mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Joel Stanley <joel@jms.id.au>
To: Lee Jones <lee.jones@linaro.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Andrew Jeffery <andrew@aj.id.au>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Jeremy Kerr <jk@ozlabs.org>, Rick Altherr <raltherr@google.com>,
	Ryan Chen <ryan_chen@aspeedtech.com>,
	Arnd Bergmann <arnd@arndb.de>
Subject: [PATCH v2 4/5] clk: aspeed: Register gated clocks
Date: Thu, 21 Sep 2017 13:56:40 +0930	[thread overview]
Message-ID: <20170921042641.7326-5-joel@jms.id.au> (raw)
In-Reply-To: <20170921042641.7326-1-joel@jms.id.au>

The majority of the clocks in the system are gates paired with a reset
controller that holds the IP in reset.

This borrows from clk_hw_register_gate, but registers two 'gates', one
to control the clock enable register and the other to control the reset
IP. This allows us to enforce the ordering:

 1. Place IP in reset
 2. Enable clock
 3. Delay
 4. Release reset

There are some gates that do not have an associated reset; these are
handled by using -1 as the index for the reset.

Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 drivers/clk/clk-aspeed.c | 128 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 128 insertions(+)

diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c
index 19531798e040..dec9db4ec47b 100644
--- a/drivers/clk/clk-aspeed.c
+++ b/drivers/clk/clk-aspeed.c
@@ -191,6 +191,108 @@ static struct clk_hw *aspeed_calc_pll(const char *name, u32 val)
 			mult, div);
 }
 
+static int aspeed_clk_enable(struct clk_hw *hw)
+{
+	struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
+	unsigned long flags;
+	u32 clk = BIT(gate->clock_idx);
+	u32 rst = BIT(gate->reset_idx);
+
+	spin_lock_irqsave(gate->lock, flags);
+
+	if (gate->reset_idx >= 0) {
+		/* Put IP in reset */
+		regmap_update_bits(gate->map, ASPEED_RESET_CTRL, rst, rst);
+
+		/* Delay 100us */
+		udelay(100);
+	}
+
+	/* Enable clock */
+	regmap_update_bits(gate->map, ASPEED_CLK_STOP_CTRL, clk, 0);
+
+	if (gate->reset_idx >= 0) {
+		/* Delay 10ms */
+		/* TODO: can we sleep here? */
+		msleep(10);
+
+		/* Take IP out of reset */
+		regmap_update_bits(gate->map, ASPEED_RESET_CTRL, rst, 0);
+	}
+
+	spin_unlock_irqrestore(gate->lock, flags);
+
+	return 0;
+}
+
+static void aspeed_clk_disable(struct clk_hw *hw)
+{
+	struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
+	unsigned long flags;
+	u32 clk = BIT(gate->clock_idx);
+
+	spin_lock_irqsave(gate->lock, flags);
+
+	/* Disable clock */
+	regmap_update_bits(gate->map, ASPEED_CLK_STOP_CTRL, clk, clk);
+
+	spin_unlock_irqrestore(gate->lock, flags);
+}
+
+static int aspeed_clk_is_enabled(struct clk_hw *hw)
+{
+	struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
+	u32 clk = BIT(gate->clock_idx);
+	u32 reg;
+
+	regmap_read(gate->map, ASPEED_CLK_STOP_CTRL, &reg);
+
+	return (reg & clk) ? 0 : 1;
+}
+
+static const struct clk_ops aspeed_clk_gate_ops = {
+	.enable = aspeed_clk_enable,
+	.disable = aspeed_clk_disable,
+	.is_enabled = aspeed_clk_is_enabled,
+};
+
+static struct clk_hw *aspeed_clk_hw_register_gate(struct device *dev,
+		const char *name, const char *parent_name, unsigned long flags,
+		struct regmap *map, u8 clock_idx, u8 reset_idx,
+		u8 clk_gate_flags, spinlock_t *lock)
+{
+	struct aspeed_clk_gate *gate;
+	struct clk_init_data init;
+	struct clk_hw *hw;
+	int ret;
+
+	gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+	if (!gate)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &aspeed_clk_gate_ops;
+	init.flags = flags | CLK_IS_BASIC;
+	init.parent_names = parent_name ? &parent_name : NULL;
+	init.num_parents = parent_name ? 1 : 0;
+
+	gate->map = map;
+	gate->clock_idx = clock_idx;
+	gate->reset_idx = reset_idx;
+	gate->flags = clk_gate_flags;
+	gate->lock = lock;
+	gate->hw.init = &init;
+
+	hw = &gate->hw;
+	ret = clk_hw_register(dev, hw);
+	if (ret) {
+		kfree(gate);
+		hw = ERR_PTR(ret);
+	}
+
+	return hw;
+}
+
 static int __init aspeed_clk_probe(struct platform_device *pdev)
 {
 	const struct aspeed_clk_soc_data *soc_data;
@@ -200,6 +302,7 @@ static int __init aspeed_clk_probe(struct platform_device *pdev)
 	struct regmap *map;
 	struct clk_hw *hw;
 	u32 val, rate;
+	int i;
 
 	map = syscon_node_to_regmap(dev->of_node);
 	if (IS_ERR(map)) {
@@ -269,6 +372,31 @@ static int __init aspeed_clk_probe(struct platform_device *pdev)
 			&aspeed_clk_lock);
 	aspeed_clk_data->hws[ASPEED_CLK_BCLK] = hw;
 
+	/* There are a number of clocks that not included in this driver as
+	 * more information is required:
+	 *   D2-PLL
+	 *   D-PLL
+	 *   YCLK
+	 *   RGMII
+	 *   RMII
+	 *   UART[1..5] clock source mux
+	 */
+
+	for (i = 0; i < ARRAY_SIZE(aspeed_gates); i++) {
+		const struct aspeed_gate_data *gd;
+
+		gd = &aspeed_gates[i];
+		aspeed_clk_data->hws[ASPEED_CLK_GATES + i] =
+			aspeed_clk_hw_register_gate(NULL, gd->name,
+					     gd->parent_name,
+					     gd->flags,
+					     map,
+					     gd->clock_idx,
+					     gd->reset_idx,
+					     CLK_GATE_SET_TO_DISABLE,
+					     &aspeed_clk_lock);
+	}
+
 	return 0;
 };
 
-- 
2.14.1

  parent reply	other threads:[~2017-09-21  4:27 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-21  4:26 [PATCH v2 0/5] clk: Add Aspeed clock driver Joel Stanley
2017-09-21  4:26 ` [PATCH v2 1/5] clk: Add clock driver for ASPEED BMC SoCs Joel Stanley
2017-09-25  3:40   ` Andrew Jeffery
2017-09-27  6:11     ` Joel Stanley
2017-09-21  4:26 ` [PATCH v2 2/5] clk: aspeed: Register core clocks Joel Stanley
2017-09-25 12:02   ` Andrew Jeffery
2017-09-27  6:13     ` Joel Stanley
2017-10-02 21:39   ` Stephen Boyd
2017-09-21  4:26 ` [PATCH v2 3/5] clk: aspeed: Add platform driver and register PLLs Joel Stanley
2017-09-25 12:40   ` Andrew Jeffery
2017-09-27  6:13     ` Joel Stanley
2017-09-27  7:34       ` Andrew Jeffery
2017-09-28  4:29         ` Joel Stanley
2017-10-02 21:24   ` Stephen Boyd
2017-10-03  5:48     ` Joel Stanley
2017-10-04 21:18       ` Stephen Boyd
2017-10-05  6:22         ` Joel Stanley
2017-09-21  4:26 ` Joel Stanley [this message]
2017-10-02 21:37   ` [PATCH v2 4/5] clk: aspeed: Register gated clocks Stephen Boyd
2017-10-03  5:47     ` Joel Stanley
2017-09-21  4:26 ` [PATCH v2 5/5] clk: aspeed: Add reset controller Joel Stanley
2017-09-25 12:54   ` Andrew Jeffery
2017-09-27  6:13     ` Joel Stanley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170921042641.7326-5-joel@jms.id.au \
    --to=joel@jms.id.au \
    --cc=andrew@aj.id.au \
    --cc=arnd@arndb.de \
    --cc=benh@kernel.crashing.org \
    --cc=jk@ozlabs.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=raltherr@google.com \
    --cc=ryan_chen@aspeedtech.com \
    --cc=sboyd@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®