be better to allow
> >> >> the controller to go into D3 provided no wakeup signal is needed.  You
> >> >> could do:
> >> >>
> >> >>                 device_set_wakeup_capable(&pdev->dev, 0);
> >> >
> >> > This doesn't work.
> >> > After applying this function, still nothing happens when devices get plugged in.
> >> > IIUC this function disable the wakeup function, but what I want to do
> >> > here is to have PME signal works even when runtime PM is enabled.
> >
> > This may indicate a bug in either the PCI or USB stacks (or both!).  If
> > a driver requires wakeup capability from runtime suspend but the device
> > does not provide it, the PCI core should not allow the device to go
> > into runtime suspend.  Or is that the driver's responsibility?
> >
> >> > I also saw some legacy PCI PM stuff, so I also tried:
> >> > device_set_wakeup_capable(&pdev->dev, 1);
> >> > ...doesn't work either.
> >> >
> >> >>
> >> >> Another alternative is to put the controller into D2 instead of D3, but
> >> >> (1) I don't know how to do that, and (2) we don't know if wakeup
> >> >> signalling works any better in D2 than it does in D3.
> >> >
> >> > I'll try if D2 works.
> >>
> >> Put the device into D2 instead of D3 can make the wakeup signaling
> >> work, i.e. USB devices can be correctly detected after plugged into
> >> EHCI port.
> >>
> >> Do you think this alternative an acceptable workaround?
> >
> > Yes, it is.  The difficulty is that I don't know how to tell the PCI
> > core that the device should go in D2 during runtime suspend instead of
> > D3.  Some sort of quirk may be needed -- perhaps Bjorn can help.
> >
> 
> FWIW, this is the diff I used to make the controller transits to D2
> instead of D3:
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 563901cd9c06..36663688404a 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -922,6 +922,9 @@ int pci_set_power_state(struct pci_dev *dev,
> pci_power_t state)
>         if (dev->current_state == state)
>                 return 0;
> 
> +       if (state > PCI_D2 && (dev->dev_flags & PCI_DEV_FLAGS_MAX_D2))
> +               state = PCI_D2;
> +
>         __pci_start_power_transition(dev, state);
> 
>         /* This device is quirked not to be put into D3, so
> diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
> index 93326974ff4b..a2c1fe62974a 100644
> --- a/drivers/usb/host/ehci-pci.c
> +++ b/drivers/usb/host/ehci-pci.c
> @@ -181,6 +181,8 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
>                 if (pdev->device == 0x7808) {
>                         ehci->use_dummy_qh = 1;
>                         ehci_info(ehci, "applying AMD
> SB700/SB800/Hudson-2/3 EHCI dummy qh workaround\n");
> +
> +                       pdev->dev_flags |= PCI_DEV_FLAGS_MAX_D2;
>                 }
>                 break;
>         case PCI_VENDOR_ID_VIA:
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 8039f9f0ca05..6f86f2aa8548 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -188,6 +188,7 @@ enum pci_dev_flags {
>          * the direct_complete optimization.
>          */
>         PCI_DEV_FLAGS_NEEDS_RESUME = (__force pci_dev_flags_t) (1 << 11),
> +       PCI_DEV_FLAGS_MAX_D2 = (__force pci_dev_flags_t) (1 << 12),
>  };
> 
>  enum pci_irq_reroute_variant {

The lspci output [1] shows:

  00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 39) (prog-if 20 [EHCI])
    Capabilities: [c0] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D3 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
      Bridge: PM- B3+

The device claims it can assert PME# from D3hot.  If it can't, that
sounds like a hardware defect that should be addressed with a quirk.
Ideally we would also have a pointer to the AMD hardware erratum.

Is the following path involved here?

  pci_finish_runtime_suspend
    target_state = pci_target_state()
      if (device_may_wakup())
	if (dev->pme_support)
	  ...
    pci_set_power_state(..., target_state)

If so, I would naively expect that a quirk could clear the
PCI_PM_CAP_PME_D3 and PCI_PM_CAP_PME_D3cold bits in dev->pme_support,
and pci_target_state() would then avoid selecting D3 or D3cold.  But
I'm not an expert in power management.

Bjorn

[1] http://marc.info/?l=linux-usb&m=149570231732519&w=2

  reply	other threads:[~2017-06-13 17:28 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-09  7:22 Kai-Heng Feng
2017-06-09 14:43 ` Alan Stern
2017-06-12  7:04   ` Kai-Heng Feng
2017-06-12 10:12     ` Kai-Heng Feng
2017-06-12 14:18       ` Alan Stern
2017-06-13  4:21         ` Kai-Heng Feng
2017-06-13 17:28           ` Bjorn Helgaas [this message]
2017-06-14 18:55             ` Alan Stern
2017-06-15  7:02               ` Kai-Heng Feng
2017-06-15 13:23                 ` Bjorn Helgaas
2017-06-15  6:57             ` Kai-Heng Feng
2017-06-15 14:12               ` Alan Stern
2017-06-16  3:07                 ` Kai-Heng Feng
2017-06-16 16:18                   ` Kai-Heng Feng
2017-06-16 17:30                     ` Alan Stern
2017-06-19  3:30                       ` Kai-Heng Feng
2017-06-19 17:45                         ` Bjorn Helgaas
2017-06-19 18:32                           ` Alan Stern
2017-06-19 22:00                             ` Rafael J. Wysocki
2017-06-20  2:36                             ` Kai-Heng Feng
2017-06-23  0:48                             ` [PATCH] PCI / PM: Avoid using device_may_wakeup() for runtime PM Rafael J. Wysocki
2017-06-23 12:58                               ` [PATCH v2] " Rafael J. Wysocki
2017-06-29 22:37                                 ` Rafael J. Wysocki
2017-06-30  8:44                                   ` Mika Westerberg
2017-06-30 16:16                                 ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170613172849.GA7012@bhelgaas-glaptop.roam.corp.google.com \
    --to=helgaas@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kai.heng.feng@canonical.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=rafael.j.wysocki@intel.com \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®