From: Quentin Schulz <quentin.schulz@free-electrons.com>
To: mturquette@baylibre.com, sboyd@codeaurora.org,
robh+dt@kernel.org, mark.rutland@arm.com,
nicolas.ferre@microchip.com,
alexandre.belloni@free-electrons.com, linux@armlinux.org.uk,
boris.brezillon@free-electrons.com, lgirdwood@gmail.com,
broonie@kernel.org, perex@perex.cz, tiwai@suse.com
Cc: Quentin Schulz <quentin.schulz@free-electrons.com>,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
alsa-devel@alsa-project.org, thomas.petazzoni@free-electrons.com
Subject: [PATCH 5/6] clk: at91: clk-generated: make gclk determine audio_pll rate
Date: Fri, 23 Jun 2017 11:00:58 +0200 [thread overview]
Message-ID: <20170623090059.8371-6-quentin.schulz@free-electrons.com> (raw)
In-Reply-To: <20170623090059.8371-1-quentin.schulz@free-electrons.com>
This allows gclk to determine audio_pll rate and set the parent rate
accordingly.
However, there are multiple children clocks that could technically
change the rate of audio_pll. Since the clock rate is usually critical
for IPs, it isn't a good idea to have multiple clocks changing audio_pll
clock rate. There isn't any rate locking system for the moment, thus
we enforce that classd_gclk be the only one allowed to change audio_pll
rate. To remain consistent, we deny other clocks to be children of
audio_pll so classd_gclk altering audio_pll rate does not impact any
other device.
This needs to be re-worked once we have a rate locking system so two
clocks could be children of the same clock and be sure the clock rate
isn't changed by one or the other.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
---
drivers/clk/at91/clk-generated.c | 41 ++++++++++++++++++++++++++++++++++------
1 file changed, 35 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c
index 6530a2e7e84d..e66ee735a569 100644
--- a/drivers/clk/at91/clk-generated.c
+++ b/drivers/clk/at91/clk-generated.c
@@ -26,6 +26,9 @@
#define GENERATED_SOURCE_MAX 6
#define GENERATED_MAX_DIV 255
+#define GCK_ID_CLASSD 59
+#define GCK_INDEX_DT_AUDIO_PLL 5
+
struct clk_generated {
struct clk_hw hw;
struct regmap *regmap;
@@ -126,15 +129,14 @@ static int clk_generated_determine_rate(struct clk_hw *hw,
{
struct clk_generated *gck = to_clk_generated(hw);
struct clk_hw *parent = NULL;
+ struct clk_rate_request req_parent = *req;
long best_rate = -EINVAL;
- unsigned long min_rate;
+ unsigned long min_rate, parent_rate;
int best_diff = -1;
int i;
+ u32 div;
- for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
- u32 div;
- unsigned long parent_rate;
-
+ for (i = 0; i < clk_hw_get_num_parents(hw) - 1; i++) {
parent = clk_hw_get_parent_by_index(hw, i);
if (!parent)
continue;
@@ -150,11 +152,37 @@ static int clk_generated_determine_rate(struct clk_hw *hw,
clk_generated_best_diff(req, parent, parent_rate, div,
&best_diff, &best_rate);
+ if (!best_diff)
+ break;
+ }
+
+ /*
+ * The audio_pll rate can be modified unlike the five others clocks that
+ * should never be altered.
+ * The audio_pll can technically be used by multiple consumers. However,
+ * they all are likely to want to modify its rate while the rate is
+ * critical for each one. Since we do not have a rate locking for the
+ * moment, let classd_gclk be the only consumer of the audio_pll clock.
+ */
+
+ if (gck->id != GCK_ID_CLASSD)
+ goto end;
+
+ parent = clk_hw_get_parent_by_index(hw, GCK_INDEX_DT_AUDIO_PLL);
+ if (!parent)
+ goto end;
+
+ for (div = 1; div < GENERATED_MAX_DIV + 2; div++) {
+ req_parent.rate = req->rate * div;
+ __clk_determine_rate(parent, &req_parent);
+ clk_generated_best_diff(req, parent, req_parent.rate, div,
+ &best_diff, &best_rate);
if (!best_diff)
break;
}
+end:
pr_debug("GCLK: %s, best_rate = %ld, parent clk: %s @ %ld\n",
__func__, best_rate,
__clk_get_name((req->best_parent_hw)->clk),
@@ -264,7 +292,8 @@ at91_clk_register_generated(struct regmap *regmap, spinlock_t *lock,
init.ops = &generated_ops;
init.parent_names = parent_names;
init.num_parents = num_parents;
- init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE;
+ init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
+ CLK_SET_RATE_PARENT;
gck->id = id;
gck->hw.init = &init;
--
2.11.0
next prev parent reply other threads:[~2017-06-23 9:01 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-23 9:00 [PATCH 0/6] add support for Sama5d2 audio PLL and enable ClassD Quentin Schulz
2017-06-23 9:00 ` [PATCH 1/6] clk: at91: clk-generated: remove useless divisor loop Quentin Schulz
2017-07-03 13:58 ` Boris Brezillon
2017-06-23 9:00 ` [PATCH 2/6] clk: at91: add audio pll clock driver Quentin Schulz
2017-06-23 15:39 ` Alexandre Belloni
2017-06-29 21:47 ` Rob Herring
2017-06-29 22:11 ` Alexandre Belloni
2017-07-03 14:01 ` Boris Brezillon
2017-06-23 9:00 ` [PATCH 3/6] ARM: dts: at91: sama5d2: add classd nodes Quentin Schulz
2017-06-23 9:00 ` [PATCH 4/6] clk: at91: clk-generated: create function to find best_diff Quentin Schulz
2017-07-03 14:02 ` Boris Brezillon
2017-06-23 9:00 ` Quentin Schulz [this message]
2017-07-03 14:19 ` [PATCH 5/6] clk: at91: clk-generated: make gclk determine audio_pll rate Boris Brezillon
2017-06-23 9:00 ` [PATCH 6/6] ARM: dts: at91: sama5d2_xplained: add pin muxing and enable classd Quentin Schulz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170623090059.8371-6-quentin.schulz@free-electrons.com \
--to=quentin.schulz@free-electrons.com \
--cc=alexandre.belloni@free-electrons.com \
--cc=alsa-devel@alsa-project.org \
--cc=boris.brezillon@free-electrons.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=nicolas.ferre@microchip.com \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=thomas.petazzoni@free-electrons.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®