* [PATCH] libnvdimm: fix badblock range handling of ARS range
@ 2017-07-07 23:44 Toshi Kani
2017-07-10 21:31 ` Vishal Verma
0 siblings, 1 reply; 2+ messages in thread
From: Toshi Kani @ 2017-07-07 23:44 UTC (permalink / raw)
To: dan.j.williams; +Cc: vishal.l.verma, linux-nvdimm, linux-kernel
__add_badblock_range() does not account sector alignment when
it sets 'num_sectors'. Therefore, an ARS error record range
spanning across two sectors is set to a single sector length,
which leaves the 2nd sector unprotected.
Change __add_badblock_range() to set 'num_sectors' properly.
Fixes: 0caeef63e6d2f866d85bb507bf63e0ce8ec91cef
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: <stable@vger.kernel.org>
---
drivers/nvdimm/core.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/nvdimm/core.c b/drivers/nvdimm/core.c
index 2dee908..932c3994 100644
--- a/drivers/nvdimm/core.c
+++ b/drivers/nvdimm/core.c
@@ -421,14 +421,15 @@ static void set_badblock(struct badblocks *bb, sector_t s, int num)
static void __add_badblock_range(struct badblocks *bb, u64 ns_offset, u64 len)
{
const unsigned int sector_size = 512;
- sector_t start_sector;
+ sector_t start_sector, end_sector;
u64 num_sectors;
u32 rem;
start_sector = div_u64(ns_offset, sector_size);
- num_sectors = div_u64_rem(len, sector_size, &rem);
+ end_sector = div_u64_rem(ns_offset + len, sector_size, &rem);
if (rem)
- num_sectors++;
+ end_sector++;
+ num_sectors = end_sector - start_sector;
if (unlikely(num_sectors > (u64)INT_MAX)) {
u64 remaining = num_sectors;
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] libnvdimm: fix badblock range handling of ARS range
2017-07-07 23:44 [PATCH] libnvdimm: fix badblock range handling of ARS range Toshi Kani
@ 2017-07-10 21:31 ` Vishal Verma
0 siblings, 0 replies; 2+ messages in thread
From: Vishal Verma @ 2017-07-10 21:31 UTC (permalink / raw)
To: Toshi Kani; +Cc: dan.j.williams, linux-nvdimm, linux-kernel
On 07/07, Toshi Kani wrote:
> __add_badblock_range() does not account sector alignment when
> it sets 'num_sectors'. Therefore, an ARS error record range
> spanning across two sectors is set to a single sector length,
> which leaves the 2nd sector unprotected.
>
> Change __add_badblock_range() to set 'num_sectors' properly.
>
> Fixes: 0caeef63e6d2f866d85bb507bf63e0ce8ec91cef
> Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
> Cc: Dan Williams <dan.j.williams@intel.com>
> Cc: Vishal Verma <vishal.l.verma@intel.com>
> Cc: <stable@vger.kernel.org>
> ---
> drivers/nvdimm/core.c | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
Good find! I don't know why I assumed a poison entry spanning past the
end of a sector wouldn't span past multiple sectors :)
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
>
> diff --git a/drivers/nvdimm/core.c b/drivers/nvdimm/core.c
> index 2dee908..932c3994 100644
> --- a/drivers/nvdimm/core.c
> +++ b/drivers/nvdimm/core.c
> @@ -421,14 +421,15 @@ static void set_badblock(struct badblocks *bb, sector_t s, int num)
> static void __add_badblock_range(struct badblocks *bb, u64 ns_offset, u64 len)
> {
> const unsigned int sector_size = 512;
> - sector_t start_sector;
> + sector_t start_sector, end_sector;
> u64 num_sectors;
> u32 rem;
>
> start_sector = div_u64(ns_offset, sector_size);
> - num_sectors = div_u64_rem(len, sector_size, &rem);
> + end_sector = div_u64_rem(ns_offset + len, sector_size, &rem);
> if (rem)
> - num_sectors++;
> + end_sector++;
> + num_sectors = end_sector - start_sector;
>
> if (unlikely(num_sectors > (u64)INT_MAX)) {
> u64 remaining = num_sectors;
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-07-10 21:32 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-07-07 23:44 [PATCH] libnvdimm: fix badblock range handling of ARS range Toshi Kani
2017-07-10 21:31 ` Vishal Verma
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®