From: Quentin Schulz <quentin.schulz@free-electrons.com>
To: mturquette@baylibre.com, sboyd@codeaurora.org,
robh+dt@kernel.org, mark.rutland@arm.com,
nicolas.ferre@microchip.com,
alexandre.belloni@free-electrons.com, linux@armlinux.org.uk,
boris.brezillon@free-electrons.com, lgirdwood@gmail.com,
broonie@kernel.org, perex@perex.cz, tiwai@suse.com
Cc: Quentin Schulz <quentin.schulz@free-electrons.com>,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
alsa-devel@alsa-project.org, thomas.petazzoni@free-electrons.com
Subject: [PATCH 0/6] add support for Sama5d2 audio PLL and enable ClassD
Date: Fri, 23 Jun 2017 11:00:53 +0200 [thread overview]
Message-ID: <20170623090059.8371-1-quentin.schulz@free-electrons.com> (raw)
This patch series adds support for the audio PLL and enables ClassD that
can be found in ATMEL Sama5d2 SoCs.
There are two audio PLLs (PMC and PAD) that shares the same parent (FRAC).
FRAC can output between 620 and 700MHz and only multiply the rate of its
parent. The two audio PLLs then divide the FRAC rate to best match the
asked rate.
I basically took an old patch series posted by Nicolas on December, 6th
2016[1][2][3] and the comments Boris did on the first version[4] Nicolas
sent on July, 15th 2015.
I also fixed the function used to compute the divisors, removed useless
spinlocks and added a range to the audio frac PLL to stay within vendor's
supported range. Clocks that are children of gclk (generated-clk) are now
able to propagate rate to the audio PLL clocks when needed. However, since
there is no rate locking, we enforce that classd_gclk be the only child of
audio_pll_pmc so we avoid multiple children modifiying parent's rate, and
classd driver modifying parent's rate which would impact the rate of each
of parent's children.
Thanks,
Quentin
[1] https://patchwork.kernel.org/patch/9462351/
[2] https://patchwork.kernel.org/patch/9462347/
[3] https://patchwork.kernel.org/patch/9462349/
[4] https://www.spinics.net/lists/arm-kernel/msg436120.html
Cyrille Pitchen (2):
ARM: dts: at91: sama5d2: add classd nodes
ARM: dts: at91: sama5d2_xplained: add pin muxing and enable classd
Nicolas Ferre (1):
clk: at91: add audio pll clock driver
Quentin Schulz (3):
clk: at91: clk-generated: remove useless divisor loop
clk: at91: clk-generated: create function to find best_diff
clk: at91: clk-generated: make gclk determine audio_pll rate
.../devicetree/bindings/clock/at91-clock.txt | 10 +
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 16 ++
arch/arm/boot/dts/sama5d2.dtsi | 39 +++-
arch/arm/mach-at91/Kconfig | 4 +
drivers/clk/at91/Makefile | 2 +
drivers/clk/at91/clk-audio-pll-pad.c | 204 ++++++++++++++++++
drivers/clk/at91/clk-audio-pll-pmc.c | 175 +++++++++++++++
drivers/clk/at91/clk-audio-pll.c | 237 +++++++++++++++++++++
drivers/clk/at91/clk-generated.c | 79 +++++--
include/linux/clk/at91_pmc.h | 25 +++
sound/soc/atmel/atmel-classd.c | 20 +-
11 files changed, 772 insertions(+), 39 deletions(-)
create mode 100644 drivers/clk/at91/clk-audio-pll-pad.c
create mode 100644 drivers/clk/at91/clk-audio-pll-pmc.c
create mode 100644 drivers/clk/at91/clk-audio-pll.c
--
2.11.0
next reply other threads:[~2017-06-23 9:02 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-23 9:00 Quentin Schulz [this message]
2017-06-23 9:00 ` [PATCH 1/6] clk: at91: clk-generated: remove useless divisor loop Quentin Schulz
2017-07-03 13:58 ` Boris Brezillon
2017-06-23 9:00 ` [PATCH 2/6] clk: at91: add audio pll clock driver Quentin Schulz
2017-06-23 15:39 ` Alexandre Belloni
2017-06-29 21:47 ` Rob Herring
2017-06-29 22:11 ` Alexandre Belloni
2017-07-03 14:01 ` Boris Brezillon
2017-06-23 9:00 ` [PATCH 3/6] ARM: dts: at91: sama5d2: add classd nodes Quentin Schulz
2017-06-23 9:00 ` [PATCH 4/6] clk: at91: clk-generated: create function to find best_diff Quentin Schulz
2017-07-03 14:02 ` Boris Brezillon
2017-06-23 9:00 ` [PATCH 5/6] clk: at91: clk-generated: make gclk determine audio_pll rate Quentin Schulz
2017-07-03 14:19 ` Boris Brezillon
2017-06-23 9:00 ` [PATCH 6/6] ARM: dts: at91: sama5d2_xplained: add pin muxing and enable classd Quentin Schulz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170623090059.8371-1-quentin.schulz@free-electrons.com \
--to=quentin.schulz@free-electrons.com \
--cc=alexandre.belloni@free-electrons.com \
--cc=alsa-devel@alsa-project.org \
--cc=boris.brezillon@free-electrons.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=nicolas.ferre@microchip.com \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=thomas.petazzoni@free-electrons.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®